[PATCH v5 08/23] KVM: arm/arm64: Move ioremap calls to create_hyp_io_mappings
Marc Zyngier
marc.zyngier at arm.com
Thu Mar 1 07:55:23 PST 2018
Both HYP io mappings call ioremap, followed by create_hyp_io_mappings.
Let's move the ioremap call into create_hyp_io_mappings itself, which
simplifies the code a bit and allows for further refactoring.
Reviewed-by: Christoffer Dall <christoffer.dall at linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
---
arch/arm/include/asm/kvm_mmu.h | 3 ++-
arch/arm64/include/asm/kvm_mmu.h | 3 ++-
virt/kvm/arm/mmu.c | 24 ++++++++++++++----------
virt/kvm/arm/vgic/vgic-v2.c | 31 ++++++++-----------------------
4 files changed, 26 insertions(+), 35 deletions(-)
diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h
index a6808d2869f5..477c5ed426ef 100644
--- a/arch/arm/include/asm/kvm_mmu.h
+++ b/arch/arm/include/asm/kvm_mmu.h
@@ -50,7 +50,8 @@
#include <asm/stage2_pgtable.h>
int create_hyp_mappings(void *from, void *to, pgprot_t prot);
-int create_hyp_io_mappings(void *from, void *to, phys_addr_t);
+int create_hyp_io_mappings(phys_addr_t phys_addr, size_t size,
+ void __iomem **kaddr);
void free_hyp_pgds(void);
void stage2_unmap_vm(struct kvm *kvm);
diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h
index 7120bf3f22c7..5885564f9863 100644
--- a/arch/arm64/include/asm/kvm_mmu.h
+++ b/arch/arm64/include/asm/kvm_mmu.h
@@ -140,7 +140,8 @@ static inline unsigned long __kern_hyp_va(unsigned long v)
#include <asm/stage2_pgtable.h>
int create_hyp_mappings(void *from, void *to, pgprot_t prot);
-int create_hyp_io_mappings(void *from, void *to, phys_addr_t);
+int create_hyp_io_mappings(phys_addr_t phys_addr, size_t size,
+ void __iomem **kaddr);
void free_hyp_pgds(void);
void stage2_unmap_vm(struct kvm *kvm);
diff --git a/virt/kvm/arm/mmu.c b/virt/kvm/arm/mmu.c
index 711473cd1097..d58388d8550e 100644
--- a/virt/kvm/arm/mmu.c
+++ b/virt/kvm/arm/mmu.c
@@ -709,26 +709,30 @@ int create_hyp_mappings(void *from, void *to, pgprot_t prot)
}
/**
- * create_hyp_io_mappings - duplicate a kernel IO mapping into Hyp mode
- * @from: The kernel start VA of the range
- * @to: The kernel end VA of the range (exclusive)
+ * create_hyp_io_mappings - Map IO into both kernel and HYP
* @phys_addr: The physical start address which gets mapped
+ * @size: Size of the region being mapped
+ * @kaddr: Kernel VA for this mapping
*
* The resulting HYP VA is the same as the kernel VA, modulo
* HYP_PAGE_OFFSET.
*/
-int create_hyp_io_mappings(void *from, void *to, phys_addr_t phys_addr)
+int create_hyp_io_mappings(phys_addr_t phys_addr, size_t size,
+ void __iomem **kaddr)
{
- unsigned long start = kern_hyp_va((unsigned long)from);
- unsigned long end = kern_hyp_va((unsigned long)to);
+ unsigned long start, end;
- if (is_kernel_in_hyp_mode())
+ *kaddr = ioremap(phys_addr, size);
+ if (!*kaddr)
+ return -ENOMEM;
+
+ if (is_kernel_in_hyp_mode()) {
return 0;
+ }
- /* Check for a valid kernel IO mapping */
- if (!is_vmalloc_addr(from) || !is_vmalloc_addr(to - 1))
- return -EINVAL;
+ start = kern_hyp_va((unsigned long)*kaddr);
+ end = kern_hyp_va((unsigned long)*kaddr + size);
return __create_hyp_mappings(hyp_pgd, PTRS_PER_PGD, start, end,
__phys_to_pfn(phys_addr), PAGE_HYP_DEVICE);
}
diff --git a/virt/kvm/arm/vgic/vgic-v2.c b/virt/kvm/arm/vgic/vgic-v2.c
index c32d7b93ffd1..21f963f9780e 100644
--- a/virt/kvm/arm/vgic/vgic-v2.c
+++ b/virt/kvm/arm/vgic/vgic-v2.c
@@ -361,16 +361,10 @@ int vgic_v2_probe(const struct gic_kvm_info *info)
if (!PAGE_ALIGNED(info->vcpu.start) ||
!PAGE_ALIGNED(resource_size(&info->vcpu))) {
kvm_info("GICV region size/alignment is unsafe, using trapping (reduced performance)\n");
- kvm_vgic_global_state.vcpu_base_va = ioremap(info->vcpu.start,
- resource_size(&info->vcpu));
- if (!kvm_vgic_global_state.vcpu_base_va) {
- kvm_err("Cannot ioremap GICV\n");
- return -ENOMEM;
- }
- ret = create_hyp_io_mappings(kvm_vgic_global_state.vcpu_base_va,
- kvm_vgic_global_state.vcpu_base_va + resource_size(&info->vcpu),
- info->vcpu.start);
+ ret = create_hyp_io_mappings(info->vcpu.start,
+ resource_size(&info->vcpu),
+ &kvm_vgic_global_state.vcpu_base_va);
if (ret) {
kvm_err("Cannot map GICV into hyp\n");
goto out;
@@ -379,26 +373,17 @@ int vgic_v2_probe(const struct gic_kvm_info *info)
static_branch_enable(&vgic_v2_cpuif_trap);
}
- kvm_vgic_global_state.vctrl_base = ioremap(info->vctrl.start,
- resource_size(&info->vctrl));
- if (!kvm_vgic_global_state.vctrl_base) {
- kvm_err("Cannot ioremap GICH\n");
- ret = -ENOMEM;
+ ret = create_hyp_io_mappings(info->vctrl.start,
+ resource_size(&info->vctrl),
+ &kvm_vgic_global_state.vctrl_base);
+ if (ret) {
+ kvm_err("Cannot map VCTRL into hyp\n");
goto out;
}
vtr = readl_relaxed(kvm_vgic_global_state.vctrl_base + GICH_VTR);
kvm_vgic_global_state.nr_lr = (vtr & 0x3f) + 1;
- ret = create_hyp_io_mappings(kvm_vgic_global_state.vctrl_base,
- kvm_vgic_global_state.vctrl_base +
- resource_size(&info->vctrl),
- info->vctrl.start);
- if (ret) {
- kvm_err("Cannot map VCTRL into hyp\n");
- goto out;
- }
-
ret = kvm_register_vgic_device(KVM_DEV_TYPE_ARM_VGIC_V2);
if (ret) {
kvm_err("Cannot register GICv2 KVM device\n");
--
2.14.2
More information about the linux-arm-kernel
mailing list