[PATCH v2 13/16] arm: dts: sun8i: h3: add thermal zone to H3

[Philipp Rossak]

On 29.01.2018 10:50, Maxime Ripard wrote:
> On Mon, Jan 29, 2018 at 12:29:16AM +0100, Philipp Rossak wrote:
>> This patch adds the thermal zones to the H3. We have only one sensor and
>> that is placed in the cpu.
>>
>> Signed-off-by: Philipp Rossak <embed3d at gmail.com>
>> ---
>>   arch/arm/boot/dts/sun8i-h3.dtsi | 9 +++++++++
>>   1 file changed, 9 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
>> index fbb007e5798e..3f83f6a27c74 100644
>> --- a/arch/arm/boot/dts/sun8i-h3.dtsi
>> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
>> @@ -72,6 +72,15 @@
>>   		};
>>   	};
>>   
>> +	thermal-zones {
>> +		cpu-thermal {
>> +			/* milliseconds */
>> +			polling-delay-passive = <250>;
>> +			polling-delay = <1000>;
>> +			thermal-sensors = <&ths 0>;
> 
> if the thermal-sensor-cells value is indeed 0, the phandle parsing
> will be broken here.
> 
> Maxime
> 

Ok, then I will remove the 0.

Thanks,

Philipp