[PATCH v2 00/11] perf events patches for improved ARM64 support

[John Garry]

>> I am seeing issue(log below) with this patchset on our platfrom.
>> i have tried using your v2 branch [1]
>>
>> root at borg-1>perf_acme>> ./perf --version
>> perf version 4.16.rc1.g087f7ca
>> root at borg-1>perf_acme>> ./perf stat -e bus_access_rd sleep 1
>>
>>  Performance counter stats for 'sleep 1':
>>
>>             23,099      bus_access_rd
>>
>>        1.000708516 seconds time elapsed
>>
>> root at borg-1>perf_acme>> cd -
>> /ganapat/perf/linux-hisi/tools/perf
>> root at borg-1>perf>> ./perf --version
>> perf version 4.16.rc1.gcb5a74
>> root at borg-1>perf>> ./perf stat -e bus_access_rd sleep 1
>>
>>  Performance counter stats for 'sleep 1':
>>
>>                  0      bus_access_rd
>>
>>        1.000709162 seconds time elapsed
>>
>> root at borg-1>perf>>
>>
>>
>> [1] https://github.com/hisilicon/linux-hisi.git
>>
> Hi,

Hi Will Cohen, Ganapatrao,

>
> I took a slightly different tack and compared the output of "perf list --details" to see if the event numbers numbers were the same.  For the common events borrowed from the armv8-recommended.json all the events are 0 for the cortex a53.  That would explain why the bus_access_rd above were counts were different if it was counting the SW_INCR event instead of bus_access_rd.
>

Thanks for this. I see the problem. At the end I missed bringing across 
something from v1. Easily fixed.

> Why not key the matching of common events off the "EventName" rather than "EventCode"? The EventName would be more descriptive. Then the json files could eliminate the "BriefDescription" and just have the EventName with nothing else for each event.  This would further reduce the amount of redundant fields between the specific implementations and the common set.
>

I did consider it and it could work. But it all depends on whether the 
"EventName" only is always readable/descriptive enough in the JSON, 
without requiring the "BriefDescription". The "EventName" can be rather 
succinct for any arch. And we need to guarantee that the "EventName" is 
unique.

Here's a sample:
[
     {
         "ArchStdEvent": "L1D_CACHE_RD",
     },
     {
         "ArchStdEvent": "L1D_CACHE_WR",
     },

vs.

[
     {
         "ArchStdEvent": "0x40",
         "BriefDescription": "L1D cache access, read"
     },
     {
         "ArchStdEvent": "0x41",
         "BriefDescription": "L1D cache access, write"
     },


Opinion?

John

> -Will
>
> .
>

thanks,
John