[PATCH] dt-bindings: display: stm32: correct clock-names in dsi panel example

[Rob Herring]

On Sun, Jan 21, 2018 at 2:58 PM, Philippe Cornu <philippe.cornu at st.com> wrote:
> In the dsi panel example, clock names in the "clock-names"
> field have been swapped:
> * "pclk" (peripheral clock) is <&rcc 1 CLK_F469_DSI> on stm32f4
> * "ref" (dsi phy pll ref clock) is <&clk_hse> on stm32f4
>
> Signed-off-by: Philippe Cornu <philippe.cornu at st.com>
> ---
>  Documentation/devicetree/bindings/display/st,stm32-ltdc.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
> index 029252253ad4..3eb1b48b47dd 100644
> --- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
> +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
> @@ -98,7 +98,7 @@ Example 2: DSI panel
>                         compatible = "st,stm32-dsi";
>                         reg = <0x40016c00 0x800>;
>                         clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>;
> -                       clock-names = "ref", "pclk";
> +                       clock-names = "pclk", "ref";

There is no way to tell they are reversed because pclk is not even
documented. Please fix that too.

>                         resets = <&rcc STM32F4_APB2_RESET(DSI)>;
>                         reset-names = "apb";
>
> --
> 2.15.1
>