[PATCH 2/5] drm: add ARM flush implementation
Daniel Vetter
daniel at ffwll.ch
Tue Jan 30 02:14:36 PST 2018
On Tue, Jan 23, 2018 at 06:56:03PM -0800, Gurchetan Singh wrote:
> The dma_cache_maint_page function is important for cache maintenance on
> ARM32 (this was determined via testing).
>
> Since we desire direct control of the caches in drm_cache.c, let's make
> a copy of the function, rename it and use it.
>
> v2: Don't use DMA API, call functions directly (Daniel)
>
> Signed-off-by: Gurchetan Singh <gurchetansingh at chromium.org>
fwiw, in principle, this approach has my Ack from the drm side.
But if we can't get any agreement from the arch side then I guess we'll
just have to suck it up and mandate that any dma-buf on ARM32 must be wc
mapped, always. Not sure that's a good idea either, but should at least
get things moving.
-Daniel
> ---
> drivers/gpu/drm/drm_cache.c | 61 +++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 61 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_cache.c b/drivers/gpu/drm/drm_cache.c
> index 89cdd32fe1f3..5124582451c6 100644
> --- a/drivers/gpu/drm/drm_cache.c
> +++ b/drivers/gpu/drm/drm_cache.c
> @@ -69,6 +69,55 @@ static void drm_cache_flush_clflush(struct page *pages[],
> }
> #endif
>
> +#if defined(CONFIG_ARM)
> +static void drm_cache_maint_page(struct page *page, unsigned long offset,
> + size_t size, enum dma_data_direction dir,
> + void (*op)(const void *, size_t, int))
> +{
> + unsigned long pfn;
> + size_t left = size;
> +
> + pfn = page_to_pfn(page) + offset / PAGE_SIZE;
> + offset %= PAGE_SIZE;
> +
> + /*
> + * A single sg entry may refer to multiple physically contiguous
> + * pages. But we still need to process highmem pages individually.
> + * If highmem is not configured then the bulk of this loop gets
> + * optimized out.
> + */
> + do {
> + size_t len = left;
> + void *vaddr;
> +
> + page = pfn_to_page(pfn);
> +
> + if (PageHighMem(page)) {
> + if (len + offset > PAGE_SIZE)
> + len = PAGE_SIZE - offset;
> +
> + if (cache_is_vipt_nonaliasing()) {
> + vaddr = kmap_atomic(page);
> + op(vaddr + offset, len, dir);
> + kunmap_atomic(vaddr);
> + } else {
> + vaddr = kmap_high_get(page);
> + if (vaddr) {
> + op(vaddr + offset, len, dir);
> + kunmap_high(page);
> + }
> + }
> + } else {
> + vaddr = page_address(page) + offset;
> + op(vaddr, len, dir);
> + }
> + offset = 0;
> + pfn++;
> + left -= len;
> + } while (left);
> +}
> +#endif
> +
> /**
> * drm_flush_pages - Flush dcache lines of a set of pages.
> * @pages: List of pages to be flushed.
> @@ -104,6 +153,12 @@ drm_flush_pages(struct page *pages[], unsigned long num_pages)
> (unsigned long)page_virtual + PAGE_SIZE);
> kunmap_atomic(page_virtual);
> }
> +#elif defined(CONFIG_ARM)
> + unsigned long i;
> +
> + for (i = 0; i < num_pages; i++)
> + drm_cache_maint_page(pages[i], 0, PAGE_SIZE, DMA_TO_DEVICE,
> + dmac_map_area);
> #else
> pr_err("Architecture has no drm_cache.c support\n");
> WARN_ON_ONCE(1);
> @@ -135,6 +190,12 @@ drm_flush_sg(struct sg_table *st)
>
> if (wbinvd_on_all_cpus())
> pr_err("Timed out waiting for cache flush\n");
> +#elif defined(CONFIG_ARM)
> + struct sg_page_iter sg_iter;
> +
> + for_each_sg_page(st->sgl, &sg_iter, st->nents, 0)
> + drm_cache_maint_page(sg_page_iter_page(&sg_iter), 0, PAGE_SIZE,
> + DMA_TO_DEVICE, dmac_map_area);
> #else
> pr_err("Architecture has no drm_cache.c support\n");
> WARN_ON_ONCE(1);
> --
> 2.13.5
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the linux-arm-kernel
mailing list