[PATCH v2 12/16] ARM: dts: r8a7793: sort subnodes of root node

[Niklas Söderlund]

Hi Simon,

Thanks for your patch.

On 2018-01-17 17:17:13 +0100, Simon Horman wrote:
> Sort the subnodes of the soc node to improve maintainability.
> The sort key is the address on the bus with instances of the same
> IP block grouped together.
> 
> This patch should not introduce any functional change.
> 
> Signed-off-by: Simon Horman <horms+renesas at verge.net.au>

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas at ragnatech.se>

> ---
> v2
> * New patch
> ---
>  arch/arm/boot/dts/r8a7793.dtsi | 90 +++++++++++++++++++++---------------------
>  1 file changed, 45 insertions(+), 45 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
> index f2b58a28cee9..aa7d7792fb13 100644
> --- a/arch/arm/boot/dts/r8a7793.dtsi
> +++ b/arch/arm/boot/dts/r8a7793.dtsi
> @@ -31,6 +31,35 @@
>  		spi0 = &qspi;
>  	};
>  
> +	/*
> +	 * The external audio clocks are configured as 0 Hz fixed frequency
> +	 * clocks by default.
> +	 * Boards that provide audio clocks should override them.
> +	 */
> +	audio_clk_a: audio_clk_a {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <0>;
> +	};
> +	audio_clk_b: audio_clk_b {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <0>;
> +	};
> +	audio_clk_c: audio_clk_c {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <0>;
> +	};
> +
> +	/* External CAN clock */
> +	can_clk: can {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		/* This value must be overridden by the board. */
> +		clock-frequency = <0>;
> +	};
> +
>  	cpus {
>  		#address-cells = <1>;
>  		#size-cells = <0>;
> @@ -73,6 +102,22 @@
>  		};
>  	};
>  
> +	/* External root clock */
> +	extal_clk: extal {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		/* This value must be overridden by the board. */
> +		clock-frequency = <0>;
> +	};
> +
> +	/* External SCIF clock */
> +	scif_clk: scif {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		/* This value must be overridden by the board. */
> +		clock-frequency = <0>;
> +	};
> +
>  	soc {
>  		compatible = "simple-bus";
>  		interrupt-parent = <&gic>;
> @@ -1342,55 +1387,10 @@
>  				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
>  	};
>  
> -	/* External root clock */
> -	extal_clk: extal {
> -		compatible = "fixed-clock";
> -		#clock-cells = <0>;
> -		/* This value must be overridden by the board. */
> -		clock-frequency = <0>;
> -	};
> -
> -	/*
> -	 * The external audio clocks are configured as 0 Hz fixed frequency
> -	 * clocks by default.
> -	 * Boards that provide audio clocks should override them.
> -	 */
> -	audio_clk_a: audio_clk_a {
> -		compatible = "fixed-clock";
> -		#clock-cells = <0>;
> -		clock-frequency = <0>;
> -	};
> -	audio_clk_b: audio_clk_b {
> -		compatible = "fixed-clock";
> -		#clock-cells = <0>;
> -		clock-frequency = <0>;
> -	};
> -	audio_clk_c: audio_clk_c {
> -		compatible = "fixed-clock";
> -		#clock-cells = <0>;
> -		clock-frequency = <0>;
> -	};
> -
>  	/* External USB clock - can be overridden by the board */
>  	usb_extal_clk: usb_extal {
>  		compatible = "fixed-clock";
>  		#clock-cells = <0>;
>  		clock-frequency = <48000000>;
>  	};
> -
> -	/* External CAN clock */
> -	can_clk: can {
> -		compatible = "fixed-clock";
> -		#clock-cells = <0>;
> -		/* This value must be overridden by the board. */
> -		clock-frequency = <0>;
> -	};
> -
> -	/* External SCIF clock */
> -	scif_clk: scif {
> -		compatible = "fixed-clock";
> -		#clock-cells = <0>;
> -		/* This value must be overridden by the board. */
> -		clock-frequency = <0>;
> -	};
>  };
> -- 
> 2.11.0
> 

-- 
Regards,
Niklas Söderlund