[PATCH BUGFIX] ARM: dts: imx6ull: fix the imx6ull-14x14-evk configuration
Dong Aisheng
dongas86 at gmail.com
Fri Jan 26 00:54:19 PST 2018
Hi Lothar,
On Fri, Jan 26, 2018 at 4:25 PM, Lothar Waßmann <LW at karo-electronics.de> wrote:
> imx6ull-14x14-evk.dts currently includes the imx6ul.dtsi file for an
> i.MX6ULL SoC which is plain wrong.
>
> Rename the current imx6ul-14x14-evk.dts to .dtsi and include it from
> imx6ul-14x14-evk.dts and imx6ull-14x14-evk.dts, so that both can
> include the appropriate SoC specific (imx6ul.dtsi/imx6ull.dtsi) file.
>
> Signed-off-by: Lothar Waßmann <LW at KARO-electronics.de>
> ---
> arch/arm/boot/dts/imx6ul-14x14-evk.dts | 480 +-------------------------------
> arch/arm/boot/dts/imx6ull-14x14-evk.dts | 5 +-
> 2 files changed, 5 insertions(+), 480 deletions(-)
>
I'm okay with this idea.
But where is imx6ul-14x14-evk.dtsi file?
BTW, would you help also CC all IMX related patches to linux-imx at nxp.com
maillist in the future?
Most NXP/FSL internal driver onwers are also in this list that can help review.
Regards
Dong Aisheng
> diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
> index 18fdb08..6d720b2 100644
> --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts
> +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
> @@ -9,487 +9,9 @@
> /dts-v1/;
>
> #include "imx6ul.dtsi"
> +#include "imx6ul-14x14-evk.dtsi"
>
> / {
> model = "Freescale i.MX6 UltraLite 14x14 EVK Board";
> compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul";
> -
> - chosen {
> - stdout-path = &uart1;
> - };
> -
> - memory {
> - reg = <0x80000000 0x20000000>;
> - };
> -
> - backlight_display: backlight-display {
> - compatible = "pwm-backlight";
> - pwms = <&pwm1 0 5000000>;
> - brightness-levels = <0 4 8 16 32 64 128 255>;
> - default-brightness-level = <6>;
> - status = "okay";
> - };
> -
> -
> - reg_sd1_vmmc: regulator-sd1-vmmc {
> - compatible = "regulator-fixed";
> - regulator-name = "VSD_3V3";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
> - enable-active-high;
> - };
> -
> - sound {
> - compatible = "simple-audio-card";
> - simple-audio-card,name = "mx6ul-wm8960";
> - simple-audio-card,format = "i2s";
> - simple-audio-card,bitclock-master = <&dailink_master>;
> - simple-audio-card,frame-master = <&dailink_master>;
> - simple-audio-card,widgets =
> - "Microphone", "Mic Jack",
> - "Line", "Line In",
> - "Line", "Line Out",
> - "Speaker", "Speaker",
> - "Headphone", "Headphone Jack";
> - simple-audio-card,routing =
> - "Headphone Jack", "HP_L",
> - "Headphone Jack", "HP_R",
> - "Speaker", "SPK_LP",
> - "Speaker", "SPK_LN",
> - "Speaker", "SPK_RP",
> - "Speaker", "SPK_RN",
> - "LINPUT1", "Mic Jack",
> - "LINPUT3", "Mic Jack",
> - "RINPUT1", "Mic Jack",
> - "RINPUT2", "Mic Jack";
> -
> - simple-audio-card,cpu {
> - sound-dai = <&sai2>;
> - };
> -
> - dailink_master: simple-audio-card,codec {
> - sound-dai = <&codec>;
> - clocks = <&clks IMX6UL_CLK_SAI2>;
> - };
> - };
> -
> - panel {
> - compatible = "innolux,at043tn24";
> - backlight = <&backlight_display>;
> -
> - port {
> - panel_in: endpoint {
> - remote-endpoint = <&display_out>;
> - };
> - };
> - };
> -};
> -
> -&clks {
> - assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
> - assigned-clock-rates = <786432000>;
> -};
> -
> -&i2c2 {
> - clock_frequency = <100000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_i2c2>;
> - status = "okay";
> -
> - codec: wm8960 at 1a {
> - #sound-dai-cells = <0>;
> - compatible = "wlf,wm8960";
> - reg = <0x1a>;
> - wlf,shared-lrclk;
> - };
> -};
> -
> -&fec1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_enet1>;
> - phy-mode = "rmii";
> - phy-handle = <ðphy0>;
> - status = "okay";
> -};
> -
> -&fec2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_enet2>;
> - phy-mode = "rmii";
> - phy-handle = <ðphy1>;
> - status = "okay";
> -
> - mdio {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - ethphy0: ethernet-phy at 2 {
> - reg = <2>;
> - micrel,led-mode = <1>;
> - clocks = <&clks IMX6UL_CLK_ENET_REF>;
> - clock-names = "rmii-ref";
> - };
> -
> - ethphy1: ethernet-phy at 1 {
> - reg = <1>;
> - micrel,led-mode = <1>;
> - clocks = <&clks IMX6UL_CLK_ENET2_REF>;
> - clock-names = "rmii-ref";
> - };
> - };
> -};
> -
> -
> -&lcdif {
> - assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>;
> - assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_lcdif_dat
> - &pinctrl_lcdif_ctrl>;
> - status = "okay";
> -
> - port {
> - display_out: endpoint {
> - remote-endpoint = <&panel_in>;
> - };
> - };
> -};
> -
> -&pwm1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_pwm1>;
> - status = "okay";
> -};
> -
> -&qspi {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_qspi>;
> - status = "okay";
> -
> - flash0: n25q256a at 0 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "micron,n25q256a";
> - spi-max-frequency = <29000000>;
> - reg = <0>;
> - };
> -};
> -
> -&sai2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_sai2>;
> - assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
> - <&clks IMX6UL_CLK_SAI2>;
> - assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
> - assigned-clock-rates = <0>, <12288000>;
> - fsl,sai-mclk-direction-output;
> - status = "okay";
> -};
> -
> -&snvs_poweroff {
> - status = "okay";
> -};
> -
> -&tsc {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_tsc>;
> - xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
> - measure-delay-time = <0xffff>;
> - pre-charge-time = <0xfff>;
> - status = "okay";
> -};
> -
> -&uart1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_uart1>;
> - status = "okay";
> -};
> -
> -&uart2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_uart2>;
> - uart-has-rtscts;
> - status = "okay";
> -};
> -
> -&usbotg1 {
> - dr_mode = "otg";
> - status = "okay";
> -};
> -
> -&usbotg2 {
> - dr_mode = "host";
> - disable-over-current;
> - status = "okay";
> -};
> -
> -&usbphy1 {
> - fsl,tx-d-cal = <106>;
> -};
> -
> -&usbphy2 {
> - fsl,tx-d-cal = <106>;
> -};
> -
> -&usdhc1 {
> - pinctrl-names = "default", "state_100mhz", "state_200mhz";
> - pinctrl-0 = <&pinctrl_usdhc1>;
> - pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> - pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> - cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
> - keep-power-in-suspend;
> - wakeup-source;
> - vmmc-supply = <®_sd1_vmmc>;
> - status = "okay";
> -};
> -
> -&usdhc2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_usdhc2>;
> - no-1-8-v;
> - keep-power-in-suspend;
> - wakeup-source;
> - status = "okay";
> -};
> -
> -&wdog1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_wdog>;
> - fsl,ext-reset-output;
> -};
> -
> -&iomuxc {
> - pinctrl-names = "default";
> -
> - pinctrl_csi1: csi1grp {
> - fsl,pins = <
> - MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
> - MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
> - MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
> - MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088
> - MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x1b088
> - MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x1b088
> - MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x1b088
> - MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x1b088
> - MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x1b088
> - MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x1b088
> - MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x1b088
> - MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x1b088
> - >;
> - };
> -
> - pinctrl_enet1: enet1grp {
> - fsl,pins = <
> - MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
> - MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
> - MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
> - MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
> - MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
> - MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
> - MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
> - MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
> - >;
> - };
> -
> - pinctrl_enet2: enet2grp {
> - fsl,pins = <
> - MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
> - MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
> - MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
> - MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
> - MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
> - MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
> - MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
> - MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
> - MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
> - MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031
> - >;
> - };
> -
> - pinctrl_flexcan1: flexcan1grp{
> - fsl,pins = <
> - MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020
> - MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020
> - >;
> - };
> -
> - pinctrl_flexcan2: flexcan2grp{
> - fsl,pins = <
> - MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020
> - MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020
> - >;
> - };
> -
> - pinctrl_i2c1: i2c1grp {
> - fsl,pins = <
> - MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
> - MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
> - >;
> - };
> -
> - pinctrl_i2c2: i2c2grp {
> - fsl,pins = <
> - MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
> - MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
> - >;
> - };
> -
> - pinctrl_lcdif_dat: lcdifdatgrp {
> - fsl,pins = <
> - MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
> - MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
> - MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
> - MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
> - MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
> - MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
> - MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
> - MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
> - MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
> - MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
> - MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
> - MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
> - MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
> - MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
> - MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
> - MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
> - MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
> - MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
> - MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79
> - MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79
> - MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79
> - MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79
> - MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79
> - MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79
> - >;
> - };
> -
> - pinctrl_lcdif_ctrl: lcdifctrlgrp {
> - fsl,pins = <
> - MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
> - MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
> - MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
> - MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
> - /* used for lcd reset */
> - MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79
> - >;
> - };
> -
> - pinctrl_qspi: qspigrp {
> - fsl,pins = <
> - MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1
> - MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1
> - MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1
> - MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1
> - MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1
> - MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1
> - >;
> - };
> -
> - pinctrl_sai2: sai2grp {
> - fsl,pins = <
> - MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088
> - MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088
> - MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088
> - MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088
> - MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088
> - MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x17059
> - >;
> - };
> -
> - pinctrl_pwm1: pwm1grp {
> - fsl,pins = <
> - MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0
> - >;
> - };
> -
> - pinctrl_sim2: sim2grp {
> - fsl,pins = <
> - MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD 0xb808
> - MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK 0x31
> - MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B 0xb808
> - MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN 0xb808
> - MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD 0xb809
> - MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x3008
> - >;
> - };
> -
> - pinctrl_tsc: tscgrp {
> - fsl,pins = <
> - MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
> - MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
> - MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
> - MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0
> - >;
> - };
> -
> - pinctrl_uart1: uart1grp {
> - fsl,pins = <
> - MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
> - MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
> - >;
> - };
> -
> - pinctrl_uart2: uart2grp {
> - fsl,pins = <
> - MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
> - MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
> - MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x1b0b1
> - MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x1b0b1
> - >;
> - };
> -
> - pinctrl_usdhc1: usdhc1grp {
> - fsl,pins = <
> - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
> - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
> - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
> - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
> - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
> - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
> - MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */
> - MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x17059 /* SD1 VSELECT */
> - MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059 /* SD1 RESET */
> - >;
> - };
> -
> - pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
> - fsl,pins = <
> - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
> - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
> - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
> - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
> - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
> - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
> -
> - >;
> - };
> -
> - pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
> - fsl,pins = <
> - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
> - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
> - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
> - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
> - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
> - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
> - >;
> - };
> -
> - pinctrl_usdhc2: usdhc2grp {
> - fsl,pins = <
> - MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17059
> - MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
> - MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
> - MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
> - MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
> - MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
> - >;
> - };
> -
> - pinctrl_wdog: wdoggrp {
> - fsl,pins = <
> - MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0
> - >;
> - };
> };
> diff --git a/arch/arm/boot/dts/imx6ull-14x14-evk.dts b/arch/arm/boot/dts/imx6ull-14x14-evk.dts
> index 4741871..30ef603 100644
> --- a/arch/arm/boot/dts/imx6ull-14x14-evk.dts
> +++ b/arch/arm/boot/dts/imx6ull-14x14-evk.dts
> @@ -39,7 +39,10 @@
> * OTHER DEALINGS IN THE SOFTWARE.
> */
>
> -#include "imx6ul-14x14-evk.dts"
> +/dts-v1/;
> +
> +#include "imx6ull.dtsi"
> +#include "imx6ul-14x14-evk.dtsi"
>
> / {
> model = "Freescale i.MX6 UlltraLite 14x14 EVK Board";
> --
> 2.1.4
>
More information about the linux-arm-kernel
mailing list