[PATCH v1 5/8] dmaengine: stm32-dma: fix max items per transfer
Pierre-Yves MORDRET
pierre-yves.mordret at st.com
Tue Mar 13 09:42:04 PDT 2018
Having 0 in item counter register is valid and stands for a "No or Ended
transfer". Therefore valid transfer starts from @+0 to @+0xFFFE leading to
unaligned scatter gather at boundary. Thus it's safer to round down this
value on its FIFO size (16 Bytes).
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret at st.com>
---
Version history:
v1:
* Initial
---
---
drivers/dma/stm32-dma.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c
index 0685961..f9d3c84 100644
--- a/drivers/dma/stm32-dma.c
+++ b/drivers/dma/stm32-dma.c
@@ -38,10 +38,6 @@
#define STM32_DMA_TEI BIT(3) /* Transfer Error Interrupt */
#define STM32_DMA_DMEI BIT(2) /* Direct Mode Error Interrupt */
#define STM32_DMA_FEI BIT(0) /* FIFO Error Interrupt */
-#define STM32_DMA_MASKI (STM32_DMA_TCI \
- | STM32_DMA_TEI \
- | STM32_DMA_DMEI \
- | STM32_DMA_FEI)
/* DMA Stream x Configuration Register */
#define STM32_DMA_SCR(x) (0x0010 + 0x18 * (x)) /* x = 0..7 */
@@ -117,6 +113,13 @@
#define STM32_DMA_FIFO_THRESHOLD_FULL 0x03
#define STM32_DMA_MAX_DATA_ITEMS 0xffff
+/*
+ * Valid transfer starts from @0 to @0xFFFE leading to unaligned scatter
+ * gather at boundary. Thus it's safer to round down this value on FIFO
+ * size (16 Bytes)
+ */
+#define STM32_DMA_ALIGNED_MAX_DATA_ITEMS \
+ ALIGN_DOWN(STM32_DMA_MAX_DATA_ITEMS, 16)
#define STM32_DMA_MAX_CHANNELS 0x08
#define STM32_DMA_MAX_REQUEST_ID 0x08
#define STM32_DMA_MAX_DATA_PARAM 0x03
@@ -864,7 +867,7 @@ static struct dma_async_tx_descriptor *stm32_dma_prep_slave_sg(
desc->sg_req[i].len = sg_dma_len(sg);
nb_data_items = desc->sg_req[i].len / buswidth;
- if (nb_data_items > STM32_DMA_MAX_DATA_ITEMS) {
+ if (nb_data_items > STM32_DMA_ALIGNED_MAX_DATA_ITEMS) {
dev_err(chan2dev(chan), "nb items not supported\n");
goto err;
}
@@ -930,7 +933,7 @@ static struct dma_async_tx_descriptor *stm32_dma_prep_dma_cyclic(
return NULL;
nb_data_items = period_len / buswidth;
- if (nb_data_items > STM32_DMA_MAX_DATA_ITEMS) {
+ if (nb_data_items > STM32_DMA_ALIGNED_MAX_DATA_ITEMS) {
dev_err(chan2dev(chan), "number of items not supported\n");
return NULL;
}
@@ -980,7 +983,7 @@ static struct dma_async_tx_descriptor *stm32_dma_prep_dma_memcpy(
u32 num_sgs, best_burst, dma_burst, threshold;
int i;
- num_sgs = DIV_ROUND_UP(len, STM32_DMA_MAX_DATA_ITEMS);
+ num_sgs = DIV_ROUND_UP(len, STM32_DMA_ALIGNED_MAX_DATA_ITEMS);
desc = stm32_dma_alloc_desc(num_sgs);
if (!desc)
return NULL;
@@ -989,7 +992,7 @@ static struct dma_async_tx_descriptor *stm32_dma_prep_dma_memcpy(
for (offset = 0, i = 0; offset < len; offset += xfer_count, i++) {
xfer_count = min_t(size_t, len - offset,
- STM32_DMA_MAX_DATA_ITEMS);
+ STM32_DMA_ALIGNED_MAX_DATA_ITEMS);
/* Compute best burst size */
max_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
--
2.7.4
More information about the linux-arm-kernel
mailing list