[PATCH v2 6/6] arm64: Add support for pseudo-NMIs
Julien Thierry
julien.thierry at arm.com
Wed Jan 17 03:54:44 PST 2018
arm64 does not provide native NMIs. Emulate the NMI behaviour using GIC
priorities.
Add the possibility to set an IRQ as an NMI and the handling of the NMI.
If the view of GIC priorities is the secure one (i.e. SCR_EL3.FIQ == 0), do
not allow the use of NMIs. Emit a warning when attempting to set an IRQ as
NMI under this scenario.
Signed-off-by: Julien Thierry <julien.thierry at arm.com>
Cc: Catalin Marinas <catalin.marinas at arm.com>
Cc: Will Deacon <will.deacon at arm.com>
Cc: Thomas Gleixner <tglx at linutronix.de>
Cc: Jason Cooper <jason at lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier at arm.com>
Cc: Mark Rutland <mark.rutland at arm.com>
---
arch/arm64/kernel/entry.S | 56 +++++++++++++++++
drivers/irqchip/irq-gic-v3.c | 141 +++++++++++++++++++++++++++++++++++++++++++
include/linux/interrupt.h | 1 +
3 files changed, 198 insertions(+)
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 8209b45..170215c 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -355,6 +355,18 @@ alternative_else_nop_endif
mov sp, x19
.endm
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+ /* Should be checked on return from irq handlers */
+ .macro branch_if_was_nmi, tmp, target
+ alternative_if ARM64_HAS_SYSREG_GIC_CPUIF
+ mrs \tmp, daif
+ alternative_else
+ mov \tmp, #0
+ alternative_endif
+ tbnz \tmp, #7, \target // Exiting an NMI
+ .endm
+#endif
+
/*
* These are the registers used in the syscall handler, and allow us to
* have in theory up to 7 arguments to a function - x0 to x6.
@@ -574,12 +586,30 @@ ENDPROC(el1_sync)
el1_irq:
kernel_entry 1
enable_da_f
+
#ifdef CONFIG_TRACE_IRQFLAGS
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+ ldr x20, [sp, #S_PMR_SAVE]
+ /* Irqs were disabled, don't trace */
+ tbz x20, ICC_PMR_EL1_EN_SHIFT, 1f
+#endif
bl trace_hardirqs_off
+1:
#endif
irq_handler
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+ /*
+ * Irqs were disabled, we have an nmi.
+ * We might have interrupted a context with interrupt disabled that set
+ * NEED_RESCHED flag.
+ * Skip preemption and irq tracing if needed.
+ */
+ tbz x20, ICC_PMR_EL1_EN_SHIFT, untraced_irq_exit
+ branch_if_was_nmi x0, skip_preempt
+#endif
+
#ifdef CONFIG_PREEMPT
ldr w24, [tsk, #TSK_TI_PREEMPT] // get preempt count
cbnz w24, 1f // preempt count != 0
@@ -588,9 +618,13 @@ el1_irq:
bl el1_preempt
1:
#endif
+
+skip_preempt:
#ifdef CONFIG_TRACE_IRQFLAGS
bl trace_hardirqs_on
#endif
+
+untraced_irq_exit:
kernel_exit 1
ENDPROC(el1_irq)
@@ -810,6 +844,11 @@ el0_irq_naked:
#ifdef CONFIG_TRACE_IRQFLAGS
bl trace_hardirqs_on
#endif
+
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+ branch_if_was_nmi x2, nmi_ret_to_user
+#endif
+
b ret_to_user
ENDPROC(el0_irq)
@@ -1000,8 +1039,15 @@ ENTRY(cpu_switch_to)
ldp x27, x28, [x8], #16
ldp x29, x9, [x8], #16
ldr lr, [x8]
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+ mrs x10, daif
+ msr daifset, #2
+#endif
mov sp, x9
msr sp_el0, x1
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+ msr daif, x10
+#endif
ret
ENDPROC(cpu_switch_to)
NOKPROBE(cpu_switch_to)
@@ -1018,3 +1064,13 @@ ENTRY(ret_from_fork)
b ret_to_user
ENDPROC(ret_from_fork)
NOKPROBE(ret_from_fork)
+
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+/*
+ * NMI return path to EL0
+ */
+nmi_ret_to_user:
+ ldr x1, [tsk, #TSK_TI_FLAGS]
+ b finish_ret_to_user
+ENDPROC(nmi_ret_to_user)
+#endif
diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 58b5e89..8d348f9 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -34,6 +34,8 @@
#include <linux/irqchip/arm-gic-v3.h>
#include <linux/irqchip/irq-partition-percpu.h>
+#include <trace/events/irq.h>
+
#include <asm/cputype.h>
#include <asm/exception.h>
#include <asm/smp_plat.h>
@@ -41,6 +43,8 @@
#include "irq-gic-common.h"
+#define GICD_INT_NMI_PRI 0xa0
+
struct redist_region {
void __iomem *redist_base;
phys_addr_t phys_base;
@@ -227,6 +231,87 @@ static void gic_unmask_irq(struct irq_data *d)
gic_poke_irq(d, GICD_ISENABLER);
}
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+/*
+ * Chip flow handler for SPIs set as NMI
+ */
+static void handle_fasteoi_nmi(struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct irqaction *action = desc->action;
+ unsigned int irq = irq_desc_get_irq(desc);
+ irqreturn_t res;
+
+ if (chip->irq_ack)
+ chip->irq_ack(&desc->irq_data);
+
+ trace_irq_handler_entry(irq, action);
+ res = action->handler(irq, action->dev_id);
+ trace_irq_handler_exit(irq, action, res);
+
+ if (chip->irq_eoi)
+ chip->irq_eoi(&desc->irq_data);
+}
+
+/*
+ * Chip flow handler for PPIs set as NMI
+ */
+static void handle_percpu_devid_nmi(struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct irqaction *action = desc->action;
+ unsigned int irq = irq_desc_get_irq(desc);
+ irqreturn_t res;
+
+ if (chip->irq_ack)
+ chip->irq_ack(&desc->irq_data);
+
+ trace_irq_handler_entry(irq, action);
+ res = action->handler(irq, raw_cpu_ptr(action->percpu_dev_id));
+ trace_irq_handler_exit(irq, action, res);
+
+ if (chip->irq_eoi)
+ chip->irq_eoi(&desc->irq_data);
+}
+
+static int gic_irq_set_irqchip_prio(struct irq_data *d, bool val)
+{
+ u8 prio;
+ irq_flow_handler_t handler;
+
+ if (gic_peek_irq(d, GICD_ISENABLER)) {
+ pr_err("Cannot set NMI property of enabled IRQ %u\n", d->irq);
+ return -EPERM;
+ }
+
+ if (val) {
+ prio = GICD_INT_NMI_PRI;
+
+ if (gic_irq(d) < 32)
+ handler = handle_percpu_devid_nmi;
+ else
+ handler = handle_fasteoi_nmi;
+ } else {
+ prio = GICD_INT_DEF_PRI;
+
+ if (gic_irq(d) < 32)
+ handler = handle_percpu_devid_irq;
+ else
+ handler = handle_fasteoi_irq;
+ }
+
+ /*
+ * Already in a locked context for the desc from calling
+ * irq_set_irq_chip_state.
+ * It should be safe to simply modify the handler.
+ */
+ irq_to_desc(d->irq)->handle_irq = handler;
+ gic_set_irq_prio(gic_irq(d), gic_dist_base(d), prio);
+
+ return 0;
+}
+#endif
+
static int gic_irq_set_irqchip_state(struct irq_data *d,
enum irqchip_irq_state which, bool val)
{
@@ -248,6 +333,18 @@ static int gic_irq_set_irqchip_state(struct irq_data *d,
reg = val ? GICD_ICENABLER : GICD_ISENABLER;
break;
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+ case IRQCHIP_STATE_NMI:
+ if (static_branch_likely(&have_non_secure_prio_view)) {
+ return gic_irq_set_irqchip_prio(d, val);
+ } else if (val) {
+ pr_warn("Failed to set IRQ %u as NMI, NMIs are unsupported\n",
+ gic_irq(d));
+ return -EINVAL;
+ }
+ return 0;
+#endif
+
default:
return -EINVAL;
}
@@ -275,6 +372,13 @@ static int gic_irq_get_irqchip_state(struct irq_data *d,
*val = !gic_peek_irq(d, GICD_ISENABLER);
break;
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+ case IRQCHIP_STATE_NMI:
+ *val = (gic_get_irq_prio(gic_irq(d), gic_dist_base(d)) ==
+ GICD_INT_NMI_PRI);
+ break;
+#endif
+
default:
return -EINVAL;
}
@@ -345,6 +449,22 @@ static u64 gic_mpidr_to_affinity(unsigned long mpidr)
return aff;
}
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+static void do_handle_nmi(unsigned int hwirq, struct pt_regs *regs)
+{
+ struct pt_regs *old_regs = set_irq_regs(regs);
+ unsigned int irq;
+
+ nmi_enter();
+
+ irq = irq_find_mapping(gic_data.domain, hwirq);
+ generic_handle_irq(irq);
+
+ nmi_exit();
+ set_irq_regs(old_regs);
+}
+#endif
+
static asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
{
u32 irqnr;
@@ -360,6 +480,25 @@ static asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs
if (likely(irqnr > 15 && irqnr < 1020) || irqnr >= 8192) {
int err;
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+ if (static_branch_likely(&have_non_secure_prio_view)
+ && unlikely(gic_read_rpr() == GICD_INT_NMI_PRI)) {
+ /*
+ * We need to prevent other NMIs to occur even after a
+ * priority drop.
+ * We keep I flag set until cpsr is restored from
+ * kernel_exit.
+ */
+ arch_irqs_daif_disable();
+
+ if (static_key_true(&supports_deactivate))
+ gic_write_eoir(irqnr);
+
+ do_handle_nmi(irqnr, regs);
+ return;
+ }
+#endif
+
if (static_key_true(&supports_deactivate))
gic_write_eoir(irqnr);
else {
@@ -1057,6 +1196,8 @@ static void __init gic_detect_prio_view(void)
if (gic_read_rpr() == gic_get_irq_prio(acked_irqnr,
rdist_base))
static_branch_enable(&have_non_secure_prio_view);
+ else
+ pr_warn("Cannot enable use of pseudo-NMIs\n");
} else {
pr_warn("Unexpected IRQ for priority detection: %u\n",
acked_irqnr);
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 69c2382..cdcefe4 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -421,6 +421,7 @@ enum irqchip_irq_state {
IRQCHIP_STATE_ACTIVE, /* Is interrupt in progress? */
IRQCHIP_STATE_MASKED, /* Is interrupt masked? */
IRQCHIP_STATE_LINE_LEVEL, /* Is IRQ line high? */
+ IRQCHIP_STATE_NMI, /* Is IRQ an NMI? */
};
extern int irq_get_irqchip_state(unsigned int irq, enum irqchip_irq_state which,
--
1.9.1
More information about the linux-arm-kernel
mailing list