[PATCH v2 2/3] arm64: fpsimd: Fix bad si_code for undiagnosed SIGFPE
Eric W. Biederman
ebiederm at xmission.com
Thu Mar 8 14:37:02 PST 2018
Dave Martin <Dave.Martin at arm.com> writes:
> Currently a SIGFPE delivered in response to a floating-point
> exception trap may have si_code set to 0 on arm64. As reported by
> Eric, this is a bad idea since this is the value of SI_USER -- yet
> this signal is definitely not the result of kill(2), tgkill(2) etc.
> and si_uid and si_pid make limited sense whereas we do want to
> yield a value for si_addr (which doesn't exist for SI_USER).
>
> It's not entirely clear whether the architecure permits a
> "spurious" fp exception trap where none of the exception flag bits
> in ESR_ELx is set. (IMHO the architectural intent is to forbid
> this.) However, it does permit those bits to contain garbage if
> the TFV bit in ESR_ELx is 0. That case isn't currently handled at
> all and may result in si_code == 0 or si_code containing a FPE_FLT*
> constant corresponding to an exception that did not in fact happen.
>
> There is nothing sensible we can return for si_code in such cases,
> but SI_USER is certainly not appropriate and will lead to violation
> of legitimate userspace assumptions.
>
> This patch allocates a new si_code value FPE_UNKNOWN that at least
> does not conflict with any existing SI_* or FPE_* code, and yields
> this in si_code for undiagnosable cases. This is probably the best
> simplicity/incorrectness tradeoff achieveable without relying on
> implementation-dependent features or adding a lot of code. In any
> case, there appears to be no perfect solution possible that would
> justify a lot of effort here.
>
> Yielding FPE_UNKNOWN when some well-defined fp exception caused the
> trap is a violation of POSIX, but this is forced by the
> architecture. We have no realistic prospect of yielding the
> correct code in such cases. At present I am not aware of any ARMv8
> implementation that supports trapped floating-point exceptions in
> any case.
>
> The new code may be applicable to other architectures for similar
> reasons.
>
> No attempt is made to provide ESR_ELx to userspace in the signal
> frame, since architectural limitations mean that it is unlikely to
> provide much diagnostic value, doesn't benefit existing software
> and would create ABI with no proven purpose. The existing
> mechanism for passing it also has problems of its own which may
> result in the wrong value being passed to userspace due to
> interaction with mm faults. The implied rework does not appear
> justified.
>
> Reported-by: Eric W. Biederman <ebiederm at xmission.com>
> Signed-off-by: Dave Martin <Dave.Martin at arm.com>
Acked-by: "Eric W. Biederman" <ebiederm at xmission.com>
> ---
> arch/arm64/include/asm/esr.h | 9 +++++++++
> arch/arm64/include/uapi/asm/siginfo.h | 7 -------
> arch/arm64/kernel/fpsimd.c | 27 +++++++++++++++------------
> 3 files changed, 24 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm64/include/asm/esr.h b/arch/arm64/include/asm/esr.h
> index 803443d..ce70c3f 100644
> --- a/arch/arm64/include/asm/esr.h
> +++ b/arch/arm64/include/asm/esr.h
> @@ -240,6 +240,15 @@
> (((e) & ESR_ELx_SYS64_ISS_OP2_MASK) >> \
> ESR_ELx_SYS64_ISS_OP2_SHIFT))
>
> +/*
> + * ISS field definitions for floating-point exception traps
> + * (FP_EXC_32/FP_EXC_64).
> + *
> + * (The FPEXC_* constants are used instead for common bits.)
> + */
> +
> +#define ESR_ELx_FP_EXC_TFV (UL(1) << 23)
> +
> #ifndef __ASSEMBLY__
> #include <asm/types.h>
>
> diff --git a/arch/arm64/include/uapi/asm/siginfo.h b/arch/arm64/include/uapi/asm/siginfo.h
> index 9b4d912..157e6a8 100644
> --- a/arch/arm64/include/uapi/asm/siginfo.h
> +++ b/arch/arm64/include/uapi/asm/siginfo.h
> @@ -22,13 +22,6 @@
> #include <asm-generic/siginfo.h>
>
> /*
> - * SIGFPE si_codes
> - */
> -#ifdef __KERNEL__
> -#define FPE_FIXME 0 /* Broken dup of SI_USER */
> -#endif /* __KERNEL__ */
> -
> -/*
> * SIGBUS si_codes
> */
> #ifdef __KERNEL__
> diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
> index e7226c4..9040038 100644
> --- a/arch/arm64/kernel/fpsimd.c
> +++ b/arch/arm64/kernel/fpsimd.c
> @@ -39,6 +39,7 @@
> #include <linux/slab.h>
> #include <linux/sysctl.h>
>
> +#include <asm/esr.h>
> #include <asm/fpsimd.h>
> #include <asm/cputype.h>
> #include <asm/simd.h>
> @@ -867,18 +868,20 @@ asmlinkage void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs)
> asmlinkage void do_fpsimd_exc(unsigned int esr, struct pt_regs *regs)
> {
> siginfo_t info;
> - unsigned int si_code = FPE_FIXME;
> -
> - if (esr & FPEXC_IOF)
> - si_code = FPE_FLTINV;
> - else if (esr & FPEXC_DZF)
> - si_code = FPE_FLTDIV;
> - else if (esr & FPEXC_OFF)
> - si_code = FPE_FLTOVF;
> - else if (esr & FPEXC_UFF)
> - si_code = FPE_FLTUND;
> - else if (esr & FPEXC_IXF)
> - si_code = FPE_FLTRES;
> + unsigned int si_code = FPE_FLTUNK;
> +
> + if (esr & ESR_ELx_FP_EXC_TFV) {
> + if (esr & FPEXC_IOF)
> + si_code = FPE_FLTINV;
> + else if (esr & FPEXC_DZF)
> + si_code = FPE_FLTDIV;
> + else if (esr & FPEXC_OFF)
> + si_code = FPE_FLTOVF;
> + else if (esr & FPEXC_UFF)
> + si_code = FPE_FLTUND;
> + else if (esr & FPEXC_IXF)
> + si_code = FPE_FLTRES;
> + }
>
> memset(&info, 0, sizeof(info));
> info.si_signo = SIGFPE;
More information about the linux-arm-kernel
mailing list