[PATCH v4 1/2] ARM: dts: imx: Add basic dtsi file for imx6sll
Shawn Guo
shawnguo at kernel.org
Thu Mar 8 19:15:04 PST 2018
Looks pretty good, except that we should follow device tree
specification recommendation to name device as much as possible.
https://github.com/devicetree-org/devicetree-specification/releases/tag/v0.2
On Thu, Mar 08, 2018 at 06:03:43PM +0800, Bai Ping wrote:
> diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
> new file mode 100644
> index 0000000..3fb1156
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6sll.dtsi
> @@ -0,0 +1,806 @@
> +//SPDX-License-Identifier: (GPL-2.0 OR MIT)
There should be space right after //
> +/*
> + * Copyright 2016 Freescale Semiconductor, Inc.
> + * Copyright 2017-2018 NXP.
> + *
> + */
> +
> +#include <dt-bindings/clock/imx6sll-clock.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include "imx6sll-pinfunc.h"
> +
> +/ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + aliases {
> + gpio0 = &gpio1;
> + gpio1 = &gpio2;
> + gpio2 = &gpio3;
> + gpio3 = &gpio4;
> + gpio4 = &gpio5;
> + gpio5 = &gpio6;
> + i2c0 = &i2c1;
> + i2c1 = &i2c2;
> + i2c2 = &i2c3;
> + mmc0 = &usdhc1;
> + mmc1 = &usdhc2;
> + mmc2 = &usdhc3;
> + serial0 = &uart1;
> + serial1 = &uart2;
> + serial2 = &uart3;
> + serial3 = &uart4;
> + serial4 = &uart5;
> + spi0 = &ecspi1;
> + spi1 = &ecspi2;
> + spi3 = &ecspi3;
> + spi4 = &ecspi4;
> + usbphy0 = &usbphy1;
> + usbphy1 = &usbphy2;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu at 0 {
> + compatible = "arm,cortex-a9";
> + device_type = "cpu";
> + reg = <0>;
> + next-level-cache = <&L2>;
> + operating-points = <
> + /* kHz uV */
> + 996000 1225000
> + 792000 1175000
> + 396000 1075000
> + 198000 975000
> + >;
> + fsl,soc-operating-points = <
> + /* ARM kHz SOC-PU uV */
> + 996000 1225000
> + 792000 1175000
> + 396000 1175000
> + 198000 1175000
> + >;
> + clock-latency = <61036>; /* two CLK32 periods */
> + fsl,low-power-run;
What is this?
> + clocks = <&clks IMX6SLL_CLK_ARM>,
> + <&clks IMX6SLL_CLK_PLL2_PFD2>,
> + <&clks IMX6SLL_CLK_STEP>,
> + <&clks IMX6SLL_CLK_PLL1_SW>,
> + <&clks IMX6SLL_CLK_PLL1_SYS>,
> + <&clks IMX6SLL_CLK_PLL1>,
> + <&clks IMX6SLL_PLL1_BYPASS>,
> + <&clks IMX6SLL_PLL1_BYPASS_SRC>;
> + clock-names = "arm", "pll2_pfd2_396m", "step",
> + "pll1_sw", "pll1_sys", "pll1", "pll1_bypass",
> + "pll1_bypass_src";
> + };
> + };
> +
> + intc: interrupt-controller at a01000 {
> + compatible = "arm,cortex-a9-gic";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + reg = <0x00a01000 0x1000>,
> + <0x00a00100 0x100>;
> + interrupt-parent = <&intc>;
> + };
> +
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <0>;
As requested by DT maintainer, please drop this container node and give
an unique name for each fixed-clock, something like:
clock-xxx {
...
};
You may want to refer to how Lucas did it for i.MX8QM.
> +
> + ckil: clock at 0 {
> + compatible = "fixed-clock";
> + reg = <0>;
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + clock-output-names = "ckil";
> + };
> +
> + osc: clock at 1 {
> + compatible = "fixed-clock";
> + reg = <1>;
> + #clock-cells = <0>;
> + clock-frequency = <24000000>;
> + clock-output-names = "osc";
> + };
> +
> + ipp_di0: clock at 2 {
> + compatible = "fixed-clock";
> + reg = <2>;
> + #clock-cells = <0>;
> + clock-frequency = <0>;
> + clock-output-names = "ipp_di0";
> + };
> +
> + ipp_di1: clock at 3 {
> + compatible = "fixed-clock";
> + reg = <3>;
> + #clock-cells = <0>;
> + clock-frequency = <0>;
> + clock-output-names = "ipp_di1";
> + };
> + };
> +
> + soc {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> + interrupt-parent = <&gpc>;
> + ranges;
> +
> + ocram: sram at 900000 {
> + compatible = "mmio-sram";
> + reg = <0x00900000 0x20000>;
> + };
> +
> + L2: l2-cache at a02000 {
> + compatible = "arm,pl310-cache";
> + reg = <0x00a02000 0x1000>;
> + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
> + cache-unified;
> + cache-level = <2>;
> + arm,tag-latency = <4 2 3>;
> + arm,data-latency = <4 2 3>;
> + };
> +
> + aips1: aips-bus at 2000000 {
> + compatible = "fsl,aips-bus", "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x02000000 0x100000>;
> + ranges;
> +
> + spba: spba-bus at 2000000 {
> + compatible = "fsl,spba-bus", "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x02000000 0x40000>;
> + ranges;
> +
> + spdif: spdif at 2004000 {
> + compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif";
> + reg = <0x02004000 0x4000>;
> + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&sdma 14 18 0>, <&sdma 15 18 0>;
> + dma-names = "rx", "tx";
> + clocks = <&clks IMX6SLL_CLK_SPDIF_GCLK>,
> + <&clks IMX6SLL_CLK_OSC>,
> + <&clks IMX6SLL_CLK_SPDIF>,
> + <&clks IMX6SLL_CLK_DUMMY>,
> + <&clks IMX6SLL_CLK_DUMMY>,
> + <&clks IMX6SLL_CLK_DUMMY>,
> + <&clks IMX6SLL_CLK_IPG>,
> + <&clks IMX6SLL_CLK_DUMMY>,
> + <&clks IMX6SLL_CLK_DUMMY>,
> + <&clks IMX6SLL_CLK_SPBA>;
> + clock-names = "core", "rxtx0",
> + "rxtx1", "rxtx2",
> + "rxtx3", "rxtx4",
> + "rxtx5", "rxtx6",
> + "rxtx7", "dma";
> + status = "disabled";
> + };
> +
> + ecspi1: ecspi at 2008000 {
s/ecspi/spi for node name.
> + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
> + reg = <0x02008000 0x4000>;
> + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
> + dma-names = "rx", "tx";
> + clocks = <&clks IMX6SLL_CLK_ECSPI1>,
> + <&clks IMX6SLL_CLK_ECSPI1>;
> + clock-names = "ipg", "per";
> + status = "disabled";
> + };
> +
> + ecspi2: ecspi at 200c000 {
> + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
> + reg = <0x0200c000 0x4000>;
> + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
> + dma-names = "rx", "tx";
> + clocks = <&clks IMX6SLL_CLK_ECSPI2>,
> + <&clks IMX6SLL_CLK_ECSPI2>;
> + clock-names = "ipg", "per";
> + status = "disabled";
> + };
> +
> + ecspi3: ecspi at 2010000 {
> + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
> + reg = <0x02010000 0x4000>;
> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
> + dma-names = "rx", "tx";
> + clocks = <&clks IMX6SLL_CLK_ECSPI3>,
> + <&clks IMX6SLL_CLK_ECSPI3>;
> + clock-names = "ipg", "per";
> + status = "disabled";
> + };
> +
> + ecspi4: ecspi at 2014000 {
> + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
> + reg = <0x02014000 0x4000>;
> + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
> + dma-names = "rx", "tx";
> + clocks = <&clks IMX6SLL_CLK_ECSPI4>,
> + <&clks IMX6SLL_CLK_ECSPI4>;
> + clock-names = "ipg", "per";
> + status = "disabled";
> + };
> +
> + uart4: serial at 2018000 {
> + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
> + reg = <0x02018000 0x4000>;
> + interrupts =<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
> + dma-names = "rx", "tx";
> + clocks = <&clks IMX6SLL_CLK_UART4_IPG>,
> + <&clks IMX6SLL_CLK_UART4_SERIAL>;
> + clock-names = "ipg", "per";
> + status = "disabled";
> + };
> +
> + uart1: serial at 2020000 {
> + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
> + reg = <0x02020000 0x4000>;
> + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
> + dma-names = "rx", "tx";
> + clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
> + <&clks IMX6SLL_CLK_UART1_SERIAL>;
> + clock-names = "ipg", "per";
> + status = "disabled";
> + };
> +
> + uart2: serial at 2024000 {
> + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
> + reg = <0x02024000 0x4000>;
> + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
> + dma-names = "rx", "tx";
> + clocks = <&clks IMX6SLL_CLK_UART2_IPG>,
> + <&clks IMX6SLL_CLK_UART2_SERIAL>;
> + clock-names = "ipg", "per";
> + status = "disabled";
> + };
> +
> + ssi1: ssi at 2028000 {
ssi-controller
> + compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
> + reg = <0x02028000 0x4000>;
> + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&sdma 37 22 0>, <&sdma 38 22 0>;
> + dma-names = "rx", "tx";
> + fsl,fifo-depth = <15>;
> + clocks = <&clks IMX6SLL_CLK_SSI1_IPG>,
> + <&clks IMX6SLL_CLK_SSI1>;
> + clock-names = "ipg", "baud";
> + status = "disabled";
> + };
> +
> + ssi2: ssi2 at 202c000 {
Drop 2 from node name.
> + compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
> + reg = <0x0202c000 0x4000>;
> + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&sdma 41 22 0>, <&sdma 42 22 0>;
> + dma-names = "rx", "tx";
> + fsl,fifo-depth = <15>;
> + clocks = <&clks IMX6SLL_CLK_SSI2_IPG>,
> + <&clks IMX6SLL_CLK_SSI2>;
> + clock-names = "ipg", "baud";
> + status = "disabled";
> + };
> +
> + ssi3: ssi at 2030000 {
> + compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
> + reg = <0x02030000 0x4000>;
> + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&sdma 45 22 0>, <&sdma 46 22 0>;
> + dma-names = "rx", "tx";
> + fsl,fifo-depth = <15>;
> + clocks = <&clks IMX6SLL_CLK_SSI3_IPG>,
> + <&clks IMX6SLL_CLK_SSI3>;
> + clock-names = "ipg", "baud";
> + status = "disabled";
> + };
> +
> + uart3: serial at 2034000 {
> + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
> + reg = <0x02034000 0x4000>;
> + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
> + dma-name = "rx", "tx";
> + clocks = <&clks IMX6SLL_CLK_UART3_IPG>,
> + <&clks IMX6SLL_CLK_UART3_SERIAL>;
> + clock-names = "ipg", "per";
> + status = "disabled";
> + };
> + };
> +
> + pwm1: pwm at 2080000 {
> + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
> + reg = <0x02080000 0x4000>;
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6SLL_CLK_PWM1>,
> + <&clks IMX6SLL_CLK_PWM1>;
> + clock-names = "ipg", "per";
> + #pwm-cells = <2>;
> + };
> +
> + pwm2: pwm at 2084000 {
> + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
> + reg = <0x02084000 0x4000>;
> + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6SLL_CLK_PWM2>,
> + <&clks IMX6SLL_CLK_PWM2>;
> + clock-names = "ipg", "per";
> + #pwm-cells = <2>;
> + };
> +
> + pwm3: pwm at 2088000 {
> + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
> + reg = <0x02088000 0x4000>;
> + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6SLL_CLK_PWM3>,
> + <&clks IMX6SLL_CLK_PWM3>;
> + clock-names = "ipg", "per";
> + #pwm-cells = <2>;
> + };
> +
> + pwm4: pwm at 208c000 {
> + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
> + reg = <0x0208c000 0x4000>;
> + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6SLL_CLK_PWM4>,
> + <&clks IMX6SLL_CLK_PWM4>;
> + clock-names = "ipg", "per";
> + #pwm-cells = <2>;
> + };
> +
> + gpt1: gpt at 2098000 {
timer
> + compatible = "fsl,imx6sll-gpt";
> + reg = <0x02098000 0x4000>;
> + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6SLL_CLK_GPT_BUS>,
> + <&clks IMX6SLL_CLK_GPT_SERIAL>;
> + clock-names = "ipg", "per";
> + };
> +
> + gpio1: gpio at 209c000 {
> + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
> + reg = <0x0209c000 0x4000>;
> + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio2: gpio at 20a0000 {
> + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
> + reg = <0x020a0000 0x4000>;
> + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio3: gpio at 20a4000 {
> + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
> + reg = <0x020a4000 0x4000>;
> + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio4: gpio at 20a8000 {
> + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
> + reg = <0x020a8000 0x4000>;
> + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio5: gpio at 20ac000 {
> + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
> + reg = <0x020ac000 0x4000>;
> + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio6: gpio at 20b0000 {
> + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
> + reg = <0x020b0000 0x4000>;
> + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + kpp: kpp at 20b8000 {
s/kpp/keypad for node name.
> + compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp";
> + reg = <0x020b8000 0x4000>;
> + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6SLL_CLK_KPP>;
> + status = "disabled";
> + };
> +
> + wdog1: wdog at 20bc000 {
s/wdog/watchdog for node name.
> + compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
> + reg = <0x020bc000 0x4000>;
> + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6SLL_CLK_WDOG1>;
> + };
> +
> + wdog2: wdog at 20c0000 {
> + compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
> + reg = <0x020c0000 0x4000>;
> + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6SLL_CLK_WDOG2>;
> + status = "disabled";
> + };
> +
> + clks: clock-controller at 20c4000 {
> + compatible = "fsl,imx6sll-ccm";
> + reg = <0x020c4000 0x4000>;
> + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
> + #clock-cells = <1>;
> + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
> + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
> +
> + assigned-clocks = <&clks IMX6SLL_CLK_PERCLK_SEL>;
> + assigned-clock-parents = <&clks IMX6SLL_CLK_OSC>;
> + };
> +
> + anatop: anatop at 20c8000 {
> + compatible = "fsl,imx6sll-anatop",
> + "fsl,imx6q-anatop",
> + "syscon", "simple-bus";
> + reg = <0x020c8000 0x4000>;
> + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + reg_3p0: regulator-3p0 at 20c8120 {
> + compatible = "fsl,anatop-regulator";
> + reg = <0x20c8120>;
> + regulator-name = "vdd3p0";
> + regulator-min-microvolt = <2625000>;
> + regulator-max-microvolt = <3400000>;
> + anatop-reg-offset = <0x120>;
> + anatop-vol-bit-shift = <8>;
> + anatop-vol-bit-width = <5>;
> + anatop-min-bit-val = <0>;
> + anatop-min-voltage = <2625000>;
> + anatop-max-voltage = <3400000>;
> + anatop-enable-bit = <0>;
> + };
> + };
> +
> + tempmon: tempmon {
s/tempmon/temperature-sensor for node name.
> + compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
> + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
> + fsl,tempmon = <&anatop>;
> + fsl,tempmon-data = <&ocotp>;
> + clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
> + status = "disabled";
> + };
> +
> + usbphy1: usbphy at 20c9000 {
s/usbphy/usb-phy for node name.
> + compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
> + "fsl,imx23-usbphy";
> + reg = <0x020c9000 0x1000>;
> + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6SLL_CLK_USBPHY1>;
> + phy-3p0-supply = <®_3p0>;
> + fsl,anatop = <&anatop>;
> + };
> +
> + usbphy2: usbphy at 20ca000 {
> + compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
> + "fsl,imx23-usbphy";
> + reg = <0x020ca000 0x1000>;
> + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6SLL_CLK_USBPHY2>;
> + phy-reg_3p0-supply = <®_3p0>;
> + fsl,anatop = <&anatop>;
> + };
> +
> + snvs: snvs at 20cc000 {
> + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
> + reg = <0x020cc000 0x4000>;
> +
> + snvs_rtc: snvs-rtc-lp {
> + compatible = "fsl,sec-v4.0-mon-rtc-lp";
> + regmap = <&snvs>;
> + offset = <0x34>;
> + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + snvs_poweroff: snvs-poweroff {
> + compatible = "syscon-poweroff";
> + regmap = <&snvs>;
> + offset = <0x38>;
> + mask = <0x61>;
> + };
> +
> + snvs_pwrkey: snvs-powerkey {
> + compatible = "fsl,sec-v4.0-pwrkey";
> + regmap = <&snvs>;
> + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> + linux,keycode = <KEY_POWER>;
> + wakeup-source;
> + };
> + };
> +
> + epit1: epit at 20d0000 {
> + reg = <0x020d0000 0x4000>;
> + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + epit2: epit at 20d4000 {
> + reg = <0x020d4000 0x4000>;
> + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
> + };
No compatible, so unused?
> +
> + src: src at 20d8000 {
reset-controller
> + compatible = "fsl,imx6sll-src";
> + reg = <0x020d8000 0x4000>;
> + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> + #reset-cells = <1>;
> + };
> +
> + gpc: gpc at 20dc000 {
interrupt-controller
> + compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc";
> + reg = <0x020dc000 0x4000>;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-parent = <&intc>;
> + fsl,mf-mix-wakeup-irq = <0x7c00000 0x7d00 0x0 0x1400640>;
What is this?
> + };
> +
> + iomuxc: iomuxc at 20e0000 {
> + compatible = "fsl,imx6sll-iomuxc";
> + reg = <0x020e0000 0x4000>;
> + };
> +
> + gpr: iomuxc-gpr at 20e4000 {
> + compatible = "fsl,imx6sll-iomuxc-gpr",
> + "fsl,imx6q-iomuxc-gpr", "syscon";
> + reg = <0x020e4000 0x4000>;
> + };
> +
> + csi: csi at 20e8000 {
> + compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi";
> + reg = <0x020e8000 0x4000>;
> + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6SLL_CLK_DUMMY>,
> + <&clks IMX6SLL_CLK_CSI>,
> + <&clks IMX6SLL_CLK_DUMMY>;
> + clock-names = "disp-axi", "csi_mclk", "disp_dcic";
> + status = "disabled";
> + };
> +
> + sdma: sdma at 20ec000 {
dma-controller
> + compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma";
> + reg = <0x020ec000 0x4000>;
> + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6SLL_CLK_SDMA>,
> + <&clks IMX6SLL_CLK_SDMA>;
> + clock-names = "ipg", "ahb";
> + #dma-cells = <3>;
> + iram = <&ocram>;
> + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
> + };
> +
> + lcdif: lcdif at 20f8000 {
lcd-controller
> + compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif";
> + reg = <0x020f8000 0x4000>;
> + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6SLL_CLK_LCDIF_PIX>,
> + <&clks IMX6SLL_CLK_LCDIF_APB>,
> + <&clks IMX6SLL_CLK_DUMMY>;
> + clock-names = "pix", "axi", "disp_axi";
> + status = "disabled";
> + };
> +
> + dcp: dcp at 20fc000 {
> + compatible = "fsl,imx6sl-dcp";
> + reg = <0x020fc000 0x4000>;
> + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6SLL_CLK_DCP>;
> + clock-names = "dcp";
> + };
> + };
> +
> + aips2: aips-bus at 2100000 {
> + compatible = "fsl,aips-bus", "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x02100000 0x100000>;
> + ranges;
> +
> + usbotg1: usb at 2184000 {
> + compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
> + "fsl,imx27-usb";
> + reg = <0x02184000 0x200>;
> + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6SLL_CLK_USBOH3>;
> + fsl,usbphy = <&usbphy1>;
> + fsl,usbmisc = <&usbmisc 0>;
> + fsl,anatop = <&anatop>;
> + ahb-burst-config = <0x0>;
> + tx-burst-size-dword = <0x10>;
> + rx-burst-size-dword = <0x10>;
> + status = "disabled";
> + };
> +
> + usbotg2: usb at 2184200 {
> + compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
> + "fsl,imx27-usb";
> + reg = <0x02184200 0x200>;
> + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6SLL_CLK_USBOH3>;
> + fsl,usbphy = <&usbphy2>;
> + fsl,usbmisc = <&usbmisc 1>;
> + ahb-burst-config = <0x0>;
> + tx-burst-size-dword = <0x10>;
> + rx-burst-size-dword = <0x10>;
> + status = "disabled";
> + };
> +
> + usbmisc: usbmisc at 2184800 {
> + #index-cells = <1>;
> + compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc",
> + "fsl,imx6q-usbmisc";
> + reg = <0x02184800 0x200>;
> + };
> +
> + usdhc1: usdhc at 2190000 {
s/usdhc/mmc for node name.
> + compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
> + reg = <0x02190000 0x4000>;
> + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6SLL_CLK_USDHC1>,
> + <&clks IMX6SLL_CLK_USDHC1>,
> + <&clks IMX6SLL_CLK_USDHC1>;
> + clock-names = "ipg", "ahb", "per";
> + bus-width = <4>;
> + fsl,tuning-step = <2>;
> + fsl,tuning-start-tap = <20>;
> + status = "disabled";
> + };
> +
> + usdhc2: usdhc at 2194000 {
> + compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
> + reg = <0x02194000 0x4000>;
> + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6SLL_CLK_USDHC2>,
> + <&clks IMX6SLL_CLK_USDHC2>,
> + <&clks IMX6SLL_CLK_USDHC2>;
> + clock-names = "ipg", "ahb", "per";
> + bus-width = <4>;
> + fsl,tuning-step = <2>;
> + fsl,tuning-start-tap = <20>;
> + status = "disabled";
> + };
> +
> + usdhc3: usdhc at 2198000 {
> + compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
> + reg = <0x02198000 0x4000>;
> + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6SLL_CLK_USDHC3>,
> + <&clks IMX6SLL_CLK_USDHC3>,
> + <&clks IMX6SLL_CLK_USDHC3>;
> + clock-names = "ipg", "ahb", "per";
> + bus-width = <4>;
> + fsl,tuning-step = <2>;
> + fsl,tuning-start-tap = <20>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c at 21a0000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fs,imx6sll-i2c", "fsl,imx21-i2c";
> + reg = <0x021a0000 0x4000>;
> + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6SLL_CLK_I2C1>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c at 21a4000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
> + reg = <0x021a4000 0x4000>;
> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6SLL_CLK_I2C2>;
> + status = "disabled";
> + };
> +
> + i2c3: i2c at 21a8000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
> + reg = <0x021a8000 0x4000>;
> + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6SLL_CLK_I2C3>;
> + status = "disabled";
> + };
> +
> + romcp at 21ac000 {
> + compatible = "fsl,imx6sll-romcp", "syscon";
> + reg = <0x021ac000 0x4000>;
> + };
> +
> + mmdc: mmdc at 21b0000 {
memory-controller
Shawn
> + compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc";
> + reg = <0x021b0000 0x4000>;
> + };
> +
> + rngb: rngb at 21b4000 {
> + reg = <0x021b4000 0x4000>;
> + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6SLL_CLK_DUMMY>;
> + };
> +
> + ocotp: ocotp-ctrl at 21bc000 {
> + compatible = "fsl,imx6sll-ocotp", "syscon";
> + reg = <0x021bc000 0x4000>;
> + clocks = <&clks IMX6SLL_CLK_OCOTP>;
> + };
> +
> + snvs_gpr: snvs-gpr at 21c4000 {
> + reg = <0x021c4000 0x10000>;
> + };
> +
> + iomuxc_snvs: iomuxc-snvs at 21c8000 {
> + reg = <0x021c8000 0x10000>;
> + };
> +
> + audmux: audmux at 21d8000 {
> + compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux";
> + reg = <0x021d8000 0x4000>;
> + status = "disabled";
> + };
> +
> + uart5: serial at 21f4000 {
> + compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
> + reg = <0x021f4000 0x4000>;
> + interrupts =<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
> + dma-names = "rx", "tx";
> + clocks = <&clks IMX6SLL_CLK_UART5_IPG>,
> + <&clks IMX6SLL_CLK_UART5_SERIAL>;
> + clock-names = "ipg", "per";
> + status = "disabled";
> + };
> + };
> + };
> +};
> --
> 1.9.1
>
More information about the linux-arm-kernel
mailing list