[PATCH] crypto: arm,arm64 - Fix random regeneration of S_shipped
Ard Biesheuvel
ard.biesheuvel at linaro.org
Wed Mar 14 00:45:44 PDT 2018
On 14 March 2018 at 02:31, Masahiro Yamada
<yamada.masahiro at socionext.com> wrote:
> 2018-03-14 5:17 GMT+09:00 Leonard Crestez <leonard.crestez at nxp.com>:
>> The decision to rebuild .S_shipped is made based on the relative
>> timestamps of .S_shipped and .pl files but git makes this essentially
>> random. This means that the perl script might run anyway (usually at
>> most once per checkout), defeating the whole purpose of _shipped.
>>
>> Fix by skipping the rule unless explicit make variables are provided:
>> REGENERATE_ARM_CRYPTO or REGENERATE_ARM64_CRYPTO.
>>
>> This can produce nasty occasional build failures downstream, for example
>> for toolchains with broken perl. The solution is minimally intrusive to
>> make it easier to push into stable.
>>
>> Another report on a similar issue here: https://lkml.org/lkml/2018/3/8/1379
>>
>> Signed-off-by: Leonard Crestez <leonard.crestez at nxp.com>
>> Cc: <stable at vger.kernel.org>
>> ---
>
>
>
> Reviewed-by: Masahiro Yamada <yamada.masahiro at socionext.com>
>
Acked-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
>
>
>> arch/arm/crypto/Makefile | 2 ++
>> arch/arm64/crypto/Makefile | 2 ++
>> 2 files changed, 4 insertions(+)
>>
>> Not clear if this needs to go through crypto or arm but all commits in these
>> directories start with "crypto:".
>>
>> My problems were only on arm64 because of a yocto toolchain which ships a version
>> of perl which fails on "use integer;".
>>
>> CC stable because this can cause trouble for downstream packagers.
>>
>> diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile
>> index 30ef8e2..c9919c2 100644
>> --- a/arch/arm/crypto/Makefile
>> +++ b/arch/arm/crypto/Makefile
>> @@ -47,20 +47,22 @@ sha256-arm-y := sha256-core.o sha256_glue.o $(sha256-arm-neon-y)
>> sha512-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha512-neon-glue.o
>> sha512-arm-y := sha512-core.o sha512-glue.o $(sha512-arm-neon-y)
>> sha1-arm-ce-y := sha1-ce-core.o sha1-ce-glue.o
>> sha2-arm-ce-y := sha2-ce-core.o sha2-ce-glue.o
>> aes-arm-ce-y := aes-ce-core.o aes-ce-glue.o
>> ghash-arm-ce-y := ghash-ce-core.o ghash-ce-glue.o
>> crct10dif-arm-ce-y := crct10dif-ce-core.o crct10dif-ce-glue.o
>> crc32-arm-ce-y:= crc32-ce-core.o crc32-ce-glue.o
>> chacha20-neon-y := chacha20-neon-core.o chacha20-neon-glue.o
>>
>> +ifdef REGENERATE_ARM_CRYPTO
>> quiet_cmd_perl = PERL $@
>> cmd_perl = $(PERL) $(<) > $(@)
>>
>> $(src)/sha256-core.S_shipped: $(src)/sha256-armv4.pl
>> $(call cmd,perl)
>>
>> $(src)/sha512-core.S_shipped: $(src)/sha512-armv4.pl
>> $(call cmd,perl)
>> +endif
>>
>> .PRECIOUS: $(obj)/sha256-core.S $(obj)/sha512-core.S
>> diff --git a/arch/arm64/crypto/Makefile b/arch/arm64/crypto/Makefile
>> index cee9b8d9..dfe651b 100644
>> --- a/arch/arm64/crypto/Makefile
>> +++ b/arch/arm64/crypto/Makefile
>> @@ -60,20 +60,22 @@ obj-$(CONFIG_CRYPTO_AES_ARM64_BS) += aes-neon-bs.o
>> aes-neon-bs-y := aes-neonbs-core.o aes-neonbs-glue.o
>>
>> AFLAGS_aes-ce.o := -DINTERLEAVE=4
>> AFLAGS_aes-neon.o := -DINTERLEAVE=4
>>
>> CFLAGS_aes-glue-ce.o := -DUSE_V8_CRYPTO_EXTENSIONS
>>
>> $(obj)/aes-glue-%.o: $(src)/aes-glue.c FORCE
>> $(call if_changed_rule,cc_o_c)
>>
>> +ifdef REGENERATE_ARM64_CRYPTO
>> quiet_cmd_perlasm = PERLASM $@
>> cmd_perlasm = $(PERL) $(<) void $(@)
>>
>> $(src)/sha256-core.S_shipped: $(src)/sha512-armv8.pl
>> $(call cmd,perlasm)
>>
>> $(src)/sha512-core.S_shipped: $(src)/sha512-armv8.pl
>> $(call cmd,perlasm)
>> +endif
>>
>> .PRECIOUS: $(obj)/sha256-core.S $(obj)/sha512-core.S
>> --
>> 2.7.4
>>
>
>
>
> --
> Best Regards
> Masahiro Yamada
More information about the linux-arm-kernel
mailing list