[PATCH v2 11/12] clk: stm32mp1: add MCO clocks

[gabriel.fernandez at st.com]

From: Gabriel Fernandez <gabriel.fernandez at st.com>

Two micro-controller clock output (MCO) pins are available:
MCO1 and MCO2.
For each output, it is possible to select a clock source.
The selected clock can be divided thanks to configurable
prescaler.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez at st.com>
---
 drivers/clk/clk-stm32mp1.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/clk/clk-stm32mp1.c b/drivers/clk/clk-stm32mp1.c
index 51e3e76..b3a6ec4 100644
--- a/drivers/clk/clk-stm32mp1.c
+++ b/drivers/clk/clk-stm32mp1.c
@@ -252,6 +252,14 @@
 	"off", "ck_lse", "ck_lsi", "ck_hse_rtc"
 };
 
+static const char * const mco1_src[] = {
+	"ck_hsi", "ck_hse", "ck_csi", "ck_lsi", "ck_lse"
+};
+
+static const char * const mco2_src[] = {
+	"ck_mpu", "ck_axi", "ck_mcu", "pll4_p", "ck_hse", "ck_hsi"
+};
+
 static const struct clk_div_table axi_div_table[] = {
 	{ 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
 	{ 4, 4 }, { 5, 4 }, { 6, 4 }, { 7, 4 },
@@ -1960,6 +1968,18 @@ enum {
 		  _MUX(RCC_BDCR, 16, 2, 0),
 		  _NO_DIV),
 
+	/* MCO clocks */
+	COMPOSITE(CK_MCO1, "ck_mco1", mco1_src, CLK_OPS_PARENT_ENABLE |
+		  CLK_SET_RATE_NO_REPARENT,
+		  _GATE(RCC_MCO1CFGR, 12, 0),
+		  _MUX(RCC_MCO1CFGR, 0, 3, 0),
+		  _DIV(RCC_MCO1CFGR, 4, 4, 0, NULL)),
+
+	COMPOSITE(CK_MCO2, "ck_mco2", mco2_src, CLK_OPS_PARENT_ENABLE |
+		  CLK_SET_RATE_NO_REPARENT,
+		  _GATE(RCC_MCO2CFGR, 12, 0),
+		  _MUX(RCC_MCO2CFGR, 0, 3, 0),
+		  _DIV(RCC_MCO2CFGR, 4, 4, 0, NULL)),
 };
 
 struct stm32_clock_match_data {
-- 
1.9.1