[PATCH 1/2] arm64: dts: sdm845: Add minimal dts/dtsi files for sdm845 SoC and MTP

[Stephen Boyd]

On 01/25, Rajendra Nayak wrote:
>  create mode 100644 arch/arm64/boot/dts/qcom/sdm845-mtp.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sdm845-mtp.dtsi

Do we really need two files? Maybe collapse the two?

>  create mode 100644 arch/arm64/boot/dts/qcom/sdm845.dtsi
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> new file mode 100644
> index 000000000000..a21f4912b3e2
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -0,0 +1,308 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. SDM845";
> +
> +	interrupt-parent = <&intc>;
> +
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	chosen { };
> +
> +	memory {
> +		device_type = "memory";
> +		/* We expect the bootloader to fill in the reg */
> +		reg = <0 0 0 0>;
> +	};
> +
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		CPU0: cpu at 0 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo";
> +			reg = <0x0 0x0>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_0>;
> +			L2_0: l2-cache {
> +				compatible = "cache";
> +				next-level-cache = <&L3_0>;
> +				L3_0: l3-cache {
> +				      compatible = "cache";
> +				};
> +			};
> +		};
> +
> +		CPU1: cpu at 100 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo";
> +			reg = <0x0 0x100>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_100>;
> +			L2_100: l2-cache {
> +				compatible = "cache";
> +				next-level-cache = <&L3_0>;
> +			};
> +		};
> +
> +		CPU2: cpu at 200 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo";
> +			reg = <0x0 0x200>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_200>;
> +			L2_200: l2-cache {
> +				compatible = "cache";
> +				next-level-cache = <&L3_0>;
> +			};
> +		};
> +
> +		CPU3: cpu at 300 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo";
> +			reg = <0x0 0x300>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_300>;
> +			L2_300: l2-cache {
> +				compatible = "cache";
> +				next-level-cache = <&L3_0>;
> +			};
> +		};
> +
> +		CPU4: cpu at 400 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo";
> +			reg = <0x0 0x400>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_400>;
> +			L2_400: l2-cache {
> +				compatible = "cache";
> +				next-level-cache = <&L3_0>;
> +			};
> +		};
> +
> +		CPU5: cpu at 500 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo";
> +			reg = <0x0 0x500>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_500>;
> +			L2_500: l2-cache {
> +				compatible = "cache";
> +				next-level-cache = <&L3_0>;
> +			};
> +		};
> +
> +		CPU6: cpu at 600 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo";
> +			reg = <0x0 0x600>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_600>;
> +			L2_600: l2-cache {
> +				compatible = "cache";
> +				next-level-cache = <&L3_0>;
> +			};
> +		};
> +
> +		CPU7: cpu at 700 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo";
> +			reg = <0x0 0x700>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_700>;
> +			L2_700: l2-cache {
> +				compatible = "cache";
> +				next-level-cache = <&L3_0>;
> +			};
> +		};
> +
> +		cpu-map {
> +			cluster0 {
> +				core0 {
> +					cpu = <&CPU0>;
> +				};
> +
> +				core1 {
> +					cpu = <&CPU1>;
> +				};
> +
> +				core2 {
> +					cpu = <&CPU2>;
> +				};
> +
> +				core3 {
> +					cpu = <&CPU3>;
> +				};
> +			};
> +
> +			cluster1 {
> +				core0 {
> +					cpu = <&CPU4>;
> +				};
> +
> +				core1 {
> +					cpu = <&CPU5>;
> +				};
> +
> +				core2 {
> +					cpu = <&CPU6>;
> +				};
> +
> +				core3 {
> +					cpu = <&CPU7>;
> +				};
> +			};
> +		};

>From what I recall, this layout causes the kernel to spew
warnings? I mean to say this is the power/performance view, but
not the architectural view.

> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,

Are we supposed to use the GIC_CPU_MASK_SIMPLE macros still?

> +			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
> +	};
> +
> +	clocks {
> +		xo_board: xo_board {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <19200000>;
> +			clock-output-names = "xo_board";

We can drop clock-output-names on these.

> +		};
> +
> +		sleep_clk: sleep_clk {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <32764>;
> +			clock-output-names = "sleep_clk";
> +		};
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +
> +	soc: soc {

Will anyone use this phandle?

> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0 0 0 0xffffffff>;
> +		compatible = "simple-bus";
> +
> +		intc: interrupt-controller at 17a00000 {
> +			compatible = "arm,gic-v3";
> +			#interrupt-cells = <3>;
> +			interrupt-controller;
> +			#redistributor-regions = <1>;
> +			redistributor-stride = <0x0 0x20000>;
> +			reg = <0x17a00000 0x10000>,     /* GICD */
> +			      <0x17a60000 0x100000>;    /* GICR * 8 */
> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;

Can you also add the ITS node please and mark it as disabled?
I'll send a patch to the list to skip status = "disabled" ones.
We may want to support ITS on these SoCs if the firmware is
different. 

> +		};
> +
> +		gcc: clock-controller at 100000 {
> +			compatible = "qcom,gcc-sdm845";
> +			reg = <0x100000 0x1f0000>;
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +		};
> +
> +		tlmm: pinctrl at 03400000 {

Drop leading zeroes please.

> +			compatible = "qcom,sdm845-pinctrl";
> +			reg = <0x03400000 0xc00000>;
> +			interrupts = <GIC_SPI 208 IRQ_TYPE_NONE>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		timer at 17C90000 {

Lowercase hex please.

> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +			compatible = "arm,armv7-timer-mem";
> +			reg = <0x17C90000 0x1000>;

Lowercase hex please.

> +			clock-frequency = <19200000>;

Drop this? Or we can't read it from the hardware so we have to
hardcode it?

> +
> +			frame at 17CA0000 {

Lowecase again.

> +				frame-number = <0>;
> +				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x17CA0000 0x1000>,
> +				      <0x17CB0000 0x1000>;
> +			};
> +

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project