[PATCH v3 05/14] mmc: mmci: Add STM32 variant

[patrice.chotard at st.com]

From: Patrice Chotard <patrice.chotard at st.com>

STM32F4 and STM32F7 MCUs has a SDIO controller that looks like
an ARM PL810.
This patch adds the STM32 variant so that mmci driver supports it.

Signed-off-by: Andrea Merello <andrea.merello at gmail.com>
Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
Reviewed-by: Linus Walleij <linus.walleij at linaro.org>
---

v3: _ none

v2: _ Replace "pl180" by "PL180" in commit message

 drivers/mmc/host/mmci.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 9918a5f..30c93c9 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -244,6 +244,23 @@ struct variant_data {
 	.opendrain		= MCI_OD,
 };
 
+static struct variant_data variant_stm32 = {
+	.fifosize		= 32 * 4,
+	.fifohalfsize		= 8 * 4,
+	.clkreg			= MCI_CLK_ENABLE,
+	.clkreg_enable		= MCI_ST_UX500_HWFCEN,
+	.clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS,
+	.clkreg_neg_edge_enable	= MCI_ST_UX500_NEG_EDGE,
+	.datalength_bits	= 24,
+	.datactrl_mask_sdio	= MCI_DPSM_ST_SDIOEN,
+	.st_sdio		= true,
+	.st_clkdiv		= true,
+	.pwrreg_powerup		= MCI_PWR_ON,
+	.f_max			= 48000000,
+	.pwrreg_clkgate		= true,
+	.pwrreg_nopower		= true,
+};
+
 static struct variant_data variant_qcom = {
 	.fifosize		= 16 * 4,
 	.fifohalfsize		= 8 * 4,
@@ -2021,6 +2038,11 @@ static int mmci_runtime_resume(struct device *dev)
 		.mask   = 0xf0ffffff,
 		.data	= &variant_ux500v2,
 	},
+	{
+		.id     = 0x00880180,
+		.mask   = 0x00ffffff,
+		.data	= &variant_stm32,
+	},
 	/* Qualcomm variants */
 	{
 		.id     = 0x00051180,
-- 
1.9.1