[PATCH v2 04/12] drm/bridge/synopsys: dw-hdmi: Export some PHY related functions

[Neil Armstrong]

On 12/01/2018 21:42, Jernej Škrabec wrote:
> Hi all,
> 
> Dne sreda, 10. januar 2018 ob 20:25:04 CET je Jernej Skrabec napisal(a):
>> Parts of PHY code could be useful also for custom PHYs. For example,
>> Allwinner A83T has custom PHY which is probably Synopsys gen2 PHY
>> with few additional memory mapped registers, so most of the Synopsys PHY
>> related code could be reused.
>>
>> Functions exported here are actually not specific to Synopsys PHYs but
>> to DWC HDMI controller PHY interface. This means that even if the PHY is
>> completely custom, i.e. not designed by Synopsys, exported functions can
>> be useful.
>>
>> Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
>> ---
>>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 44
>> +++++++++++++++++++++---------- include/drm/bridge/dw_hdmi.h              |
>> 11 ++++++++
>>  2 files changed, 41 insertions(+), 14 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index
>> 7ca14d7325b5..7d80f4b56683 100644
>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> @@ -1037,19 +1037,21 @@ static void dw_hdmi_phy_enable_svsret(struct dw_hdmi
>> *hdmi, u8 enable) HDMI_PHY_CONF0_SVSRET_MASK);
>>  }
>>
>> -static void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable)
>> +void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable)
>>  {
>>  	hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
>>  			 HDMI_PHY_CONF0_GEN2_PDDQ_OFFSET,
>>  			 HDMI_PHY_CONF0_GEN2_PDDQ_MASK);
>>  }
>> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_pddq);
>>
>> -static void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable)
>> +void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable)
>>  {
>>  	hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
>>  			 HDMI_PHY_CONF0_GEN2_TXPWRON_OFFSET,
>>  			 HDMI_PHY_CONF0_GEN2_TXPWRON_MASK);
>>  }
>> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_txpwron);
>>
>>  static void dw_hdmi_phy_sel_data_en_pol(struct dw_hdmi *hdmi, u8 enable)
>>  {
>> @@ -1065,6 +1067,22 @@ static void dw_hdmi_phy_sel_interface_control(struct
>> dw_hdmi *hdmi, u8 enable) HDMI_PHY_CONF0_SELDIPIF_MASK);
>>  }
>>
>> +void dw_hdmi_phy_reset(struct dw_hdmi *hdmi)
>> +{
>> +	/* PHY reset. The reset signal is active high on Gen2 PHYs. */
>> +	hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_PHYRSTZ, HDMI_MC_PHYRSTZ);
>> +	hdmi_writeb(hdmi, 0, HDMI_MC_PHYRSTZ);
>> +}
>> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_reset);
> 
> I just noticed that meson dw hdmi driver uses function with the same name, 
> which break compilation. Is it ok if I rename meson specific reset to 
> meson_dw_hdmi_phy_reset()?

Hi Jernej,

Yes,

Neil

> 
> Best regards,
> Jernej
> 
[...]