[PATCH 3/4] arm64: add support for i.MX8M EVK board

[Shawn Guo]

On Wed, Jan 17, 2018 at 07:32:43PM +0100, Lucas Stach wrote:

> +	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x85
> +			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc5
> +			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc5
> +			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc5
> +			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc5
> +			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc5
> +			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
> +		>;
> +		};

Bad indentation.

Shawn

> +
> +	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x87
> +			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc7
> +			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc7
> +			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc7
> +			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc7
> +			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc7
> +			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
> +		>;
> +	};
> +};
> -- 
> 2.11.0
>