[PATCH v2 06/16] iio: adc: sun4i-gpadc-iio: rework: support multiple sensors
Maxime Ripard
maxime.ripard at free-electrons.com
Mon Jan 29 01:37:38 PST 2018
Hi,
On Mon, Jan 29, 2018 at 12:29:09AM +0100, Philipp Rossak wrote:
> For adding newer sensor some basic rework of the code is necessary.
>
> This patch reworks the driver to be able to handle more than one
> thermal sensor. Newer SoC like the A80 have 4 thermal sensors.
> Because of this the maximal sensor count value was set to 4.
>
> The sensor_id value is set during sensor registration and is for each
> registered sensor indiviual. This makes it able to differntiate the
> sensors when the value is read from the register.
>
> In function sun4i_gpadc_read_raw(), the sensor number of the ths sensor
> was directly set to 0 (sun4i_gpadc_temp_read(x,x,0)). This selects
> in the temp_read function automatically sensor 0. A check for the
> sensor_id is here not required since the old sensors only have one
> thermal sensor. In addition to that is the sun4i_gpadc_read_raw()
> function only used by the "older" sensors (before A33) where the
> thermal sensor was a cobination of an adc and a thermal sensor.
>
> Signed-off-by: Philipp Rossak <embed3d at gmail.com>
> ---
> drivers/iio/adc/sun4i-gpadc-iio.c | 36 +++++++++++++++++++++++-------------
> include/linux/mfd/sun4i-gpadc.h | 3 +++
> 2 files changed, 26 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
> index 51ec0104d678..ac9ad2f8232f 100644
> --- a/drivers/iio/adc/sun4i-gpadc-iio.c
> +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
> @@ -67,12 +67,13 @@ struct gpadc_data {
> unsigned int tp_adc_select;
> unsigned int (*adc_chan_select)(unsigned int chan);
> unsigned int adc_chan_mask;
> - unsigned int temp_data;
> + unsigned int temp_data[MAX_SENSOR_COUNT];
> int (*sample_start)(struct sun4i_gpadc_iio *info);
> int (*sample_end)(struct sun4i_gpadc_iio *info);
> bool has_bus_clk;
> bool has_bus_rst;
> bool has_mod_clk;
> + int sensor_count;
> };
>
> static const struct gpadc_data sun4i_gpadc_data = {
> @@ -82,9 +83,10 @@ static const struct gpadc_data sun4i_gpadc_data = {
> .tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
> .adc_chan_select = &sun4i_gpadc_chan_select,
> .adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
> - .temp_data = SUN4I_GPADC_TEMP_DATA,
> + .temp_data = {SUN4I_GPADC_TEMP_DATA, 0, 0, 0},
> .sample_start = sun4i_gpadc_sample_start,
> .sample_end = sun4i_gpadc_sample_end,
> + .sensor_count = 1,
> };
>
> static const struct gpadc_data sun5i_gpadc_data = {
> @@ -94,9 +96,10 @@ static const struct gpadc_data sun5i_gpadc_data = {
> .tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
> .adc_chan_select = &sun4i_gpadc_chan_select,
> .adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
> - .temp_data = SUN4I_GPADC_TEMP_DATA,
> + .temp_data = {SUN4I_GPADC_TEMP_DATA, 0, 0, 0},
> .sample_start = sun4i_gpadc_sample_start,
> .sample_end = sun4i_gpadc_sample_end,
> + .sensor_count = 1,
> };
>
> static const struct gpadc_data sun6i_gpadc_data = {
> @@ -106,18 +109,20 @@ static const struct gpadc_data sun6i_gpadc_data = {
> .tp_adc_select = SUN6I_GPADC_CTRL1_TP_ADC_SELECT,
> .adc_chan_select = &sun6i_gpadc_chan_select,
> .adc_chan_mask = SUN6I_GPADC_CTRL1_ADC_CHAN_MASK,
> - .temp_data = SUN4I_GPADC_TEMP_DATA,
> + .temp_data = {SUN4I_GPADC_TEMP_DATA, 0, 0, 0},
> .sample_start = sun4i_gpadc_sample_start,
> .sample_end = sun4i_gpadc_sample_end,
> + .sensor_count = 1,
> };
>
> static const struct gpadc_data sun8i_a33_gpadc_data = {
> .temp_offset = -1662,
> .temp_scale = 162,
> .tp_mode_en = SUN8I_A33_GPADC_CTRL1_CHOP_TEMP_EN,
> - .temp_data = SUN4I_GPADC_TEMP_DATA,
> + .temp_data = {SUN4I_GPADC_TEMP_DATA, 0, 0, 0},
> .sample_start = sun4i_gpadc_sample_start,
> .sample_end = sun4i_gpadc_sample_end,
> + .sensor_count = 1,
> };
>
> struct sun4i_gpadc_iio {
> @@ -135,6 +140,7 @@ struct sun4i_gpadc_iio {
> struct clk *bus_clk;
> struct clk *mod_clk;
> struct reset_control *reset;
> + int sensor_id;
> /* prevents concurrent reads of temperature and ADC */
> struct mutex mutex;
> struct thermal_zone_device *tzd;
> @@ -302,14 +308,15 @@ static int sun4i_gpadc_adc_read(struct iio_dev *indio_dev, int channel,
> return sun4i_gpadc_read(indio_dev, channel, val, info->fifo_data_irq);
> }
>
> -static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev, int *val)
> +static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev, int *val,
> + int sensor)
> {
> struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
>
> if (info->no_irq) {
> pm_runtime_get_sync(indio_dev->dev.parent);
>
> - regmap_read(info->regmap, info->data->temp_data, val);
> + regmap_read(info->regmap, info->data->temp_data[sensor], val);
>
> pm_runtime_mark_last_busy(indio_dev->dev.parent);
> pm_runtime_put_autosuspend(indio_dev->dev.parent);
> @@ -356,7 +363,7 @@ static int sun4i_gpadc_read_raw(struct iio_dev *indio_dev,
> ret = sun4i_gpadc_adc_read(indio_dev, chan->channel,
> val);
> else
> - ret = sun4i_gpadc_temp_read(indio_dev, val);
> + ret = sun4i_gpadc_temp_read(indio_dev, val, 0);
>
> if (ret)
> return ret;
> @@ -470,7 +477,7 @@ static int sun4i_gpadc_get_temp(void *data, int *temp)
> struct sun4i_gpadc_iio *info = data;
> int val, scale, offset;
>
> - if (sun4i_gpadc_temp_read(info->indio_dev, &val))
> + if (sun4i_gpadc_temp_read(info->indio_dev, &val, info->sensor_id))
> return -ETIMEDOUT;
>
> sun4i_gpadc_temp_scale(info->indio_dev, &scale);
> @@ -712,7 +719,7 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
> {
> struct sun4i_gpadc_iio *info;
> struct iio_dev *indio_dev;
> - int ret;
> + int ret, i;
>
> indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
> if (!indio_dev)
> @@ -745,9 +752,12 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
> pm_runtime_enable(&pdev->dev);
>
> if (IS_ENABLED(CONFIG_THERMAL_OF)) {
> - info->tzd = thermal_zone_of_sensor_register(info->sensor_device,
> - 0, info,
> - &sun4i_ts_tz_ops);
> + for (i = 0; i < info->data->sensor_count; i++) {
> + info->sensor_id = i;
> + info->tzd = thermal_zone_of_sensor_register(
> + info->sensor_device,
> + i, info, &sun4i_ts_tz_ops);
> + }
I'm not sure how that works. Isn't the info structure shared between
all the sensors? The sensor_id value would be always set to the last
sensor then.
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180129/92db8553/attachment.sig>
More information about the linux-arm-kernel
mailing list