[PATCH v3 08/14] ARM: dts: stm32: Add pin map for SDIO controller on stm32f4

patrice.chotard at st.com patrice.chotard at st.com
Thu Jan 18 06:34:24 PST 2018


From: Andrea Merello <andrea.merello at gmail.com>

This patch adds the pin configuration for SDIO controller on
stm32f4.

Signed-off-by: Andrea Merello <andrea.merello at gmail.com>
Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
---

v3: _ none

v2: _ none


 arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
index ae94d86..3520289 100644
--- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
@@ -338,6 +338,37 @@
 					slew-rate = <3>;
 				};
 			};
+
+			sdio_pins: sdio_pins at 0 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
+						 <STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
+						 <STM32_PINMUX('C', 10, AF12)>, /* SDIO_D2 */
+						 <STM32_PINMUX('C', 11, AF12)>, /* SDIO_D3 */
+						 <STM32_PINMUX('C', 12, AF12)>, /* SDIO_CK */
+						 <STM32_PINMUX('D', 2, AF12)>; /* SDIO_CMD */
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			sdio_pins_od: sdio_pins_od at 0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
+						 <STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
+						 <STM32_PINMUX('C', 10, AF12)>, /* SDIO_D2 */
+						 <STM32_PINMUX('C', 11, AF12)>, /* SDIO_D3 */
+						 <STM32_PINMUX('C', 12, AF12)>; /* SDIO_CK */
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+
+				pins2 {
+					pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDIO_CMD */
+					drive-open-drain;
+					slew-rate = <2>;
+				};
+			};
 		};
 	};
 };
-- 
1.9.1




More information about the linux-arm-kernel mailing list