[PATCH v2 6/8] mmc: sunxi: Move the reset deassertion before enabling the clocks

Ulf Hansson ulf.hansson at linaro.org
Thu Mar 15 03:24:09 PDT 2018


On 8 March 2018 at 15:52, Maxime Ripard <maxime.ripard at bootlin.com> wrote:
> As per Allwinner guidelines, the reset line should be deasserted before
> turning the clocks on.
>
> Implement it in our driver as well.
>
> Signed-off-by: Maxime Ripard <maxime.ripard at bootlin.com>

Thanks, applied for next!

Kind regards
Uffe

> ---
>  drivers/mmc/host/sunxi-mmc.c | 36 ++++++++++++++++++------------------
>  1 file changed, 18 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
> index 34bc90bc04b2..c6431f6e816f 100644
> --- a/drivers/mmc/host/sunxi-mmc.c
> +++ b/drivers/mmc/host/sunxi-mmc.c
> @@ -1188,10 +1188,19 @@ static int sunxi_mmc_enable(struct sunxi_mmc_host *host)
>  {
>         int ret;
>
> +       if (!IS_ERR(host->reset)) {
> +               ret = reset_control_reset(host->reset);
> +               if (ret) {
> +                       dev_err(host->dev, "Couldn't reset the MMC controller (%d)\n",
> +                               ret);
> +                       return ret;
> +               }
> +       }
> +
>         ret = clk_prepare_enable(host->clk_ahb);
>         if (ret) {
> -               dev_err(dev, "Couldn't enable the bus clocks (%d)\n", ret);
> -               return ret;
> +               dev_err(host->dev, "Couldn't enable the bus clocks (%d)\n", ret);
> +               goto error_assert_reset;
>         }
>
>         ret = clk_prepare_enable(host->clk_mmc);
> @@ -1212,28 +1221,16 @@ static int sunxi_mmc_enable(struct sunxi_mmc_host *host)
>                 goto error_disable_clk_output;
>         }
>
> -       if (!IS_ERR(host->reset)) {
> -               ret = reset_control_reset(host->reset);
> -               if (ret) {
> -                       dev_err(dev, "Couldn't reset the MMC controller (%d)\n",
> -                               ret);
> -                       goto error_disable_clk_sample;
> -               }
> -       }
> -
>         /*
>          * Sometimes the controller asserts the irq on boot for some reason,
>          * make sure the controller is in a sane state before enabling irqs.
>          */
>         ret = sunxi_mmc_reset_host(host);
>         if (ret)
> -               goto error_assert_reset;
> +               goto error_disable_clk_sample;
>
>         return 0;
>
> -error_assert_reset:
> -       if (!IS_ERR(host->reset))
> -               reset_control_assert(host->reset);
>  error_disable_clk_sample:
>         clk_disable_unprepare(host->clk_sample);
>  error_disable_clk_output:
> @@ -1242,6 +1239,9 @@ static int sunxi_mmc_enable(struct sunxi_mmc_host *host)
>         clk_disable_unprepare(host->clk_mmc);
>  error_disable_clk_ahb:
>         clk_disable_unprepare(host->clk_ahb);
> +error_assert_reset:
> +       if (!IS_ERR(host->reset))
> +               reset_control_assert(host->reset);
>         return ret;
>  }
>
> @@ -1249,13 +1249,13 @@ static void sunxi_mmc_disable(struct sunxi_mmc_host *host)
>  {
>         sunxi_mmc_reset_host(host);
>
> -       if (!IS_ERR(host->reset))
> -               reset_control_assert(host->reset);
> -
>         clk_disable_unprepare(host->clk_sample);
>         clk_disable_unprepare(host->clk_output);
>         clk_disable_unprepare(host->clk_mmc);
>         clk_disable_unprepare(host->clk_ahb);
> +
> +       if (!IS_ERR(host->reset))
> +               reset_control_assert(host->reset);
>  }
>
>  static int sunxi_mmc_resource_request(struct sunxi_mmc_host *host,
> --
> git-series 0.9.1



More information about the linux-arm-kernel mailing list