[PATCH] mmc: sdhci-of-arasan: Add quirk to avoid erroneous msg

[Phil Edworthy]

Hi Shawn,

On 28 February 2018 01:53, Shawn Lin wrote:
> On 2018/2/27 23:05, Phil Edworthy wrote:
> > On 27 February 2018 14:42, Shawn Lin wrote:
> >> On 2018/2/27 22:31, Phil Edworthy wrote:
> >>> On 27 February 2018 14:28, Shawn Lin wrote:
> >>>> 在 2018/2/27 21:55, Phil Edworthy 写道:
> >>>>> Since the controller does not support the end-of-busy IRQ, don't use
> it.
> >>>>> Otherwise, on older SD cards you will get lots of these messages:
> >>>>> "mmc0: Got data interrupt 0x00000002 even though no data operation
> >>>>> was
> >>>> in progress"
> >>>>>
> >>>>
> >>>> I'm afraid you have to explain which version of arasan's IP suffer
> >>>> from this and what does the "older SD cards" mean?
> >>> Ok, I'll try to find out the IP version...
> >>> For "older SD cards", I can provide a list of a few cards that
> >>> exhibit this problem and others that don't, is that enough info?
> >>
> >> What I meant is could you elaborate more about what kind of cards,
> >> e.g, are them the  legacy SDSC cards or SDHC cards, or maybe they are
> >> only running with defaut speed? or whatever, but not just with a
> >> vague "older" cards. :)
> > Unfortunately, I have one SDHC card that works, one that doesn't. Both
> > cards are running with a 50MHz SD clock. All I know is this:
> 
> Thanks for sharing these, though it looks wired as I never remember I saw
> this problem when extensively tested SD cards on one of arasan controllers
> in 2014.
Not sure what you mean by 'wired'?

Note that this is on a relatively slow device, a dual core Cortex A7 @500MHz.
Maybe that has some effect.

It's also interesting that someone posted the same fix for Xilinx a while
back, I linked to it in the commit msg.

Thanks
Phil


> > SD cards that report unexpected interrupts:
> > 2GB Sandisk Extreme III                     (e624 SD02G 1.89 GiB)
> > 8GB Sandisk (SDHC class 4)              (aaaa SU08G 7.40 GiB)
> > 8GB Sandisk Extreme III (SDHC class 6)    (bb4e SD08G 7.61 GiB)
> >
> > SD cards that work ok:
> > 16GB Samsung (microSDHC U1 class 10)          (0001 00000 14.6 GiB)
> > 16GB Sandisk Ultra (microSDHC U1 class 10)    (aaaa SL16G 14.8 GiB)
> > 32GB Sandisk Ultra (microSDHC U1 class 10)    (aaaa SL32G 29.7 GiB)
> >
> > Thanks
> > Phil
> >
> >>>>> This has been reported on Xilinx devices that also use the Arasan IP.
> >>>>> See https://patchwork.kernel.org/patch/8062871/
> >>>>>
> >>>>> This has been tested on the Renesas RZ/ND-DB board with the RZ/N1
> >> SoC.
> >>>>>
> >>>>> Signed-off-by: Phil Edworthy <phil.edworthy at renesas.com>
> >>>>> ---
> >>>>>     drivers/mmc/host/sdhci-of-arasan.c | 3 ++-
> >>>>>     1 file changed, 2 insertions(+), 1 deletion(-)
> >>>>>
> >>>>> diff --git a/drivers/mmc/host/sdhci-of-arasan.c
> >>>>> b/drivers/mmc/host/sdhci-of-arasan.c
> >>>>> index c33a5f7..ab66e32 100644
> >>>>> --- a/drivers/mmc/host/sdhci-of-arasan.c
> >>>>> +++ b/drivers/mmc/host/sdhci-of-arasan.c
> >>>>> @@ -290,7 +290,8 @@ static const struct sdhci_pltfm_data
> >>>> sdhci_arasan_pdata = {
> >>>>>     	.ops = &sdhci_arasan_ops,
> >>>>>     	.quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
> >>>>>     	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
> >>>>> -			SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN,
> >>>>> +			SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN
> |
> >>>>> +			SDHCI_QUIRK2_STOP_WITH_TC,
> >>>>>     };
> >>>>>
> >>>>>     static u32 sdhci_arasan_cqhci_irq(struct sdhci_host *host, u32
> >>>>> intmask)
> >>>>>
> >>>>
> >>>>
> >>>> --
> >>>> Best Regards
> >>>> Shawn Lin
> >>>
> >>>
> >>>
> >>>
> >>
> >>
> >> --
> >> Best Regards
> >> Shawn Lin
> >
> >
> >
> >