[PATCH v2 0/6] ARM: OMAP5: add support for fref-xtal-clk

[Peter Ujfalusi]

Hi,

Changes since v1 (sent by Tero):
- Rebased on linux-next
- Split the dts and binding document patch
- Tested it on omap5-uevm that the HPPLL of twl6040 is working (xtal clock is
  suplied)

The v1 of this series was sent about two years ago:
http://linux-arm-kernel.infradead.narkive.com/hBBbM4D7/patch-0-5-arm-omap5-add-support-for-fref-xtal-clk

but for some reason it was not applied back then, but I have been rolling it on
top of linux-next ever since.

Regards,
Peter
---
Peter Ujfalusi (1):
  ARM: dts: omap5-board-common: Add phandle for mclk clock for twl6040

Tero Kristo (5):
  ARM: omap2+: control: add support for auxiliary control module
    instances
  dt-bindings: omap5: ctrl: Support for control module wkup pad config
  ARM: dts: omap5: add support for control module wkup pad config
  ARM: OMAP5: control: add support for control module wkup pad config
  ARM: dts: omap5: add fref_xtal_ck support

 .../devicetree/bindings/arm/omap/ctrl.txt          |  1 +
 arch/arm/boot/dts/omap5-board-common.dtsi          |  4 ++--
 arch/arm/boot/dts/omap5.dtsi                       | 22 ++++++++++++++++++++++
 arch/arm/boot/dts/omap54xx-clocks.dtsi             | 10 ++++++++++
 arch/arm/mach-omap2/control.c                      | 20 ++++++++++++++++----
 include/linux/clk/ti.h                             |  1 +
 6 files changed, 52 insertions(+), 6 deletions(-)

-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki