[PATCH] ARM: dts: tpc: Device tree description of the TPC board

[Sascha Hauer]

Hi Lukasz,

On Fri, Mar 02, 2018 at 01:17:50PM +0100, Lukasz Majewski wrote:
> This commit adds device tree description of K+P's TPC board.

Can we get a hint what this board is? I assume this one:

Technologic Systems' Full i.MX6 Portfolio Including SBC, COM, and Touch
Panel PCs

Anyway, future developers are thankful if they have the information
around when they have to work on that file or have to decide if it is to
be removed.

> 
> Signed-off-by: Lukasz Majewski <lukma at denx.de>
> ---
>  arch/arm/boot/dts/Makefile         |   1 +
>  arch/arm/boot/dts/imx6q-kp-tpc.dts |  84 +++++++
>  arch/arm/boot/dts/imx6q-kp.dtsi    | 468 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 553 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6q-kp-tpc.dts
>  create mode 100644 arch/arm/boot/dts/imx6q-kp.dtsi
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index ade7a38543dc..c148c4cf28f2 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -459,6 +459,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
>  	imx6q-icore-ofcap10.dtb \
>  	imx6q-icore-ofcap12.dtb \
>  	imx6q-icore-rqs.dtb \
> +	imx6q-kp-tpc.dtb \
>  	imx6q-marsboard.dtb \
>  	imx6q-mccmon6.dtb \
>  	imx6q-nitrogen6x.dtb \
> diff --git a/arch/arm/boot/dts/imx6q-kp-tpc.dts b/arch/arm/boot/dts/imx6q-kp-tpc.dts
> new file mode 100644
> index 000000000000..955462e778c9
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6q-kp-tpc.dts
> +/dts-v1/;
> +
> +#include "imx6q-kp.dtsi"
> +
> +/ {
> +	model = "Freescale i.MX6 Quad K+P TPC Board";
> +	compatible = "fsl,imx6q-tpc", "fsl,imx6q";

If it is what I think it is the vendor is not fsl.

> +};
> +
> +&lcd_display {
> +	display-timings {
> +		800x480x60 {
> +			clock-frequency = <34209000>;
> +			hactive = <800>;
> +			vactive = <480>;
> +			hback-porch = <85>;
> +			hfront-porch = <15>;
> +			vback-porch = <34>;
> +			vfront-porch = <10>;
> +			hsync-len = <28>;
> +			vsync-len = <1>;
> +			hsync-active = <1>;
> +			vsync-active = <1>;
> +			de-active = <1>;
> +		};
> +	};
> +};
> +
> +&ipu1_di0_disp0 {
> +	remote-endpoint = <&lcd_display_in>;
> +};
> +
> +&can1 {
> +	status = "disabled";
> +};
> +
> +&can2 {
> +	status = "disabled";
> +};

These are not enabled in your base dtsi, so no need to disabled it here.

> +
> +&uart1 {
> +	status = "okay";
> +};

This is already enabled in your base dtsi.

> +
> +&uart2 {
> +	status = "disabled";
> +};

This is still disabled, no need to enable.

> diff --git a/arch/arm/boot/dts/imx6q-kp.dtsi b/arch/arm/boot/dts/imx6q-kp.dtsi
> new file mode 100644
> index 000000000000..47a10fb1d46b
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6q-kp.dtsi
> +
> +	memory: memory {
> +		reg = <0x10000000 0x40000000>;
> +	};
> +
> +	pwm-buzzer {
> +		compatible = "pwm-backlight";

What is it? A backlight or a buzzer?

> +		pwms = <&pwm2 0 500000>; //2kHz
> +		brightness-levels = <
> +			0   7  8  9
> +			10 11 12 13 14 15 16 17 18 19
> +			20 21 22 23 24 25 26 27 28 29
> +			30 31 32 33 34 35 36 37 38 39
> +			40 41 42 43 44 45 46 47 48 49
> +			50 51 52 53 54 55 56 57 58 59
> +			60 61 62 63 64 65 66 67 68 69
> +			70 71 72 73 74 75 76 77 78 79
> +			80 81 82 83 84 85 86 87 88 89
> +			90 91 92 93 94 95 96 97 98 99
> +			100
> +			>;
> +		default-brightness-level = <0>;
> +	};
> +
> +	regulators {

AFAIK regulators shall no longer be in a separate subnode.

> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		reg_usb_h1_vbus: regulator at 1 {
> +			compatible = "regulator-fixed";
> +			reg = <1>;

drop the reg property and also the @1 in the name.

> +			regulator-name = "usb_h1_vbus";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			enable-active-high;
> +		};
> +
> +		reg_audio: regulator at 2 {
> +			compatible = "regulator-fixed";
> +			reg = <2>;

ditto

> +			regulator-name = "sgtl5000-supply";
> +			gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
> +			enable-active-high;
> +			regulator-always-on;
> +		};
> +
> +		reg_3p3v: regulator at 3 {
> +			compatible = "regulator-fixed";
> +			reg = <4>;

ditto.

(You have to change the node names of course to make them unique again)


Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |