[linux-sunxi][PATCH v2 5/5] arm64: allwinner: a64: Add DAI node for HDMI

[codekipper at gmail.com]

From: Marcus Cooper <codekipper at gmail.com>

Add the new DAI block for I2S2 which is used for HDMI audio.

Signed-off-by: Marcus Cooper <codekipper at gmail.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 1b6dc31e7d91..c913dada7653 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -449,6 +449,20 @@
 			status = "disabled";
 		};
 
+		i2s2: i2s at 1c22800 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-a64-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S2>;
+			dma-names = "tx";
+			dmas = <&dma 27>;
+			status = "disabled";
+		};
+
 		uart0: serial at 1c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
-- 
2.16.1