[PATCH 1/1] ARM: dts: sunxi: Add Olimex A20-SOM204-EVB board

Stefan Mavrodiev stefan at olimex.com
Fri Jan 12 01:01:05 PST 2018 

This is new System-On-Module platform with universal dimm socket for
easy insertation. The EVB board is designed to be universal with
future modules. Product page is located here [1].

There are two dts files - one for base model and another for eMMC variant.

Base features of A20-SOM204 board includes:
	* 1GB DDR3 RAM
	* AXP209 PMU
	* KSZ9031 Gigabit PHY
	* AT24C16 EEPROM
	* Status LED
	* LCD connector
	* GPIO connector

There will be variants with the following options:
	* Second LAN8710A Megabit PHY
	* 16MB SPI Flash memory
	* eMMC card
	* ATECC508 crypto device

The EVB board has:
	* Debug UART
	* MicroSD card connector
	* USB-OTG connector
	* Two USB host
	* RTL8723BS WiFi/BT combo
	* IrDA transceiver/receiver
	* HDMI connector
	* VGA connector
	* Megabit ethernet transceiver
	* Gigabit ethernet transceiver
	* SATA connector
	* CAN driver
	* CSI camera
	* MIC and HP connectors
	* PCIe x4 connector
	* USB3 connector
	* Two UEXT connectors
	* Two user LEDs

Some of the features are multiplexed and cannot be used the same time:
CAN and Megabit PHY. Others are not usable with A20 SoC: PCIe and USB3.

[1] https://www.olimex.com/Products/SOM204/

Signed-off-by: Stefan Mavrodiev <stefan at olimex.com>
---
 arch/arm/boot/dts/Makefile                         |   2 +
 .../boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts  |  70 ++++
 arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts  | 392 +++++++++++++++++++++
 3 files changed, 464 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts
 create mode 100644 arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d0381e9..c890042 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -918,6 +918,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-m3.dtb \
 	sun7i-a20-mk808c.dtb \
 	sun7i-a20-olimex-som-evb.dtb \
+	sun7i-a20-olimex-som204-evb.dtb \
+	sun7i-a20-olimex-som204-evb-emmc.dtb \
 	sun7i-a20-olinuxino-lime.dtb \
 	sun7i-a20-olinuxino-lime2.dtb \
 	sun7i-a20-olinuxino-lime2-emmc.dtb \
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts
new file mode 100644
index 0000000..97c4824
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2018 - Stefan Mavrodiev <stefan at olimex.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20-olimex-som204-evb.dts"
+
+/ {
+	model = "Olimex A20-SOM204-EVB-eMMC";
+	compatible = "olimex,a20-olimex-som204-evb-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: mmc2_pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	emmc: emmc at 0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
new file mode 100644
index 0000000..ec4492b
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
@@ -0,0 +1,392 @@
+/*
+ * Copyright 2018 - Stefan Mavrodiev <stefan at olimex.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Olimex A20-SOM204-EVB";
+	compatible = "olimex,a20-olimex-som204-evb", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart4;
+		serial2 = &uart7;
+		spi0 = &spi1;
+		spi1 = &spi2;
+		ethernet1 = &rtl8723bs;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olimex_som204_evb>;
+
+		stat {
+			label = "a20-som204:green:stat";
+			gpios = <&pio 8 0 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led1 {
+			label = "a20-som204-evb:green:led1";
+			gpios = <&pio 8 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led2 {
+			label = "a20-som204-evb:yellow:led2";
+			gpios = <&pio 8 11 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	mmc2_pwrseq: mmc2_pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+
+	rtl_pwrseq: rtl_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>,
+			      <&pio 1 11 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy3>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_vcc3v3>;
+
+	snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	status = "okay";
+
+	phy3: ethernet-phy at 3 {
+		reg = <3>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic at 34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	eeprom: eeprom at 50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>,
+		    <&ir0_tx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&rtl_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723bs: sdio_wifi at 1 {
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+
+	bt_uart_pins: bt_uart_pins at 0 {
+		pins = "PG6", "PG7", "PG8";
+		function = "uart3";
+	};
+
+	led_pins_olimex_som204_evb: led_pins at 0 {
+		pins = "PI0", "PI10", "PI11";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin at 0 {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin at 0 {
+		pins = "PH5";
+		function = "gpio_in";
+		bias-pull-down;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1300000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pg";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>,
+		    <&spi1_cs0_pins_a>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>,
+		    <&spi2_cs0_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&bt_uart_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>,
+		    <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
-- 
2.7.4

More information about the linux-arm-kernel mailing list