[RFC PATCH 7/9] clk: sunxi-ng: add support for suniv SoC

Icenowy Zheng icenowy at aosc.io
Fri Jan 19 15:17:33 PST 2018


The suniv SoC (the chip in some new F-series products of Allwinner) has
a CCU which seems to be a stripped version of the CCU in SoCs after
sun6i.

Add support for the CCU.

Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
---
 drivers/clk/sunxi-ng/Kconfig          |   5 +
 drivers/clk/sunxi-ng/Makefile         |   1 +
 drivers/clk/sunxi-ng/ccu-suniv.c      | 536 ++++++++++++++++++++++++++++++++++
 drivers/clk/sunxi-ng/ccu-suniv.h      |  34 +++
 include/dt-bindings/clock/suniv-ccu.h |  69 +++++
 include/dt-bindings/reset/suniv-ccu.h |  37 +++
 6 files changed, 682 insertions(+)
 create mode 100644 drivers/clk/sunxi-ng/ccu-suniv.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-suniv.h
 create mode 100644 include/dt-bindings/clock/suniv-ccu.h
 create mode 100644 include/dt-bindings/reset/suniv-ccu.h

diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 6427d0ebe2de..138fe1ce763b 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -6,6 +6,11 @@ config SUNXI_CCU
 
 if SUNXI_CCU
 
+config SUNIV_CCU
+	bool "Support for the Allwinner newer F-series SoC CCU"
+	default MACH_SUNIV
+	depends on MACH_SUNIV || COMPILE_TEST
+
 config SUN50I_A64_CCU
 	bool "Support for the Allwinner A64 CCU"
 	default ARM64 && ARCH_SUNXI
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 4141c3fe08ae..c667b60c7f61 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -21,6 +21,7 @@ lib-$(CONFIG_SUNXI_CCU)		+= ccu_nm.o
 lib-$(CONFIG_SUNXI_CCU)		+= ccu_mp.o
 
 # SoC support
+obj-$(CONFIG_SUNIV_CCU)		+= ccu-suniv.o
 obj-$(CONFIG_SUN50I_A64_CCU)	+= ccu-sun50i-a64.o
 obj-$(CONFIG_SUN4I_A10_CCU)	+= ccu-sun4i-a10.o
 obj-$(CONFIG_SUN5I_CCU)		+= ccu-sun5i.o
diff --git a/drivers/clk/sunxi-ng/ccu-suniv.c b/drivers/clk/sunxi-ng/ccu-suniv.c
new file mode 100644
index 000000000000..d6040b2b147c
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-suniv.c
@@ -0,0 +1,536 @@
+/*
+ * Copyright (c) 2016 Icenowy Zheng <icenowy at aosc.io>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-suniv.h"
+
+static struct ccu_nkmp pll_cpu_clk = {
+	.enable = BIT(31),
+	.lock	= BIT(28),
+
+	.n	= _SUNXI_CCU_MULT(8, 5),
+	.k	= _SUNXI_CCU_MULT(4, 2),
+	.m	= _SUNXI_CCU_DIV(0, 2),
+	/* MAX is guessed by the BSP table */
+	.p	= _SUNXI_CCU_DIV_MAX(16, 2, 4),
+
+	.common	= {
+		.reg		= 0x000,
+		.hw.init	= CLK_HW_INIT("pll-cpu", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names
+ */
+#define SUNIV_PLL_AUDIO_REG	0x008
+
+static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
+				   "osc24M", 0x008,
+				   8, 7,		/* N */
+				   0, 5,		/* M */
+				   BIT(31),		/* gate */
+				   BIT(28),		/* lock */
+				   CLK_SET_RATE_UNGATE);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video_clk, "pll-video",
+					"osc24M", 0x010,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					CLK_SET_RATE_UNGATE);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
+					"osc24M", 0x018,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					CLK_SET_RATE_UNGATE);
+
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr0_clk, "pll-ddr",
+				    "osc24M", 0x020,
+				    8, 5,		/* N */
+				    4, 2,		/* K */
+				    0, 2,		/* M */
+				    BIT(31),		/* gate */
+				    BIT(28),		/* lock */
+				    CLK_IS_CRITICAL);
+
+static struct ccu_nk pll_periph_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.k		= _SUNXI_CCU_MULT(4, 2),
+	.n		= _SUNXI_CCU_MULT(8, 5),
+	.common		= {
+		.reg		= 0x028,
+		.hw.init	= CLK_HW_INIT("pll-periph", "osc24M",
+					      &ccu_nk_ops, 0),
+	},
+};
+
+static const char * const cpu_parents[] = { "osc32k", "osc24M",
+					     "pll-cpu" , "pll-cpu" };
+static SUNXI_CCU_MUX(cpu_clk, "cpu", cpu_parents,
+		     0x050, 16, 2, CLK_IS_CRITICAL | CLK_SET_RATE_PARENT);
+
+static const char * const ahb_parents[] = { "osc32k", "osc24M",
+					    "cpu" , "pll-periph" };
+static const struct ccu_mux_var_prediv ahb_predivs[] = {
+	{ .index = 3, .shift = 6, .width = 2 },
+};
+static struct ccu_div ahb_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+	.mux		= {
+		.shift	= 12,
+		.width	= 2,
+
+		.var_predivs	= ahb_predivs,
+		.n_var_predivs	= ARRAY_SIZE(ahb_predivs),
+	},
+
+	.common		= {
+		.reg		= 0x054,
+		.features	= CCU_FEATURE_VARIABLE_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("ahb",
+						      ahb_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static struct clk_div_table apb_div_table[] = {
+	{ .val = 0, .div = 2 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 8 },
+	{ /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb_clk, "apb", "ahb",
+			   0x054, 8, 2, apb_div_table, 0);
+
+static SUNXI_CCU_GATE(bus_mmc0_clk,	"bus-mmc0",	"ahb",
+		      0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_mmc1_clk,	"bus-mmc1",	"ahb",
+		      0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_dram_clk,	"bus-dram",	"ahb",
+		      0x060, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_spi0_clk,	"bus-spi0",	"ahb",
+		      0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_spi1_clk,	"bus-spi1",	"ahb",
+		      0x060, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_otg_clk,	"bus-otg",	"ahb",
+		      0x060, BIT(24), 0);
+
+static SUNXI_CCU_GATE(bus_ve_clk,	"bus-ve",	"ahb",
+		      0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_lcd_clk,	"bus-lcd",	"ahb",
+		      0x064, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_deinterlace_clk,	"bus-deinterlace",	"ahb",
+		      0x064, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_csi_clk,	"bus-csi",	"ahb",
+		      0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_tvd_clk,	"bus-tvd",	"ahb",
+		      0x064, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_tve_clk,	"bus-tve",	"ahb",
+		      0x064, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_de_be_clk,	"bus-de-be",	"ahb",
+		      0x064, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_de_fe_clk,	"bus-de-fe",	"ahb",
+		      0x064, BIT(14), 0);
+
+static SUNXI_CCU_GATE(bus_codec_clk,	"bus-codec",	"apb",
+		      0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_spdif_clk,	"bus-spdif",	"apb",
+		      0x068, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_ir_clk,	"bus-ir",	"apb",
+		      0x068, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_rsb_clk,	"bus-rsb",	"apb",
+		      0x068, BIT(3), 0);
+static SUNXI_CCU_GATE(bus_i2s0_clk,	"bus-i2s0",	"apb",
+		      0x068, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_i2c0_clk,	"bus-i2c0",	"apb",
+		      0x068, BIT(16), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk,	"bus-i2c1",	"apb",
+		      0x068, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_i2c2_clk,	"bus-i2c2",	"apb",
+		      0x068, BIT(18), 0);
+static SUNXI_CCU_GATE(bus_pio_clk,	"bus-pio",	"apb",
+		      0x068, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_uart0_clk,	"bus-uart0",	"apb",
+		      0x068, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk,	"bus-uart1",	"apb",
+		      0x068, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk,	"bus-uart2",	"apb",
+		      0x068, BIT(22), 0);
+
+static const char * const mod0_default_parents[] = { "osc24M", "pll-periph" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc0_sample_clk, "mmc0_sample", "mmc0",
+		       0x088, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc0_output_clk, "mmc0_output", "mmc0",
+		       0x088, 8, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1_sample", "mmc1",
+		       0x08c, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1_output", "mmc1",
+		       0x08c, 8, 3, 0);
+
+static const char * const i2s_spdif_parents[] = { "pll-audio-8x",
+						  "pll-audio-4x",
+						  "pll-audio-2x",
+						  "pll-audio" };
+
+static SUNXI_CCU_MUX_WITH_GATE(i2s_clk, "i2s", i2s_spdif_parents,
+			       0x0b0, 16, 2, BIT(31), 0);
+
+static SUNXI_CCU_MUX_WITH_GATE(spdif_clk, "spdif", i2s_spdif_parents,
+			       0x0b4, 16, 2, BIT(31), 0);
+
+/* The BSP header file has a CIR_CFG, but no mod clock uses this definition */
+
+static SUNXI_CCU_GATE(usb_phy0_clk,	"usb-phy0",	"osc24M",
+		      0x0cc, BIT(8), 0);
+
+static SUNXI_CCU_GATE(dram_ve_clk,	"dram-ve",	"pll-ddr",
+		      0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi_clk,	"dram-csi",	"pll-ddr",
+		      0x100, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_deinterlace_clk,	"dram-deinterlace",
+		      "pll-ddr", 0x100, BIT(2), 0);
+static SUNXI_CCU_GATE(dram_tvd_clk,	"dram-tvd",	"pll-ddr",
+		      0x100, BIT(3), 0);
+static SUNXI_CCU_GATE(dram_de_fe_clk,	"dram-de-fe",	"pll-ddr",
+		      0x100, BIT(24), 0);
+static SUNXI_CCU_GATE(dram_de_be_clk,	"dram-de-be",	"pll-ddr",
+		      0x100, BIT(26), 0);
+
+static const char * const de_parents[] = { "pll-video", "pll-periph" };
+static const u8 de_table[] = { 0, 2, };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(de_be_clk, "de-be",
+				       de_parents, de_table,
+				       0x104, 0, 4, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(de_fe_clk, "de-fe",
+				       de_parents, de_table,
+				       0x10c, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const tcon_parents[] = { "pll-video", "pll-video-2x" };
+static const u8 tcon_table[] = { 0, 2, };
+static SUNXI_CCU_MUX_TABLE_WITH_GATE(tcon_clk, "tcon",
+				     tcon_parents, tcon_table,
+				     0x118, 24, 3, BIT(31),
+				     CLK_SET_RATE_PARENT);
+
+static const char * const deinterlace_parents[] = { "pll-video",
+						    "pll-video-2x" };
+static const u8 deinterlace_table[] = { 0, 2, };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(deinterlace_clk, "deinterlace",
+				       deinterlace_parents, deinterlace_table,
+				       0x11c, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const tve_clk2_parents[] = { "pll-video",
+						 "pll-video-2x" };
+static const u8 tve_clk2_table[] = { 0, 2, };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(tve_clk2_clk, "tve-clk2",
+				       tve_clk2_parents, tve_clk2_table,
+				       0x120, 0, 4, 24, 3, BIT(31), 0);
+static SUNXI_CCU_M_WITH_GATE(tve_clk1_clk, "tve-clk1", "tve-clk2",
+			     0x120, 8, 1, BIT(15), 0);
+
+static const char * const tvd_parents[] = { "pll-video", "osc24M",
+					    "pll-video-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(tvd_clk, "tvd", tvd_parents,
+				 0x124, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const csi_parents[] = { "pll-video", "osc24M" };
+static const u8 csi_table[] = { 0, 5, };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi_clk, "csi", csi_parents, csi_table,
+				       0x120, 0, 4, 8, 3, BIT(15), 0);
+
+/*
+ * TODO: BSP says the parent is pll-audio, however common sense and experience
+ * told us it should be pll-ve. pll-ve is totally not used in BSP code.
+ */
+static SUNXI_CCU_GATE(ve_clk, "ve", "pll-audio", 0x13c, BIT(31), 0);
+
+static SUNXI_CCU_GATE(codec_clk, "codec", "pll-audio", 0x140, BIT(31), 0);
+
+static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M", 0x144, BIT(31), 0);
+
+static struct ccu_common *suniv_ccu_clks[] = {
+	&pll_cpu_clk.common,
+	&pll_audio_base_clk.common,
+	&pll_video_clk.common,
+	&pll_ve_clk.common,
+	&pll_ddr0_clk.common,
+	&pll_periph_clk.common,
+	&cpu_clk.common,
+	&ahb_clk.common,
+	&apb_clk.common,
+	&bus_mmc0_clk.common,
+	&bus_mmc1_clk.common,
+	&bus_dram_clk.common,
+	&bus_spi0_clk.common,
+	&bus_spi1_clk.common,
+	&bus_otg_clk.common,
+	&bus_ve_clk.common,
+	&bus_lcd_clk.common,
+	&bus_deinterlace_clk.common,
+	&bus_csi_clk.common,
+	&bus_tve_clk.common,
+	&bus_tvd_clk.common,
+	&bus_de_be_clk.common,
+	&bus_de_fe_clk.common,
+	&bus_codec_clk.common,
+	&bus_spdif_clk.common,
+	&bus_ir_clk.common,
+	&bus_rsb_clk.common,
+	&bus_i2s0_clk.common,
+	&bus_i2c0_clk.common,
+	&bus_i2c1_clk.common,
+	&bus_i2c2_clk.common,
+	&bus_pio_clk.common,
+	&bus_uart0_clk.common,
+	&bus_uart1_clk.common,
+	&bus_uart2_clk.common,
+	&mmc0_clk.common,
+	&mmc0_sample_clk.common,
+	&mmc0_output_clk.common,
+	&mmc1_clk.common,
+	&mmc1_sample_clk.common,
+	&mmc1_output_clk.common,
+	&i2s_clk.common,
+	&spdif_clk.common,
+	&usb_phy0_clk.common,
+	&dram_ve_clk.common,
+	&dram_csi_clk.common,
+	&dram_deinterlace_clk.common,
+	&dram_tvd_clk.common,
+	&dram_de_fe_clk.common,
+	&dram_de_be_clk.common,
+	&de_be_clk.common,
+	&de_fe_clk.common,
+	&tcon_clk.common,
+	&deinterlace_clk.common,
+	&tve_clk2_clk.common,
+	&tve_clk1_clk.common,
+	&tvd_clk.common,
+	&csi_clk.common,
+	&ve_clk.common,
+	&codec_clk.common,
+	&avs_clk.common,
+};
+
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+			"pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+			"pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+			"pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+			"pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_video_2x_clk, "pll-video-2x",
+			"pll-video", 1, 2, 0);
+
+static struct clk_hw_onecell_data suniv_hw_clks = {
+	.hws	= {
+		[CLK_PLL_CPU]		= &pll_cpu_clk.common.hw,
+		[CLK_PLL_AUDIO_BASE]	= &pll_audio_base_clk.common.hw,
+		[CLK_PLL_AUDIO]		= &pll_audio_clk.hw,
+		[CLK_PLL_AUDIO_2X]	= &pll_audio_2x_clk.hw,
+		[CLK_PLL_AUDIO_4X]	= &pll_audio_4x_clk.hw,
+		[CLK_PLL_AUDIO_8X]	= &pll_audio_8x_clk.hw,
+		[CLK_PLL_VIDEO]		= &pll_video_clk.common.hw,
+		[CLK_PLL_VIDEO_2X]	= &pll_video_2x_clk.hw,
+		[CLK_PLL_VE]		= &pll_ve_clk.common.hw,
+		[CLK_PLL_DDR0]		= &pll_ddr0_clk.common.hw,
+		[CLK_PLL_PERIPH]	= &pll_periph_clk.common.hw,
+		[CLK_CPU]		= &cpu_clk.common.hw,
+		[CLK_AHB]		= &ahb_clk.common.hw,
+		[CLK_APB]		= &apb_clk.common.hw,
+		[CLK_BUS_MMC0]		= &bus_mmc0_clk.common.hw,
+		[CLK_BUS_MMC1]		= &bus_mmc1_clk.common.hw,
+		[CLK_BUS_DRAM]		= &bus_dram_clk.common.hw,
+		[CLK_BUS_SPI0]		= &bus_spi0_clk.common.hw,
+		[CLK_BUS_SPI1]		= &bus_spi1_clk.common.hw,
+		[CLK_BUS_OTG]		= &bus_otg_clk.common.hw,
+		[CLK_BUS_VE]		= &bus_ve_clk.common.hw,
+		[CLK_BUS_LCD]		= &bus_lcd_clk.common.hw,
+		[CLK_BUS_DEINTERLACE]	= &bus_deinterlace_clk.common.hw,
+		[CLK_BUS_CSI]		= &bus_csi_clk.common.hw,
+		[CLK_BUS_TVD]		= &bus_tvd_clk.common.hw,
+		[CLK_BUS_TVE]		= &bus_tve_clk.common.hw,
+		[CLK_BUS_DE_BE]		= &bus_de_be_clk.common.hw,
+		[CLK_BUS_DE_FE]		= &bus_de_fe_clk.common.hw,
+		[CLK_BUS_CODEC]		= &bus_codec_clk.common.hw,
+		[CLK_BUS_SPDIF]		= &bus_spdif_clk.common.hw,
+		[CLK_BUS_IR]		= &bus_ir_clk.common.hw,
+		[CLK_BUS_RSB]		= &bus_rsb_clk.common.hw,
+		[CLK_BUS_I2S0]		= &bus_i2s0_clk.common.hw,
+		[CLK_BUS_I2C0]		= &bus_i2c0_clk.common.hw,
+		[CLK_BUS_I2C1]		= &bus_i2c1_clk.common.hw,
+		[CLK_BUS_I2C2]		= &bus_i2c2_clk.common.hw,
+		[CLK_BUS_PIO]		= &bus_pio_clk.common.hw,
+		[CLK_BUS_UART0]		= &bus_uart0_clk.common.hw,
+		[CLK_BUS_UART1]		= &bus_uart1_clk.common.hw,
+		[CLK_BUS_UART2]		= &bus_uart2_clk.common.hw,
+		[CLK_MMC0]		= &mmc0_clk.common.hw,
+		[CLK_MMC0_SAMPLE]	= &mmc0_sample_clk.common.hw,
+		[CLK_MMC0_OUTPUT]	= &mmc0_output_clk.common.hw,
+		[CLK_MMC1]		= &mmc1_clk.common.hw,
+		[CLK_MMC1_SAMPLE]	= &mmc1_sample_clk.common.hw,
+		[CLK_MMC1_OUTPUT]	= &mmc1_output_clk.common.hw,
+		[CLK_I2S]		= &i2s_clk.common.hw,
+		[CLK_SPDIF]		= &spdif_clk.common.hw,
+		[CLK_USB_PHY0]		= &usb_phy0_clk.common.hw,
+		[CLK_DRAM_VE]		= &dram_ve_clk.common.hw,
+		[CLK_DRAM_CSI]		= &dram_csi_clk.common.hw,
+		[CLK_DRAM_DEINTERLACE]	= &dram_deinterlace_clk.common.hw,
+		[CLK_DRAM_TVD]		= &dram_tvd_clk.common.hw,
+		[CLK_DRAM_DE_FE]	= &dram_de_fe_clk.common.hw,
+		[CLK_DRAM_DE_BE]	= &dram_de_be_clk.common.hw,
+		[CLK_DE_BE]		= &de_be_clk.common.hw,
+		[CLK_DE_FE]		= &de_fe_clk.common.hw,
+		[CLK_TCON]		= &tcon_clk.common.hw,
+		[CLK_DEINTERLACE]	= &deinterlace_clk.common.hw,
+		[CLK_TVE2_CLK]		= &tve_clk2_clk.common.hw,
+		[CLK_TVE1_CLK]		= &tve_clk1_clk.common.hw,
+		[CLK_TVD]		= &tvd_clk.common.hw,
+		[CLK_CSI]		= &csi_clk.common.hw,
+		[CLK_VE]		= &ve_clk.common.hw,
+		[CLK_CODEC]		= &codec_clk.common.hw,
+		[CLK_AVS]		= &avs_clk.common.hw,
+	},
+	.num	= CLK_NUMBER,
+};
+
+static struct ccu_reset_map suniv_ccu_resets[] = {
+	[RST_USB_PHY0]		=  { 0x0cc, BIT(0) },
+
+	[RST_BUS_MMC0]		=  { 0x2c0, BIT(8) },
+	[RST_BUS_MMC1]		=  { 0x2c0, BIT(9) },
+	[RST_BUS_DRAM]		=  { 0x2c0, BIT(14) },
+	[RST_BUS_SPI0]		=  { 0x2c0, BIT(20) },
+	[RST_BUS_SPI1]		=  { 0x2c0, BIT(21) },
+	[RST_BUS_OTG]		=  { 0x2c0, BIT(24) },
+	[RST_BUS_VE]		=  { 0x2c4, BIT(0) },
+	[RST_BUS_LCD]		=  { 0x2c4, BIT(4) },
+	[RST_BUS_DEINTERLACE]	=  { 0x2c4, BIT(5) },
+	[RST_BUS_CSI]		=  { 0x2c4, BIT(8) },
+	[RST_BUS_TVD]		=  { 0x2c4, BIT(9) },
+	[RST_BUS_TVE]		=  { 0x2c4, BIT(10) },
+	[RST_BUS_DE_BE]		=  { 0x2c4, BIT(12) },
+	[RST_BUS_DE_FE]		=  { 0x2c4, BIT(14) },
+	[RST_BUS_CODEC]		=  { 0x2d0, BIT(0) },
+	[RST_BUS_SPDIF]		=  { 0x2d0, BIT(1) },
+	[RST_BUS_IR]		=  { 0x2d0, BIT(2) },
+	[RST_BUS_RSB]		=  { 0x2d0, BIT(3) },
+	[RST_BUS_I2S0]		=  { 0x2d0, BIT(12) },
+	[RST_BUS_I2C0]		=  { 0x2d0, BIT(16) },
+	[RST_BUS_I2C1]		=  { 0x2d0, BIT(17) },
+	[RST_BUS_I2C2]		=  { 0x2d0, BIT(18) },
+	[RST_BUS_UART0]		=  { 0x2d0, BIT(20) },
+	[RST_BUS_UART1]		=  { 0x2d0, BIT(21) },
+	[RST_BUS_UART2]		=  { 0x2d0, BIT(22) },
+};
+
+static const struct sunxi_ccu_desc suniv_ccu_desc = {
+	.ccu_clks	= suniv_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(suniv_ccu_clks),
+
+	.hw_clks	= &suniv_hw_clks,
+
+	.resets		= suniv_ccu_resets,
+	.num_resets	= ARRAY_SIZE(suniv_ccu_resets),
+};
+
+static struct ccu_pll_nb suniv_pll_cpu_nb = {
+	.common	= &pll_cpu_clk.common,
+	/* copy from pll_cpu_clk */
+	.enable	= BIT(31),
+	.lock	= BIT(28),
+};
+
+static struct ccu_mux_nb suniv_cpu_nb = {
+	.common		= &cpu_clk.common,
+	.cm		= &cpu_clk.mux,
+	.delay_us	= 1, /* > 8 clock cycles at 24 MHz */
+	.bypass_index	= 1, /* index of 24 MHz oscillator */
+};
+
+static void __init suniv_ccu_setup(struct device_node *node)
+{
+	void __iomem *reg;
+	u32 val;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("%pOF: Could not map the clock registers\n", node);
+		return;
+	}
+
+	/* Force the PLL-Audio-1x divider to 4 */
+	val = readl(reg + SUNIV_PLL_AUDIO_REG);
+	val &= ~GENMASK(19, 16);
+	writel(val | (3 << 16), reg + SUNIV_PLL_AUDIO_REG);
+
+	sunxi_ccu_probe(node, reg, &suniv_ccu_desc);
+
+	/* Gate then ungate PLL CPU after any rate changes */
+	ccu_pll_notifier_register(&suniv_pll_cpu_nb);
+
+	/* Reparent CPU during PLL CPU rate changes */
+	ccu_mux_notifier_register(pll_cpu_clk.common.hw.clk,
+				  &suniv_cpu_nb);
+}
+CLK_OF_DECLARE(suniv_ccu, "allwinner,suniv-ccu",
+	       suniv_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-suniv.h b/drivers/clk/sunxi-ng/ccu-suniv.h
new file mode 100644
index 000000000000..9b9cd19ea5ee
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-suniv.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2017 Icenowy Zheng <icenowy at aosc.io>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _CCU_SUNIV_H_
+#define _CCU_SUNIV_H_
+
+#include <dt-bindings/clock/suniv-ccu.h>
+#include <dt-bindings/reset/suniv-ccu.h>
+
+#define CLK_PLL_CPU		0
+#define CLK_PLL_AUDIO_BASE	1
+#define CLK_PLL_AUDIO		2
+#define CLK_PLL_AUDIO_2X	3
+#define CLK_PLL_AUDIO_4X	4
+#define CLK_PLL_AUDIO_8X	5
+#define CLK_PLL_VIDEO		6
+#define CLK_PLL_VIDEO_2X	7
+#define CLK_PLL_VE		8
+#define CLK_PLL_DDR0		9
+#define CLK_PLL_PERIPH		10
+
+/* CPU clock is exported */
+
+#define CLK_AHB			12
+#define CLK_APB			13
+
+/* All bus gates, DRAM gates and mod clocks are exported */
+
+#define CLK_NUMBER		(CLK_AVS + 1)
+
+#endif /* _CCU_SUNIV_H_ */
diff --git a/include/dt-bindings/clock/suniv-ccu.h b/include/dt-bindings/clock/suniv-ccu.h
new file mode 100644
index 000000000000..9c22d70b2cff
--- /dev/null
+++ b/include/dt-bindings/clock/suniv-ccu.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright (c) 2018 Icenowy Zheng <icenowy at aosc.xyz>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUNIV_H_
+#define _DT_BINDINGS_CLK_SUNIV_H_
+
+#define CLK_CPU			11
+
+#define CLK_BUS_MMC0		14
+#define CLK_BUS_MMC1		15
+#define CLK_BUS_DRAM		16
+#define CLK_BUS_SPI0		17
+#define CLK_BUS_SPI1		18
+#define CLK_BUS_OTG		19
+#define CLK_BUS_VE		20
+#define CLK_BUS_LCD		21
+#define CLK_BUS_DEINTERLACE	22
+#define CLK_BUS_CSI		23
+#define CLK_BUS_TVD		24
+#define CLK_BUS_TVE		25
+#define CLK_BUS_DE_BE		26
+#define CLK_BUS_DE_FE		27
+#define CLK_BUS_CODEC		28
+#define CLK_BUS_SPDIF		29
+#define CLK_BUS_IR		30
+#define CLK_BUS_RSB		31
+#define CLK_BUS_I2S0		32
+#define CLK_BUS_I2C0		33
+#define CLK_BUS_I2C1		34
+#define CLK_BUS_I2C2		35
+#define CLK_BUS_PIO		36
+#define CLK_BUS_UART0		37
+#define CLK_BUS_UART1		38
+#define CLK_BUS_UART2		39
+
+#define CLK_MMC0		40
+#define CLK_MMC0_SAMPLE		41
+#define CLK_MMC0_OUTPUT		42
+#define CLK_MMC1		43
+#define CLK_MMC1_SAMPLE		44
+#define CLK_MMC1_OUTPUT		45
+#define CLK_I2S			46
+#define CLK_SPDIF		47
+
+#define CLK_USB_PHY0		48
+
+#define CLK_DRAM_VE		49
+#define CLK_DRAM_CSI		50
+#define CLK_DRAM_DEINTERLACE	51
+#define CLK_DRAM_TVD		52
+#define CLK_DRAM_DE_FE		53
+#define CLK_DRAM_DE_BE		54
+
+#define CLK_DE_BE		55
+#define CLK_DE_FE		56
+#define CLK_TCON		57
+#define CLK_DEINTERLACE		58
+#define CLK_TVE2_CLK		59
+#define CLK_TVE1_CLK		60
+#define CLK_TVD			61
+#define CLK_CSI			62
+#define CLK_VE			63
+#define CLK_CODEC		64
+#define CLK_AVS			65
+
+#endif
diff --git a/include/dt-bindings/reset/suniv-ccu.h b/include/dt-bindings/reset/suniv-ccu.h
new file mode 100644
index 000000000000..993f6b5381df
--- /dev/null
+++ b/include/dt-bindings/reset/suniv-ccu.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2018 Icenowy Zheng <icenowy at aosc.xyz>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#ifndef _DT_BINDINGS_RST_SUNIV_H_
+#define _DT_BINDINGS_RST_SUNIV_H_
+
+#define RST_USB_PHY0		0
+#define RST_BUS_MMC0		1
+#define RST_BUS_MMC1		2
+#define RST_BUS_DRAM		3
+#define RST_BUS_SPI0		4
+#define RST_BUS_SPI1		5
+#define RST_BUS_OTG		6
+#define RST_BUS_VE		7
+#define RST_BUS_LCD		8
+#define RST_BUS_DEINTERLACE		9
+#define RST_BUS_CSI		10
+#define RST_BUS_TVD		11
+#define RST_BUS_TVE		12
+#define RST_BUS_DE_BE		13
+#define RST_BUS_DE_FE		14
+#define RST_BUS_CODEC		15
+#define RST_BUS_SPDIF		16
+#define RST_BUS_IR		17
+#define RST_BUS_RSB		18
+#define RST_BUS_I2S0		19
+#define RST_BUS_I2C0		20
+#define RST_BUS_I2C1		21
+#define RST_BUS_I2C2		22
+#define RST_BUS_UART0		23
+#define RST_BUS_UART1		24
+#define RST_BUS_UART2		25
+
+#endif /* _DT_BINDINGS_RST_SUNIV_H_ */
-- 
2.14.2




More information about the linux-arm-kernel mailing list