[PATCH 05/39] arm64: Make USER_DS an inclusive limit

Alex Shi alex.shi at linaro.org
Fri Mar 9 01:06:48 PST 2018


From: Robin Murphy <robin.murphy at arm.com>

Commit 51369e398d0d upstream.

Currently, USER_DS represents an exclusive limit while KERNEL_DS is
inclusive. In order to do some clever trickery for speculation-safe
masking, we need them both to behave equivalently - there aren't enough
bits to make KERNEL_DS exclusive, so we have precisely one option. This
also happens to correct a longstanding false negative for a range
ending on the very top byte of kernel memory.

Mark Rutland points out that we've actually got the semantics of
addresses vs. segments muddled up in most of the places we need to
amend, so shuffle the {USER,KERNEL}_DS definitions around such that we
can correct those properly instead of just pasting "-1"s everywhere.

Signed-off-by: Robin Murphy <robin.murphy at arm.com>
Signed-off-by: Will Deacon <will.deacon at arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas at arm.com>
Signed-off-by: Alex Shi <alex.shi at linaro.org>
---
 arch/arm64/include/asm/processor.h |  3 ++
 arch/arm64/include/asm/uaccess.h   | 45 +++++++++++++++++-------------
 arch/arm64/kernel/entry.S          |  2 +-
 3 files changed, 30 insertions(+), 20 deletions(-)

diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index 12d5b2b97f04..c49597ae529d 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -21,6 +21,9 @@
 
 #define TASK_SIZE_64		(UL(1) << VA_BITS)
 
+#define KERNEL_DS	UL(-1)
+#define USER_DS		(TASK_SIZE_64 - 1)
+
 #ifndef __ASSEMBLY__
 
 /*
diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h
index 829fa6d3e561..c625cc5531fc 100644
--- a/arch/arm64/include/asm/uaccess.h
+++ b/arch/arm64/include/asm/uaccess.h
@@ -56,10 +56,7 @@ struct exception_table_entry
 
 extern int fixup_exception(struct pt_regs *regs);
 
-#define KERNEL_DS	(-1UL)
 #define get_ds()	(KERNEL_DS)
-
-#define USER_DS		TASK_SIZE_64
 #define get_fs()	(current_thread_info()->addr_limit)
 
 static inline void set_fs(mm_segment_t fs)
@@ -87,22 +84,32 @@ static inline void set_fs(mm_segment_t fs)
  * Returns 1 if the range is valid, 0 otherwise.
  *
  * This is equivalent to the following test:
- * (u65)addr + (u65)size <= current->addr_limit
- *
- * This needs 65-bit arithmetic.
+ * (u65)addr + (u65)size <= (u65)current->addr_limit + 1
  */
-#define __range_ok(addr, size)						\
-({									\
-	unsigned long __addr = (unsigned long __force)(addr);		\
-	unsigned long flag, roksum;					\
-	__chk_user_ptr(addr);						\
-	asm("adds %1, %1, %3; ccmp %1, %4, #2, cc; cset %0, ls"		\
-		: "=&r" (flag), "=&r" (roksum)				\
-		: "1" (__addr), "Ir" (size),				\
-		  "r" (current_thread_info()->addr_limit)		\
-		: "cc");						\
-	flag;								\
-})
+static inline unsigned long __range_ok(unsigned long addr, unsigned long size)
+{
+	unsigned long limit = current_thread_info()->addr_limit;
+
+	__chk_user_ptr(addr);
+	asm volatile(
+	// A + B <= C + 1 for all A,B,C, in four easy steps:
+	// 1: X = A + B; X' = X % 2^64
+	"	adds	%0, %0, %2\n"
+	// 2: Set C = 0 if X > 2^64, to guarantee X' > C in step 4
+	"	csel	%1, xzr, %1, hi\n"
+	// 3: Set X' = ~0 if X >= 2^64. For X == 2^64, this decrements X'
+	//    to compensate for the carry flag being set in step 4. For
+	//    X > 2^64, X' merely has to remain nonzero, which it does.
+	"	csinv	%0, %0, xzr, cc\n"
+	// 4: For X < 2^64, this gives us X' - C - 1 <= 0, where the -1
+	//    comes from the carry in being clear. Otherwise, we are
+	//    testing X' - C == 0, subject to the previous adjustments.
+	"	sbcs	xzr, %0, %1\n"
+	"	cset	%0, ls\n"
+	: "+r" (addr), "+r" (limit) : "Ir" (size) : "cc");
+
+	return addr;
+}
 
 /*
  * When dealing with data aborts, watchpoints, or instruction traps we may end
@@ -111,7 +118,7 @@ static inline void set_fs(mm_segment_t fs)
  */
 #define untagged_addr(addr)		sign_extend64(addr, 55)
 
-#define access_ok(type, addr, size)	__range_ok(addr, size)
+#define access_ok(type, addr, size)	__range_ok((unsigned long)(addr), size)
 #define user_addr_max			get_fs
 
 /*
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index fbb4fdd370b9..274898465a3f 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -99,7 +99,7 @@
 	/* Save the task's original addr_limit and set USER_DS (TASK_SIZE_64) */
 	ldr	x20, [tsk, #TI_ADDR_LIMIT]
 	str	x20, [sp, #S_ORIG_ADDR_LIMIT]
-	mov	x20, #TASK_SIZE_64
+	mov	x20, #USER_DS
 	str	x20, [tsk, #TI_ADDR_LIMIT]
 	.endif /* \el == 0 */
 	mrs	x22, elr_el1
-- 
2.16.2.440.gc6284da




More information about the linux-arm-kernel mailing list