[PATCH v2 07/15] ARM: dts: stm32: Add SDIO controller for stm32f429
patrice.chotard at st.com
patrice.chotard at st.com
Tue Jan 16 04:30:51 PST 2018
From: Patrice Chotard <patrice.chotard at st.com>
stm32f429 embeds ARM_PL180 sdi IP, adds SDIO controller
node to allow MMC support.
Signed-off-by: Andrea Merello <andrea.merello at gmail.com>
Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
---
v2 _ none
arch/arm/boot/dts/stm32f429.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 10099df..ede77e0 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -511,6 +511,17 @@
};
};
+ sdio: sdio at 40012c00 {
+ compatible = "arm,pl180", "arm,primecell";
+ arm,primecell-periphid = <0x00880180>;
+ reg = <0x40012c00 0x400>;
+ clocks = <&rcc 0 STM32F4_APB2_CLOCK(SDIO)>;
+ clock-names = "apb_pclk";
+ interrupts = <49>;
+ max-frequency = <48000000>;
+ status = "disabled";
+ };
+
syscfg: system-config at 40013800 {
compatible = "syscon";
reg = <0x40013800 0x400>;
--
1.9.1
More information about the linux-arm-kernel
mailing list