[PATCH v3 24/41] KVM: arm64: Change 32-bit handling of VM system registers

Christoffer Dall christoffer.dall at linaro.org
Fri Jan 12 04:07:30 PST 2018


We currently handle 32-bit accesses to trapped VM system registers using
the 32-bit index into the coproc array on the vcpu structure, which is a
union of the coproc array and the sysreg array.

Since all the 32-bit coproc indices are created to correspond to the
architectural mapping between 64-bit system registers and 32-bit
coprocessor registers, and because the AArch64 system registers are the
double in size of the AArch32 coprocessor registers, we can always find
the system register entry that we must update by dividing the 32-bit
coproc index by 2.

This is going to make our lives much easier when we have to start
accessing system registers that use deferred save/restore and might
have to be read directly from the physical CPU.

Reviewed-by: Andrew Jones <drjones at redhat.com>
Reviewed-by: Marc Zyngier <marc.zyngier at arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall at linaro.org>
---
 arch/arm64/include/asm/kvm_host.h |  8 --------
 arch/arm64/kvm/sys_regs.c         | 20 +++++++++++++++-----
 2 files changed, 15 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 9e23bc968668..4a1b0bab6baf 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -292,14 +292,6 @@ struct kvm_vcpu_arch {
 #define vcpu_cp14(v,r)		((v)->arch.ctxt.copro[(r)])
 #define vcpu_cp15(v,r)		((v)->arch.ctxt.copro[(r)])
 
-#ifdef CONFIG_CPU_BIG_ENDIAN
-#define vcpu_cp15_64_high(v,r)	vcpu_cp15((v),(r))
-#define vcpu_cp15_64_low(v,r)	vcpu_cp15((v),(r) + 1)
-#else
-#define vcpu_cp15_64_high(v,r)	vcpu_cp15((v),(r) + 1)
-#define vcpu_cp15_64_low(v,r)	vcpu_cp15((v),(r))
-#endif
-
 struct kvm_vm_stat {
 	ulong remote_tlb_flush;
 };
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 1830ebc227d1..b20c26e0d6b9 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -121,16 +121,26 @@ static bool access_vm_reg(struct kvm_vcpu *vcpu,
 			  const struct sys_reg_desc *r)
 {
 	bool was_enabled = vcpu_has_cache_enabled(vcpu);
+	u64 val;
+	int reg = r->reg;
 
 	BUG_ON(!p->is_write);
 
-	if (!p->is_aarch32) {
-		vcpu_sys_reg(vcpu, r->reg) = p->regval;
+	/* See the 32bit mapping in kvm_host.h */
+	if (p->is_aarch32)
+		reg = r->reg / 2;
+
+	if (!p->is_aarch32 || !p->is_32bit) {
+		val = p->regval;
 	} else {
-		if (!p->is_32bit)
-			vcpu_cp15_64_high(vcpu, r->reg) = upper_32_bits(p->regval);
-		vcpu_cp15_64_low(vcpu, r->reg) = lower_32_bits(p->regval);
+		val = vcpu_sys_reg(vcpu, reg);
+		if (r->reg % 2)
+			val = (p->regval << 32) | (u64)lower_32_bits(val);
+		else
+			val = ((u64)upper_32_bits(val) << 32) |
+				lower_32_bits(p->regval);
 	}
+	vcpu_sys_reg(vcpu, reg) = val;
 
 	kvm_toggle_cache(vcpu, was_enabled);
 	return true;
-- 
2.14.2




More information about the linux-arm-kernel mailing list