[PATCH 3/4 v7] drm/bridge: Add timing support to dumb VGA DAC

[Archit Taneja]

On 01/12/2018 01:18 PM, Linus Walleij wrote:
> This extends the dumb VGA DAC bridge to handle the THS8134A
> and THS8134B VGA DACs in addition to those already handled.
> 
> We assign the proper timing data to the pointer inside the
> bridge struct so display controllers that need to align their
> timings to the bridge can pick it up and work from there.

queued to drm-misc-next.

Thanks,
Archit

> 
> Cc: Bartosz Golaszewski <bgolaszewski at baylibre.com>
> Cc: Maxime Ripard <maxime.ripard at free-electrons.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
> ---
> ChangeLog v5->v6:
> - Use DRM_BUS_FLAG_PIXDATA_[POS|NEG]EDGE to indicate
>    the sampling edge of the clock signal.
> - Skip intermediate variable for timings.
> - Leave timings as NULL for really dumb VGA DACs.
> - Collect Laurent's Review tag.
> ChangeLog v4->v5:
> - Rewrite the support using the new concept of defining
>    fine-granular sampling (setup+hold) timing definitions
>    stored in the bridge timings struct.
> ChangeLog v3->v4:
> - Actually have the code syntactically correct and compiling :(
>    (Kconfig mistake.)
>    (...)
>    AS      usr/initramfs_data.o
>    AR      usr/built-in.o
>    CC      drivers/gpu/drm/bridge/dumb-vga-dac.o
>    AR      drivers/gpu/drm/bridge/built-in.o
>    AR      drivers/gpu/drm/built-in.o
>    AR      drivers/gpu/built-in.o
>    AR      drivers/built-in.o
>    (...)
> ChangeLog v2->v3:
> - Move const specifier.
> - Cut one line of code assigning bus flags.
> - Preserve the "ti,ths8135" compatible for elder device trees.
> ChangeLog v1->v2:
> - Alphabetize includes
> - Use a u32 with the bus polarity flags and just encode the
>    polarity using the DRM define directly.
> - Rename vendor_data to vendor_info.
> - Simplify assignment of the flag as it is just a simple
>    u32 now.
> - Probe all TI variants on the "ti,ths813x" wildcard for now,
>    we only need to know that the device is in this family to
>    set the clock edge flag right.
> ---
>   drivers/gpu/drm/bridge/dumb-vga-dac.c | 59 +++++++++++++++++++++++++++++++++--
>   1 file changed, 56 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> index de5e7dee7ad6..498d5948d1a8 100644
> --- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
> +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> @@ -11,6 +11,7 @@
>    */
>   
>   #include <linux/module.h>
> +#include <linux/of_device.h>
>   #include <linux/of_graph.h>
>   #include <linux/regulator/consumer.h>
>   
> @@ -204,6 +205,7 @@ static int dumb_vga_probe(struct platform_device *pdev)
>   
>   	vga->bridge.funcs = &dumb_vga_bridge_funcs;
>   	vga->bridge.of_node = pdev->dev.of_node;
> +	vga->bridge.timings = of_device_get_match_data(&pdev->dev);
>   
>   	drm_bridge_add(&vga->bridge);
>   
> @@ -222,10 +224,61 @@ static int dumb_vga_remove(struct platform_device *pdev)
>   	return 0;
>   }
>   
> +/*
> + * We assume the ADV7123 DAC is the "default" for historical reasons
> + * Information taken from the ADV7123 datasheet, revision D.
> + * NOTE: the ADV7123EP seems to have other timings and need a new timings
> + * set if used.
> + */
> +static const struct drm_bridge_timings default_dac_timings = {
> +	/* Timing specifications, datasheet page 7 */
> +	.sampling_edge = DRM_BUS_FLAG_PIXDATA_POSEDGE,
> +	.setup_time_ps = 500,
> +	.hold_time_ps = 1500,
> +};
> +
> +/*
> + * Information taken from the THS8134, THS8134A, THS8134B datasheet named
> + * "SLVS205D", dated May 1990, revised March 2000.
> + */
> +static const struct drm_bridge_timings ti_ths8134_dac_timings = {
> +	/* From timing diagram, datasheet page 9 */
> +	.sampling_edge = DRM_BUS_FLAG_PIXDATA_POSEDGE,
> +	/* From datasheet, page 12 */
> +	.setup_time_ps = 3000,
> +	/* I guess this means latched input */
> +	.hold_time_ps = 0,
> +};
> +
> +/*
> + * Information taken from the THS8135 datasheet named "SLAS343B", dated
> + * May 2001, revised April 2013.
> + */
> +static const struct drm_bridge_timings ti_ths8135_dac_timings = {
> +	/* From timing diagram, datasheet page 14 */
> +	.sampling_edge = DRM_BUS_FLAG_PIXDATA_POSEDGE,
> +	/* From datasheet, page 16 */
> +	.setup_time_ps = 2000,
> +	.hold_time_ps = 500,
> +};
> +
>   static const struct of_device_id dumb_vga_match[] = {
> -	{ .compatible = "dumb-vga-dac" },
> -	{ .compatible = "adi,adv7123" },
> -	{ .compatible = "ti,ths8135" },
> +	{
> +		.compatible = "dumb-vga-dac",
> +		.data = NULL,
> +	},
> +	{
> +		.compatible = "adi,adv7123",
> +		.data = &default_dac_timings,
> +	},
> +	{
> +		.compatible = "ti,ths8135",
> +		.data = &ti_ths8135_dac_timings,
> +	},
> +	{
> +		.compatible = "ti,ths8134",
> +		.data = &ti_ths8134_dac_timings,
> +	},
>   	{},
>   };
>   MODULE_DEVICE_TABLE(of, dumb_vga_match);
> 

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project