[PATCH v2 01/16] ARM: dts: r8a7790: consistently use single space after =
Niklas Söderlund
niklas.soderlund at ragnatech.se
Wed Jan 17 16:16:34 PST 2018
Hi Simon,
Thanks for your patch.
On 2018-01-17 17:17:02 +0100, Simon Horman wrote:
> Consistently use a single space after a =.
>
> This patch removes instances where a tab or multiple spaces are used
> instead. It also avoids running over 80 columns in width in one of the
> lines where whitespace is updated.
>
> This patch should not introduce any functional change.
>
> Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas at ragnatech.se>
> ---
> v2
> * Consistently use tabs for indentation as much as possible
> ---
> arch/arm/boot/dts/r8a7790.dtsi | 75 +++++++++++++++++++++---------------------
> 1 file changed, 38 insertions(+), 37 deletions(-)
>
> diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
> index 13926fc7abfa..b4306f7c1bbb 100644
> --- a/arch/arm/boot/dts/r8a7790.dtsi
> +++ b/arch/arm/boot/dts/r8a7790.dtsi
> @@ -291,9 +291,9 @@
> };
>
> thermal: thermal at e61f0000 {
> - compatible = "renesas,thermal-r8a7790",
> - "renesas,rcar-gen2-thermal",
> - "renesas,rcar-thermal";
> + compatible = "renesas,thermal-r8a7790",
> + "renesas,rcar-gen2-thermal",
> + "renesas,rcar-thermal";
> reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
> interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cpg CPG_MOD 522>;
> @@ -423,20 +423,20 @@
> audma0: dma-controller at ec700000 {
> compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
> reg = <0 0xec700000 0 0x10000>;
> - interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "error",
> "ch0", "ch1", "ch2", "ch3",
> "ch4", "ch5", "ch6", "ch7",
> @@ -453,20 +453,20 @@
> audma1: dma-controller at ec720000 {
> compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
> reg = <0 0xec720000 0 0x10000>;
> - interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
> - GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "error",
> "ch0", "ch1", "ch2", "ch3",
> "ch4", "ch5", "ch6", "ch7",
> @@ -1437,12 +1437,13 @@
> * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
> * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
> */
> - compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2";
> - reg = <0 0xec500000 0 0x1000>, /* SCU */
> - <0 0xec5a0000 0 0x100>, /* ADG */
> - <0 0xec540000 0 0x1000>, /* SSIU */
> - <0 0xec541000 0 0x280>, /* SSI */
> - <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
> + compatible = "renesas,rcar_sound-r8a7790",
> + "renesas,rcar_sound-gen2";
> + reg = <0 0xec500000 0 0x1000>, /* SCU */
> + <0 0xec5a0000 0 0x100>, /* ADG */
> + <0 0xec540000 0 0x1000>, /* SSIU */
> + <0 0xec541000 0 0x280>, /* SSI */
> + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
> reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
>
> clocks = <&cpg CPG_MOD 1005>,
> --
> 2.11.0
>
--
Regards,
Niklas Söderlund
More information about the linux-arm-kernel
mailing list