[PATCH 1/2] cec: stm32: simplify clock management
Benjamin Gaignard
benjamin.gaignard at linaro.org
Thu Mar 15 02:29:48 PDT 2018
From: Benjamin Gaignard <benjamin.gaignard at linaro.org>
Since CEC framework enable and disable the adapter when it is needed
just follow it orders to enable/disable the clocks.
Call stm32_cec_hw_init() when the adapter is enabled and do not let
regmap manage registers clock help to simplify clocking scheme.
While reworking cec clock start using pm_runtime.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard at linaro.org>
---
drivers/media/platform/stm32/stm32-cec.c | 70 ++++++++++++++++++--------------
1 file changed, 40 insertions(+), 30 deletions(-)
diff --git a/drivers/media/platform/stm32/stm32-cec.c b/drivers/media/platform/stm32/stm32-cec.c
index 7c496bc1cf38..35cc2ffd6b96 100644
--- a/drivers/media/platform/stm32/stm32-cec.c
+++ b/drivers/media/platform/stm32/stm32-cec.c
@@ -12,6 +12,7 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <media/cec.h>
@@ -70,7 +71,7 @@ struct stm32_cec {
int tx_cnt;
};
-static void cec_hw_init(struct stm32_cec *cec)
+static void stm32_cec_hw_init(struct stm32_cec *cec)
{
regmap_update_bits(cec->regmap, CEC_CR, TXEOM | TXSOM | CECEN, 0);
@@ -166,22 +167,17 @@ static irqreturn_t stm32_cec_irq_handler(int irq, void *arg)
static int stm32_cec_adap_enable(struct cec_adapter *adap, bool enable)
{
struct stm32_cec *cec = adap->priv;
- int ret = 0;
if (enable) {
- ret = clk_enable(cec->clk_cec);
- if (ret)
- dev_err(cec->dev, "fail to enable cec clock\n");
-
- clk_enable(cec->clk_hdmi_cec);
+ pm_runtime_get_sync(cec->dev);
+ stm32_cec_hw_init(cec);
regmap_update_bits(cec->regmap, CEC_CR, CECEN, CECEN);
} else {
- clk_disable(cec->clk_cec);
- clk_disable(cec->clk_hdmi_cec);
regmap_update_bits(cec->regmap, CEC_CR, CECEN, 0);
+ pm_runtime_disable(cec->dev);
}
- return ret;
+ return 0;
}
static int stm32_cec_adap_log_addr(struct cec_adapter *adap, u8 logical_addr)
@@ -260,8 +256,8 @@ static int stm32_cec_probe(struct platform_device *pdev)
if (IS_ERR(mmio))
return PTR_ERR(mmio);
- cec->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "cec", mmio,
- &stm32_cec_regmap_cfg);
+ cec->regmap = devm_regmap_init_mmio(&pdev->dev, mmio,
+ &stm32_cec_regmap_cfg);
if (IS_ERR(cec->regmap))
return PTR_ERR(cec->regmap);
@@ -284,19 +280,10 @@ static int stm32_cec_probe(struct platform_device *pdev)
return PTR_ERR(cec->clk_cec);
}
- ret = clk_prepare(cec->clk_cec);
- if (ret) {
- dev_err(&pdev->dev, "Unable to prepare cec clock\n");
- return ret;
- }
-
cec->clk_hdmi_cec = devm_clk_get(&pdev->dev, "hdmi-cec");
- if (!IS_ERR(cec->clk_hdmi_cec)) {
- ret = clk_prepare(cec->clk_hdmi_cec);
- if (ret) {
- dev_err(&pdev->dev, "Unable to prepare hdmi-cec clock\n");
- return ret;
- }
+ if (IS_ERR(cec->clk_hdmi_cec)) {
+ dev_err(&pdev->dev, "Cannot get cec clock\n");
+ return PTR_ERR(cec->clk_hdmi_cec);
}
/*
@@ -315,24 +302,46 @@ static int stm32_cec_probe(struct platform_device *pdev)
return ret;
}
- cec_hw_init(cec);
-
platform_set_drvdata(pdev, cec);
+ pm_runtime_enable(&pdev->dev);
- return 0;
+ return ret;
}
static int stm32_cec_remove(struct platform_device *pdev)
{
struct stm32_cec *cec = platform_get_drvdata(pdev);
- clk_unprepare(cec->clk_cec);
- clk_unprepare(cec->clk_hdmi_cec);
-
cec_unregister_adapter(cec->adap);
+ pm_runtime_disable(&pdev->dev);
+
return 0;
}
+static int __maybe_unused stm32_cec_runtime_suspend(struct device *dev)
+{
+ struct stm32_cec *cec = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(cec->clk_cec);
+ clk_disable_unprepare(cec->clk_hdmi_cec);
+
+ return 0;
+}
+
+static int __maybe_unused stm32_cec_runtime_resume(struct device *dev)
+{
+ struct stm32_cec *cec = dev_get_drvdata(dev);
+
+ clk_prepare_enable(cec->clk_cec);
+ clk_prepare_enable(cec->clk_hdmi_cec);
+
+ return 0;
+}
+
+static const struct dev_pm_ops stm32_cec_pm_ops = {
+ SET_RUNTIME_PM_OPS(stm32_cec_runtime_suspend, stm32_cec_runtime_resume,
+ NULL)
+};
static const struct of_device_id stm32_cec_of_match[] = {
{ .compatible = "st,stm32-cec" },
@@ -346,6 +355,7 @@ static struct platform_driver stm32_cec_driver = {
.driver = {
.name = CEC_NAME,
.of_match_table = stm32_cec_of_match,
+ .pm = &stm32_cec_pm_ops,
},
};
--
2.15.0
More information about the linux-arm-kernel
mailing list