[PATCH] clk: imx25: set correct parents for ssi ipg clocks
Fabio Estevam
festevam at gmail.com
Thu Mar 8 07:07:45 PST 2018
Hi Martin,
On Thu, Mar 8, 2018 at 11:08 AM, Martin Kaiser <martin at kaiser.cx> wrote:
> Hi Fabio,
>
> Thus wrote Fabio Estevam (festevam at gmail.com):
>
>> I get audio working from SSI1, but I guess this is due to the fact
>> that the bootloader enables the SSI clock:
>
>> I have the following in U-Boot:
>
>> /* Enable the clocks */
>> DATA 4 0x53f8000c 0x1fffffff
>> DATA 4 0x53f80010 0xffffffff
>> DATA 4 0x53f80014 0xfdfff
>
> I'm using the same initial settings.
>
> Nevertheless, ssi1_ipg_per is disbled after loading the kernel.
>
> Digging into this a bit more, it turned out that without my patch,
> clk_disable_unused() recognizes ssi1_ipg_per as unused and disables it.
>
> If my patch is applied and ssi1_ipg_per is declared as parent of
> ssi1_ipg, clk_disable_unused() will not disable it and fsl_ssi_startup()
> will enable both ssi1_ipg_per and ssi1_ipg before playing sound.
I can get audio to work fine without your patch on a mx25pdk.
In the other i.MX clock drivers we have this same pattern:
clks[IMX6SL_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg",
It is not clear to me what is the real issue this patch is trying to fix.
Thanks
More information about the linux-arm-kernel
mailing list