[PATCH v9 7/9] KVM: arm/arm64: Provide a get_input_level for the arch timer

[Christoffer Dall]

Hi Tomasz,

On Mon, Jan 22, 2018 at 01:32:57PM +0100, Tomasz Nowicki wrote:
> On 20.12.2017 12:36, Christoffer Dall wrote:
> >The VGIC can now support the life-cycle of mapped level-triggered
> >interrupts, and we no longer have to read back the timer state on every
> >exit from the VM if we had an asserted timer interrupt signal, because
> >the VGIC already knows if we hit the unlikely case where the guest
> >disables the timer without ACKing the virtual timer interrupt.
> >
> >This means we rework a bit of the code to factor out the functionality
> >to snapshot the timer state from vtimer_save_state(), and we can reuse
> >this functionality in the sync path when we have an irqchip in
> >userspace, and also to support our implementation of the
> >get_input_level() function for the timer.
> >
> >This change also means that we can no longer rely on the timer's view of
> >the interrupt line to set the active state, because we no longer
> >maintain this state for mapped interrupts when exiting from the guest.
> >Instead, we only set the active state if the virtual interrupt is
> >active, and otherwise we simply let the timer fire again and raise the
> >virtual interrupt from the ISR.
> >
> >Reviewed-by: Eric Auger <eric.auger at redhat.com>
> >Reviewed-by: Marc Zyngier <marc.zyngier at arm.com>
> >Signed-off-by: Christoffer Dall <christoffer.dall at linaro.org>
> >---
> >  include/kvm/arm_arch_timer.h |  2 ++
> >  virt/kvm/arm/arch_timer.c    | 84 ++++++++++++++++++++------------------------
> >  2 files changed, 40 insertions(+), 46 deletions(-)
> >
> >diff --git a/include/kvm/arm_arch_timer.h b/include/kvm/arm_arch_timer.h
> >index 6e45608b2399..b1dcfde0a3ef 100644
> >--- a/include/kvm/arm_arch_timer.h
> >+++ b/include/kvm/arm_arch_timer.h
> >@@ -90,6 +90,8 @@ void kvm_timer_vcpu_put(struct kvm_vcpu *vcpu);
> >  void kvm_timer_init_vhe(void);
> >+bool kvm_arch_timer_get_input_level(int vintid);
> >+
> >  #define vcpu_vtimer(v)	(&(v)->arch.timer_cpu.vtimer)
> >  #define vcpu_ptimer(v)	(&(v)->arch.timer_cpu.ptimer)
> >diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c
> >index fb0533ed903d..d845d67b7062 100644
> >--- a/virt/kvm/arm/arch_timer.c
> >+++ b/virt/kvm/arm/arch_timer.c
> >@@ -343,6 +343,12 @@ static void kvm_timer_update_state(struct kvm_vcpu *vcpu)
> >  	phys_timer_emulate(vcpu);
> >  }
> >+static void __timer_snapshot_state(struct arch_timer_context *timer)
> >+{
> >+	timer->cnt_ctl = read_sysreg_el0(cntv_ctl);
> >+	timer->cnt_cval = read_sysreg_el0(cntv_cval);
> >+}
> >+
> >  static void vtimer_save_state(struct kvm_vcpu *vcpu)
> >  {
> >  	struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
> >@@ -354,10 +360,8 @@ static void vtimer_save_state(struct kvm_vcpu *vcpu)
> >  	if (!vtimer->loaded)
> >  		goto out;
> >-	if (timer->enabled) {
> >-		vtimer->cnt_ctl = read_sysreg_el0(cntv_ctl);
> >-		vtimer->cnt_cval = read_sysreg_el0(cntv_cval);
> >-	}
> >+	if (timer->enabled)
> >+		__timer_snapshot_state(vtimer);
> >  	/* Disable the virtual timer */
> >  	write_sysreg_el0(0, cntv_ctl);
> >@@ -454,8 +458,7 @@ static void kvm_timer_vcpu_load_vgic(struct kvm_vcpu *vcpu)
> >  	bool phys_active;
> >  	int ret;
> >-	phys_active = vtimer->irq.level ||
> >-		      kvm_vgic_map_is_active(vcpu, vtimer->irq.irq);
> >+	phys_active = kvm_vgic_map_is_active(vcpu, vtimer->irq.irq);
> >  	ret = irq_set_irqchip_state(host_vtimer_irq,
> >  				    IRQCHIP_STATE_ACTIVE,
> >@@ -535,54 +538,27 @@ void kvm_timer_vcpu_put(struct kvm_vcpu *vcpu)
> >  	set_cntvoff(0);
> >  }
> >-static void unmask_vtimer_irq(struct kvm_vcpu *vcpu)
> >+/*
> >+ * With a userspace irqchip we have to check if the guest de-asserted the
> >+ * timer and if so, unmask the timer irq signal on the host interrupt
> >+ * controller to ensure that we see future timer signals.
> >+ */
> >+static void unmask_vtimer_irq_user(struct kvm_vcpu *vcpu)
> >  {
> >  	struct arch_timer_context *vtimer = vcpu_vtimer(vcpu);
> >  	if (unlikely(!irqchip_in_kernel(vcpu->kvm))) {
> >-		kvm_vtimer_update_mask_user(vcpu);
> >-		return;
> >-	}
> >-
> >-	/*
> >-	 * If the guest disabled the timer without acking the interrupt, then
> >-	 * we must make sure the physical and virtual active states are in
> >-	 * sync by deactivating the physical interrupt, because otherwise we
> >-	 * wouldn't see the next timer interrupt in the host.
> >-	 */
> >-	if (!kvm_vgic_map_is_active(vcpu, vtimer->irq.irq)) {
> >-		int ret;
> >-		ret = irq_set_irqchip_state(host_vtimer_irq,
> >-					    IRQCHIP_STATE_ACTIVE,
> >-					    false);
> >-		WARN_ON(ret);
> >+		__timer_snapshot_state(vtimer);
> >+		if (!kvm_timer_should_fire(vtimer)) {
> >+			kvm_timer_update_irq(vcpu, false, vtimer);
> >+			kvm_vtimer_update_mask_user(vcpu);
> >+		}
> >  	}
> >  }
> >-/**
> >- * kvm_timer_sync_hwstate - sync timer state from cpu
> >- * @vcpu: The vcpu pointer
> >- *
> >- * Check if any of the timers have expired while we were running in the guest,
> >- * and inject an interrupt if that was the case.
> >- */
> >  void kvm_timer_sync_hwstate(struct kvm_vcpu *vcpu)
> >  {
> >-	struct arch_timer_context *vtimer = vcpu_vtimer(vcpu);
> >-
> >-	/*
> >-	 * If we entered the guest with the vtimer output asserted we have to
> >-	 * check if the guest has modified the timer so that we should lower
> >-	 * the line at this point.
> >-	 */
> >-	if (vtimer->irq.level) {
> >-		vtimer->cnt_ctl = read_sysreg_el0(cntv_ctl);
> >-		vtimer->cnt_cval = read_sysreg_el0(cntv_cval);
> >-		if (!kvm_timer_should_fire(vtimer)) {
> >-			kvm_timer_update_irq(vcpu, false, vtimer);
> >-			unmask_vtimer_irq(vcpu);
> >-		}
> >-	}
> >+	unmask_vtimer_irq_user(vcpu);
> >  }
> 
> While testing your VHE optimization series [1] I noticed massive WFI exits
> on ThunderX2 so I bisected 'vhe-optimize-v3-with-fixes' branch of [2] down
> to this commit.
> 
> The host traps on WFI so that VCPU thread should be scheduled out for some
> time. However, this is not happening because kvm_vcpu_block() ->
> kvm_vcpu_check_block() gives negative value (vtimer->irq.level is asserted)
> and VCPU is woken up immediately. Nobody takes care about lowering the
> vtimer line in this case.
> 
> I reverted shape of above kvm_timer_sync_hwstate() and things are good now.
> Before I start digging I wanted to check with you. Can you please check on
> your side?
> 

This patch should fix the issue, thanks for pointing it out.
https://lists.cs.columbia.edu/pipermail/kvmarm/2018-January/029582.html

I'd be happy to hear if you can confirm this or not.

I forgot that my git auto-cc doesn't pick up reported-by tags (I should
fix that), so apologies for not cc'ing you on the series.

Thanks,
-Christoffer