[PATCH v2 3/3] ARM: dts: mvebu: add sdram controller node to Armada-38x

[Chris Packham]

The Armada-38x uses an SDRAM controller that is compatible with the
Armada-XP. The key difference is the width of the bus (XP is 64/32, 38x
is 32/16). The SDRAM controller registers are the same between the two
SoCs.

Signed-off-by: Chris Packham <chris.packham at alliedtelesis.co.nz>
---
Changes in v2:
- Add label to sdram-controller node

 arch/arm/boot/dts/armada-38x.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 00ff549d4e39..f9008c4ddd7d 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -138,6 +138,11 @@
 			#size-cells = <1>;
 			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
 
+			sdramc: sdramc at 1400 {
+				compatible = "marvell,armada-xp-sdram-controller";
+				reg = <0x1400 0x500>;
+			};
+
 			L2: cache-controller at 8000 {
 				compatible = "arm,pl310-cache";
 				reg = <0x8000 0x1000>;
-- 
2.15.1