[PATCH] ARM: dts: i.MX25: define SSI FIFO depth

[Lothar Waßmann]

Hi,

On Tue,  6 Mar 2018 22:58:19 +0100 Martin Kaiser wrote:
> According to the i.MX25 reference manuals, each SSI has four FIFOs. All
> of those FIFOs can store up to 15 entries.
> 
> The fsl_ssi driver's internal default for the FIFO depth in 8. Set our
> non-default FIFO depth explicitly in the Device Tree.
> 
> Signed-off-by: Martin Kaiser <martin at kaiser.cx>
> ---
>  arch/arm/boot/dts/imx25.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
> index 9725705..cf70df2 100644
> --- a/arch/arm/boot/dts/imx25.dtsi
> +++ b/arch/arm/boot/dts/imx25.dtsi
> @@ -269,6 +269,7 @@
>  				dmas = <&sdma 24 1 0>,
>  				       <&sdma 25 1 0>;
>  				dma-names = "rx", "tx";
> +				fsl,fifo-depth = <15>;
>  				status = "disabled";
>  			};
>  
> @@ -329,6 +330,7 @@
>  				dmas = <&sdma 28 1 0>,
>  				       <&sdma 29 1 0>;
>  				dma-names = "rx", "tx";
> +				fsl,fifo-depth = <15>;
>  				status = "disabled";
>  			};
>  
You are changing the global .dtsi file. Did you test this change with
all devices that are affected by it?


Lothar Waßmann