[PATCH] clk: Properly update prepare/enable count on orphan clock reparent

[Stephen Boyd]

On 01/15, Marek Szyprowski wrote:
> If orphaned clock has been already prepared/enabled (for example if it or
> one of its children has CLK_IS_CRITICAL flag), then the prepare/enable
> counters of the newly assigned parent are not updated correctly. This
> might later cause warnings during changing clock parents.
> 
> This patch fixes following warning on Exynos5422-based boards:
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 59 at drivers/clk/clk.c:811 clk_core_disable_lock+0x18/0x24
> Modules linked in:
> CPU: 0 PID: 59 Comm: kworker/0:1 Not tainted 4.15.0-rc7-next-20180115 #106
> Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
> Workqueue: pm genpd_power_off_work_fn
> [<c0111504>] (unwind_backtrace) from [<c010dbec>] (show_stack+0x10/0x14)
> [<c010dbec>] (show_stack) from [<c09b3f34>] (dump_stack+0x90/0xc8)
> [<c09b3f34>] (dump_stack) from [<c0125060>] (__warn+0xe4/0x110)
> [<c0125060>] (__warn) from [<c01250cc>] (warn_slowpath_null+0x40/0x48)
> [<c01250cc>] (warn_slowpath_null) from [<c048d584>] (clk_core_disable_lock+0x18/0x24)
> [<c048d584>] (clk_core_disable_lock) from [<c048e490>] (clk_core_disable_unprepare+0xc/0x20)
> [<c048e490>] (clk_core_disable_unprepare) from [<c048ea60>] (__clk_set_parent_after+0x48/0x4c)
> [<c048ea60>] (__clk_set_parent_after) from [<c048ec88>] (clk_core_set_parent_nolock+0x224/0x5b4)
> [<c048ec88>] (clk_core_set_parent_nolock) from [<c048f23c>] (clk_set_parent+0x38/0x6c)
> [<c048f23c>] (clk_set_parent) from [<c049c41c>] (exynos_pd_power+0x74/0x1cc)
> [<c049c41c>] (exynos_pd_power) from [<c0550768>] (genpd_power_off+0x164/0x264)
> [<c0550768>] (genpd_power_off) from [<c0550b34>] (genpd_power_off_work_fn+0x2c/0x40)
> [<c0550b34>] (genpd_power_off_work_fn) from [<c01432e4>] (process_one_work+0x1d0/0x7bc)
> [<c01432e4>] (process_one_work) from [<c014393c>] (worker_thread+0x34/0x4dc)
> [<c014393c>] (worker_thread) from [<c014a0d0>] (kthread+0x128/0x164)
> [<c014a0d0>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20)
> Exception stack(0xeeb01fb0 to 0xeeb01ff8)
> 1fa0:                                     00000000 00000000 00000000 00000000
> 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000
> ---[ end trace 503c239fb760f17a ]---
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 59 at drivers/clk/clk.c:684 clk_core_disable_unprepare+0x18/0x20
> Modules linked in:
> CPU: 0 PID: 59 Comm: kworker/0:1 Tainted: G        W        4.15.0-rc7-next-20180115 #106
> Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
> Workqueue: pm genpd_power_off_work_fn
> [<c0111504>] (unwind_backtrace) from [<c010dbec>] (show_stack+0x10/0x14)
> [<c010dbec>] (show_stack) from [<c09b3f34>] (dump_stack+0x90/0xc8)
> [<c09b3f34>] (dump_stack) from [<c0125060>] (__warn+0xe4/0x110)
> [<c0125060>] (__warn) from [<c01250cc>] (warn_slowpath_null+0x40/0x48)
> [<c01250cc>] (warn_slowpath_null) from [<c048e49c>] (clk_core_disable_unprepare+0x18/0x20)
> [<c048e49c>] (clk_core_disable_unprepare) from [<c048ea60>] (__clk_set_parent_after+0x48/0x4c)
> [<c048ea60>] (__clk_set_parent_after) from [<c048ec88>] (clk_core_set_parent_nolock+0x224/0x5b4)
> [<c048ec88>] (clk_core_set_parent_nolock) from [<c048f23c>] (clk_set_parent+0x38/0x6c)
> [<c048f23c>] (clk_set_parent) from [<c049c41c>] (exynos_pd_power+0x74/0x1cc)
> [<c049c41c>] (exynos_pd_power) from [<c0550768>] (genpd_power_off+0x164/0x264)
> [<c0550768>] (genpd_power_off) from [<c0550b34>] (genpd_power_off_work_fn+0x2c/0x40)
> [<c0550b34>] (genpd_power_off_work_fn) from [<c01432e4>] (process_one_work+0x1d0/0x7bc)
> [<c01432e4>] (process_one_work) from [<c014393c>] (worker_thread+0x34/0x4dc)
> [<c014393c>] (worker_thread) from [<c014a0d0>] (kthread+0x128/0x164)
> [<c014a0d0>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20)
> Exception stack(0xeeb01fb0 to 0xeeb01ff8)
> 1fa0:                                     00000000 00000000 00000000 00000000
> 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000
> ---[ end trace 503c239fb760f17b ]---
> ------------[ cut here ]------------
> 
> Fixes: f8f8f1d04494 ("clk: Don't touch hardware when reparenting during registration")
> Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
> ---
>  drivers/clk/clk.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> index 0f686a9dac3e..d33c087d7868 100644
> --- a/drivers/clk/clk.c
> +++ b/drivers/clk/clk.c
> @@ -2982,6 +2982,10 @@ static int __clk_core_init(struct clk_core *core)
>  		if (parent) {
>  			/* update the clk tree topology */
>  			flags = clk_enable_lock();

This is the spinlock?

> +			if (orphan->prepare_count)
> +				clk_core_prepare(parent);

And this is prepare mutex? Doesn't sound like it will work.

> +			if (orphan->enable_count)
> +				clk_core_enable(parent);

This would be OK, but then we might touch the hardware again?

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project