[linux-sunxi] Re: [PATCH v5 2/2] media: V3s: Add support for Allwinner CSI.

[Yong]

Hi Maxime,

On Thu, 11 Jan 2018 14:28:44 +0100
Maxime Ripard <maxime.ripard at free-electrons.com> wrote:

> Hi Yong,
> 
> On Thu, Jan 11, 2018 at 11:06:06AM +0800, Yong Deng wrote:
> > Allwinner V3s SoC features two CSI module. CSI0 is used for MIPI CSI-2
> > interface and CSI1 is used for parallel interface. This is not
> > documented in datasheet but by test and guess.
> > 
> > This patch implement a v4l2 framework driver for it.
> > 
> > Currently, the driver only support the parallel interface. MIPI-CSI2,
> > ISP's support are not included in this patch.
> > 
> > Signed-off-by: Yong Deng <yong.deng at magewell.com>
> 
> I've needed this patch in order to fix a NULL pointer dereference:
> http://code.bulix.org/oz6gmb-257359?raw
> 
> This is needed because while it's ok to have a NULL pointer to
> v4l2_subdev_pad_config when you call the subdev set_fmt with
> V4L2_SUBDEV_FORMAT_ACTIVE, it's not with V4L2_SUBDEV_FORMAT_TRY, and
> sensors will assume taht it's a valid pointer.
> 
> Otherwise,
> Tested-by: Maxime Ripard <maxime.ripard at free-electrons.com>

I revisit some code of subdevs and you are right.

Squash your patch into my driver patch and add your Tested-by in
commit. Is it right?

> 
> -- 
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com
> 
> -- 
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe at googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.


Thanks,
Yong