[PATCH V2 3/5] ARM: dts: stm32: add sdmmc support for stm32h743

[Rob Herring]

On Wed, Feb 28, 2018 at 04:47:22PM +0100, Ludovic Barre wrote:
> From: Ludovic Barre <ludovic.barre at st.com>
> 
> This patch adds sdmmc support for stm32h743.
> 2×SD/SDIO/MMC interfaces (up to 125 MHz)
> 
> Signed-off-by: Ludovic Barre <ludovic.barre at st.com>
> ---
>  arch/arm/boot/dts/stm32h743.dtsi | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
> index bbfcbac..5e85538 100644
> --- a/arch/arm/boot/dts/stm32h743.dtsi
> +++ b/arch/arm/boot/dts/stm32h743.dtsi
> @@ -217,6 +217,19 @@
>  			};
>  		};
>  
> +		sdmmc2: sdmmc at 48022400 {

Like I said in the binding example:

mmc at ...

> +			compatible = "st,stm32h7-sdmmc";
> +			reg = <0x48022400 0x400>;
> +			reg-names = "sdmmc";

Not in the binding definition (And don't add it, -names for a single 
item is pointless).

> +			interrupts = <124>;
> +			clocks = <&rcc SDMMC2_CK>;
> +			resets = <&rcc STM32H7_AHB2_RESET(SDMMC2)>;
> +			cap-sd-highspeed;
> +			cap-mmc-highspeed;
> +			max-frequency = <125000000>;
> +			status = "disabled";
> +		};
> +
>  		mdma1: dma at 52000000 {
>  			compatible = "st,stm32h7-mdma";
>  			reg = <0x52000000 0x1000>;
> @@ -227,6 +240,19 @@
>  			dma-requests = <32>;
>  		};
>  
> +		sdmmc1: sdmmc at 52007000 {
> +			compatible = "st,stm32h7-sdmmc";
> +			reg = <0x52007000 0x1000>;
> +			reg-names = "sdmmc";
> +			interrupts = <49>;
> +			clocks = <&rcc SDMMC1_CK>;
> +			resets = <&rcc STM32H7_AHB3_RESET(SDMMC1)>;
> +			cap-sd-highspeed;
> +			cap-mmc-highspeed;
> +			max-frequency = <125000000>;
> +			status = "disabled";
> +		};
> +
>  		lptimer2: timer at 58002400 {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
> -- 
> 2.7.4
>