[PATCH 2/2] ARM: dts: armada388-clearfog: add SFP module support
Baruch Siach
baruch at tkos.co.il
Sun Mar 4 04:13:24 PST 2018
Hi Russell,
On Tue, Feb 27, 2018 at 04:02:02PM +0000, Russell King wrote:
> Add SFP module support for Clearfog using the SFP phylink support.
>
> Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
Tested-by: Baruch Siach <baruch at tkos.co.il>
Tested on Clearfog base with kernel version 4.16-rc3. The SFP module is 1G
copper Linktel LX1801CNR.
ethtool output:
Identifier : 0x03 (SFP)
Extended identifier : 0x04 (GBIC/SFP defined by 2-wire interface ID)
Connector : 0x00 (unknown or unspecified)
Transceiver codes : 0x00 0x00 0x00 0x08 0x00 0x00 0x00 0x00
Transceiver type : Ethernet: 1000BASE-T
Encoding : 0x01 (8B/10B)
BR, Nominal : 1300MBd
Rate identifier : 0x00 (unspecified)
Length (SMF,km) : 0km
Length (SMF) : 0m
Length (50um) : 0m
Length (62.5um) : 0m
Length (Copper) : 100m
Length (OM3) : 0m
Laser wavelength : 0nm
Vendor name : LINKTEL
Vendor OUI : 00:00:00
Vendor PN : LX1801CNR
Vendor rev : 1.0
Option values : 0x00 0x10
Option : TX_DISABLE implemented
BR margin, max : 0%
BR margin, min : 0%
Vendor SN : 1172623927
Date code : 170628
Thanks,
baruch
--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -
More information about the linux-arm-kernel
mailing list