PM regression in next

[Kuninori Morimoto]

Hi all

> > > Most devices have one regmap per device which can be retrieved with
> > > dev_get_regmap(), it's the attempt to use that which I suspect is
> > > broken.  Like I said snd_soc_codec_init_regmap() ought to fix things if
> > > that's the issue.
> 
> > OK. Adding Peter to loop as it's his driver after all. Not sure
> > how well mixing regmap register access to the same module with
> > cached twl4030_read() would work :)
> 
> Yes, that local cache is not a super good idea any more and hopefully
> redundant.
> 
> > Maybe there should also be some big warning happening if
> > snd_soc_codec_init_regmap() is now needed and no regmap is
> > found?
> 
> Some devices just plain don't have registers at all (perhaps GPIOs or
> just stub drivers providing capability information).  However we should
> be screaming loudly about the fact that the I/O we tried to do fails,
> that clearly shouldn't be being ignored.

I'm sorry that my patch breaks your drivers.
It seems removing .read/.write callback was too much aggressive.
I hope your driver will be OK by using regmap.
In worst case, we can back .read/.write, but it will be component driver side.

Best regards
---
Kuninori Morimoto