[PATCH 1/2 v2] ARM: dts: Add Aspeed SoC USB controllers to device-tree

Joel Stanley joel at jms.id.au
Mon Jan 15 07:33:05 PST 2018


On Thu, Jan 11, 2018 at 10:21 PM, Benjamin Herrenschmidt
<benh at kernel.crashing.org> wrote:
> This adds the USB controllers to the DT template of the
> AST24xx and AST25xx SoCs.
>
> This patch doesn't enable them by default on any board specific
> .dts yet. This will be done when we have the necessary clock/reset
> and pinmux support. In the meantime though, this will work if
> u-boot configures things properly.
>
> For the AST2400 I only added pinmux definition for port 1
> which is dual USB1/USB2. There are additional USB1 only ports
> that might require more work but I don't have HW to test at
> hand so I'm leaving that to whoever cares.
>
> Signed-off-by: Benjamin Herrenschmidt <benh at kernel.crashing.org>

Andrew, can you check the pinmux stuff for us please?

The other parts look good.

Cheers,

Joel

> ---
>
> v2: Previous patch was missing actually adding the nodes
>     (which was an old patch in my tree I had forgotten to
>     merge).
>
>  arch/arm/boot/dts/aspeed-g4.dtsi | 27 +++++++++++++++++++++++++++
>  arch/arm/boot/dts/aspeed-g5.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 67 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
> index b0d8431a3700..e55f2ad5de59 100644
> --- a/arch/arm/boot/dts/aspeed-g4.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g4.dtsi
> @@ -103,6 +103,23 @@
>                         status = "disabled";
>                 };
>
> +               ehci0: usb at 1e6a1000 {
> +                       compatible = "aspeed,ast2400-ehci", "generic-ehci";
> +                       reg = <0x1e6a1000 0x100>;
> +                       interrupts = <5>;
> +                       clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
> +                       status = "disabled";
> +               };
> +
> +               uhci: usb at 1e6b0000 {
> +                       compatible = "aspeed,ast2400-uhci", "generic-uhci";
> +                       reg = <0x1e6b0000 0x100>;
> +                       interrupts = <14>;
> +                       #ports = <3>;
> +                       clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
> +                       status = "disabled";
> +               };
> +
>                 apb {
>                         compatible = "simple-bus";
>                         #address-cells = <1>;
> @@ -1227,6 +1244,16 @@
>                 groups = "USBCKI";
>         };
>
> +       pinctrl_usb2h_default: usb2h_default {
> +               function = "USB2H1";
> +               groups = "USB2H1";
> +       };
> +
> +       pinctrl_usb2d_default: usb2d_default {
> +               function = "USB2D1";
> +               groups = "USB2D1";
> +       };
> +
>         pinctrl_vgabios_rom_default: vgabios_rom_default {
>                 function = "VGABIOS_ROM";
>                 groups = "VGABIOS_ROM";
> diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
> index 40de3b66c33f..655258edee24 100644
> --- a/arch/arm/boot/dts/aspeed-g5.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g5.dtsi
> @@ -138,6 +138,31 @@
>                         status = "disabled";
>                 };
>
> +               ehci0: usb at 1e6a1000 {
> +                       compatible = "aspeed,ast2500-ehci", "generic-ehci";
> +                       reg = <0x1e6a1000 0x100>;
> +                       interrupts = <5>;
> +                       clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
> +                       status = "disabled";
> +               };
> +
> +               ehci1: usb at 1e6a3000 {
> +                       compatible = "aspeed,ast2500-ehci", "generic-ehci";
> +                       reg = <0x1e6a3000 0x100>;
> +                       interrupts = <13>;
> +                       clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
> +                       status = "disabled";
> +               };
> +
> +               uhci: usb at 1e6b0000 {
> +                       compatible = "aspeed,ast2500-uhci", "generic-uhci";
> +                       reg = <0x1e6b0000 0x100>;
> +                       interrupts = <14>;
> +                       #ports = <2>;
> +                       clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
> +                       status = "disabled";
> +               };
> +
>                 apb {
>                         compatible = "simple-bus";
>                         #address-cells = <1>;
> @@ -1358,6 +1383,21 @@
>                 groups = "USBCKI";
>         };
>
> +       pinctrl_usb2ah_default: usb2ah_default {
> +               function = "USB2AH";
> +               groups = "USB2AH";
> +       };
> +
> +       pinctrl_usb11bhid_default: usb11bhid_default {
> +               function = "USB11BHID";
> +               groups = "USB11BHID";
> +       };
> +
> +       pinctrl_usb2bh_default: usb2bh_default {
> +               function = "USB2BH";
> +               groups = "USB2BH";
> +       };
> +
>         pinctrl_vgabiosrom_default: vgabiosrom_default {
>                 function = "VGABIOSROM";
>                 groups = "VGABIOSROM";
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel



More information about the linux-arm-kernel mailing list