Nokia N900: refcount_t underflow, use after free

[Tony Lindgren]

* Pavel Machek <pavel at ucw.cz> [180308 14:31]:
> Hi!
> 
> I'm getting this warning... Has anyone seen/debugged that before?
> Unfortunately the backtrace does not seem to be too useful :-(.

Adding Suman to Cc, as it points to arm_iommu_release_mapping().

Regards,

Tony

> [    0.000000] Booting Linux on physical CPU 0x0
> [    0.000000] Linux version 4.16.0-rc3-next-20180302 (pavel at duo) (gcc
> version 4.7.2 (GC
> C)) #70 Fri Mar 2 10:16:00 CET 2018
> [    0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7),
> cr=10c5387d
> [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT
> nonaliasing instruction cac
> ...
> [    1.244140] omap3isp 480bc000.isp: 480bc000.isp supply vdd-csiphy2
> not found, using d
> ummy regulator
> [    1.254089] omap3isp 480bc000.isp: Revision 2.0 found
> [    1.260009] omap-iommu 480bd400.mmu: 480bd400.mmu: version 1.1
> [    1.266693] ------------[ cut here ]------------
> [    1.271606] WARNING: CPU: 0 PID: 1 at lib/refcount.c:187
> refcount_sub_and_test+0x94/0xa8
> [    1.280181] refcount_t: underflow; use-after-free.
> [    1.285247] Modules linked in:
> [    1.288482] CPU: 0 PID: 1 Comm: swapper Not tainted
> 4.16.0-rc3-next-20180302 #70
> [    1.296295] Hardware name: Nokia RX-51 board
> [    1.300811] [<c010d6cc>] (unwind_backtrace) from [<c010b560>]
> (show_stack+0x10/0x14)
> [    1.309020] [<c010b560>] (show_stack) from [<c0127dec>]
> (__warn+0xe8/0x110)
> [    1.316375] [<c0127dec>] (__warn) from [<c0127edc>]
> (warn_slowpath_fmt+0x38/0x48)
> [    1.324310] [<c0127edc>] (warn_slowpath_fmt) from [<c034e630>]
> (refcount_sub_and_test+0x94/0xa8)
> [    1.333557] [<c034e630>] (refcount_sub_and_test) from [<c01109a8>]
> (arm_iommu_release_mapping+0x18/0x2c)
> [    1.343597] [<c01109a8>] (arm_iommu_release_mapping) from
> [<c041752c>] (driver_probe_device+0x24c/0x314)
> [    1.353637] [<c041752c>] (driver_probe_device) from [<c04176a0>]
> (__driver_attach+0xac/0xb0)
> [    1.362548] [<c04176a0>] (__driver_attach) from [<c0415b94>]
> (bus_for_each_dev+0x58/0x7c)
> [    1.371185] [<c0415b94>] (bus_for_each_dev) from [<c0416a14>]
> (bus_add_driver+0xe0/0x1f0)
> [    1.379852] [<c0416a14>] (bus_add_driver) from [<c0417f10>]
> (driver_register+0x78/0xf4)
> [    1.388305] [<c0417f10>] (driver_register) from [<c010257c>]
> (do_one_initcall+0x3c/0x16c)
> [    1.396972] [<c010257c>] (do_one_initcall) from [<c0b00d5c>]
> (kernel_init_freeable+0xf8/0x1c4)
> [    1.406066] [<c0b00d5c>] (kernel_init_freeable) from [<c071640c>]
> (kernel_init+0x8/0x108)
> [    1.414703] [<c071640c>] (kernel_init) from [<c01010e8>]
> (ret_from_fork+0x14/0x2c)
> [    1.422698] Exception stack(0xce049fb0 to 0xce049ff8)
> [    1.428039] 9fa0:                                     00000000
> 00000000 00000000 00000000
> [    1.436676] 9fc0: 00000000 00000000 00000000 00000000 00000000
> 00000000 00000000 00000000
> [    1.445312] 9fe0: 00000000 00000000 00000000 00000000 00000013
> 00000000
> [    1.452270] ---[ end trace dcb3a72772bbfe7a ]---
> [    1.459045] ti-soc-thermal 48002524.bandgap: This OMAP thermal
> sensor is unreliable. You've been warned
> [    1.469055] ti-soc-thermal 48002524.bandgap: Non-trimmed BGAP, Temp
> not accurate
> [    1.476898] ti-soc-thermal 48002524.bandgap: thermal zone device is
> NULL
> [    1.485198] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout
> 60 sec
> [    1.495208] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd
> 
> -- 
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html