[PATCH 1/3] ARM: multi_v7_defconfig: Enable OTG and MUSB as loadable modules

[Tony Lindgren]

We can support USB OTG with MUSB driver on many ARM SoCs. Let's
enable all the SoCs with MUSB as loadable modules. And let's enable
their related DMA hardware.

And as MUSB is an USB OTG controller, let's enable OTG support too.

Signed-off-by: Tony Lindgren <tony at atomide.com>
---
 arch/arm/configs/multi_v7_defconfig | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -683,6 +683,7 @@ CONFIG_SND_SOC_STI=m
 CONFIG_SND_SOC_STI_SAS=m
 CONFIG_SND_SIMPLE_CARD=m
 CONFIG_USB=y
+CONFIG_USB_OTG=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_MVEBU=y
 CONFIG_USB_XHCI_RCAR=m
@@ -704,6 +705,15 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_UAS=m
 CONFIG_USB_MUSB_HDRC=m
 CONFIG_USB_MUSB_SUNXI=m
+CONFIG_USB_MUSB_TUSB6010=m
+CONFIG_USB_MUSB_OMAP2PLUS=m
+CONFIG_USB_MUSB_AM35X=m
+CONFIG_USB_MUSB_DSPS=m
+CONFIG_USB_MUSB_UX500=m
+CONFIG_USB_UX500_DMA=y
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_USB_TI_CPPI41_DMA=y
+CONFIG_USB_TUSB_OMAP_DMA=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC2=y
 CONFIG_USB_HSIC_USB3503=y
-- 
2.16.2