[PATCH v6 2/2] media: V3s: Add support for Allwinner CSI.
kbuild test robot
lkp at intel.com
Thu Jan 25 16:04:18 PST 2018
Hi Yong,
I love your patch! Yet something to improve:
[auto build test ERROR on linuxtv-media/master]
[also build test ERROR on v4.15-rc9 next-20180119]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Yong-Deng/dt-bindings-media-Add-Allwinner-V3s-Camera-Sensor-Interface-CSI/20180126-054511
base: git://linuxtv.org/media_tree.git master
config: i386-allmodconfig (attached as .config)
compiler: gcc-7 (Debian 7.2.0-12) 7.2.1 20171025
reproduce:
# save the attached .config to linux build tree
make ARCH=i386
All errors (new ones prefixed by >>):
drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c: In function 'sun6i_csi_update_buf_addr':
>> drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c:567:31: error: 'PHYS_OFFSET' undeclared (first use in this function); did you mean 'PAGE_OFFSET'?
dma_addr_t bus_addr = addr - PHYS_OFFSET;
^~~~~~~~~~~
PAGE_OFFSET
drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c:567:31: note: each undeclared identifier is reported only once for each function it appears in
vim +567 drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
562
563 void sun6i_csi_update_buf_addr(struct sun6i_csi *csi, dma_addr_t addr)
564 {
565 struct sun6i_csi_dev *sdev = sun6i_csi_to_dev(csi);
566 /* transform physical address to bus address */
> 567 dma_addr_t bus_addr = addr - PHYS_OFFSET;
568
569 regmap_write(sdev->regmap, CSI_CH_F0_BUFA_REG,
570 (bus_addr + sdev->planar_offset[0]) >> 2);
571 if (sdev->planar_offset[1] != -1)
572 regmap_write(sdev->regmap, CSI_CH_F1_BUFA_REG,
573 (bus_addr + sdev->planar_offset[1]) >> 2);
574 if (sdev->planar_offset[2] != -1)
575 regmap_write(sdev->regmap, CSI_CH_F2_BUFA_REG,
576 (bus_addr + sdev->planar_offset[2]) >> 2);
577 }
578
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: .config.gz
Type: application/gzip
Size: 62442 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180126/f839cd5c/attachment-0001.gz>
More information about the linux-arm-kernel
mailing list