[PATCH] net: fec: add necessary defines to work on ARM64
Lucas Stach
l.stach at pengutronix.de
Wed Jan 17 10:30:55 PST 2018
The i.MX8 is a ARMv8 based SoC, that uses the same FEC IP as the
earlier, ARMv7 based, i.MX SoCs. Allow the driver to work on ARM64.
Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
drivers/net/ethernet/freescale/fec.h | 5 +++--
drivers/net/ethernet/freescale/fec_main.c | 8 +++++---
2 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h
index 5385074b3b7d..e7381f8ef89d 100644
--- a/drivers/net/ethernet/freescale/fec.h
+++ b/drivers/net/ethernet/freescale/fec.h
@@ -20,7 +20,8 @@
#include <linux/timecounter.h>
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
- defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM)
+ defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM) || \
+ defined(CONFIG_ARM64)
/*
* Just figures, Motorola would have to change the offsets for
* registers in the same peripheral device on different models
@@ -195,7 +196,7 @@
* Evidently, ARM SoCs have the FEC block generated in a
* little endian mode so adjust endianness accordingly.
*/
-#if defined(CONFIG_ARM)
+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
#define fec32_to_cpu le32_to_cpu
#define fec16_to_cpu le16_to_cpu
#define cpu_to_fec32 cpu_to_le32
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index a74300a4459c..45eed37373a9 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -195,7 +195,8 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address");
* account when setting it.
*/
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
- defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM)
+ defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM) || \
+ defined(CONFIG_ARM64)
#define OPT_FRAME_SIZE (PKT_MAXBUF_SIZE << 16)
#else
#define OPT_FRAME_SIZE 0
@@ -2107,7 +2108,8 @@ static int fec_enet_get_regs_len(struct net_device *ndev)
/* List of registers that can be safety be read to dump them with ethtool */
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
- defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM)
+ defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM) || \
+ defined(CONFIG_ARM64)
static u32 fec_enet_register_offset[] = {
FEC_IEVENT, FEC_IMASK, FEC_R_DES_ACTIVE_0, FEC_X_DES_ACTIVE_0,
FEC_ECNTRL, FEC_MII_DATA, FEC_MII_SPEED, FEC_MIB_CTRLSTAT, FEC_R_CNTRL,
@@ -3119,7 +3121,7 @@ static int fec_enet_init(struct net_device *ndev)
unsigned dsize_log2 = __fls(dsize);
WARN_ON(dsize != (1 << dsize_log2));
-#if defined(CONFIG_ARM)
+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
fep->rx_align = 0xf;
fep->tx_align = 0xf;
#else
--
2.11.0
More information about the linux-arm-kernel
mailing list