[PATCH v2 13/16] ARM: dts: r8a7794: consistently use single space after =

[Niklas Söderlund]

Hi Simon,

Thanks for your work.

On 2018-01-17 17:17:14 +0100, Simon Horman wrote:
> Consistently use a single space after a =.
> 
> This patch removes instances where a tab is used instead.
> 
> This patch should not introduce any functional change.
> 
> Signed-off-by: Simon Horman <horms+renesas at verge.net.au>

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas at ragnatech.se>

> ---
> v2
> * New patch
> ---
>  arch/arm/boot/dts/r8a7794.dtsi | 38 +++++++++++++++++++-------------------
>  1 file changed, 19 insertions(+), 19 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
> index 106b4e1649ff..79263377ded3 100644
> --- a/arch/arm/boot/dts/r8a7794.dtsi
> +++ b/arch/arm/boot/dts/r8a7794.dtsi
> @@ -319,20 +319,20 @@
>  	audma0: dma-controller at ec700000 {
>  		compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac";
>  		reg = <0 0xec700000 0 0x10000>;
> -		interrupts =	<GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
> -				 GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
> -				 GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
> -				 GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
> -				 GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
> -				 GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
> -				 GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
> -				 GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
> -				 GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
> -				 GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
> -				 GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
> -				 GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
> -				 GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
> -				 GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
> +			      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
> +			      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
> +			      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
> +			      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
> +			      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
> +			      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
> +			      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
> +			      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
> +			      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
> +			      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
> +			      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
> +			      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
> +			      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
>  		interrupt-names = "error",
>  				  "ch0", "ch1", "ch2", "ch3", "ch4", "ch5",
>  				  "ch6", "ch7", "ch8", "ch9", "ch10", "ch11",
> @@ -1186,11 +1186,11 @@
>  		 */
>  		compatible = "renesas,rcar_sound-r8a7794",
>  			     "renesas,rcar_sound-gen2";
> -		reg =	<0 0xec500000 0 0x1000>, /* SCU */
> -			<0 0xec5a0000 0 0x100>,  /* ADG */
> -			<0 0xec540000 0 0x1000>, /* SSIU */
> -			<0 0xec541000 0 0x280>,  /* SSI */
> -			<0 0xec740000 0 0x200>;  /* Audio DMAC peri peri */
> +		reg = <0 0xec500000 0 0x1000>, /* SCU */
> +		      <0 0xec5a0000 0 0x100>,  /* ADG */
> +		      <0 0xec540000 0 0x1000>, /* SSIU */
> +		      <0 0xec541000 0 0x280>,  /* SSI */
> +		      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri */
>  		reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
>  
>  		clocks = <&cpg CPG_MOD 1005>,
> -- 
> 2.11.0
> 

-- 
Regards,
Niklas Söderlund