[PATCH v3 6/6] coresight: etm4x: Support panic kdump
Mathieu Poirier
mathieu.poirier at linaro.org
Wed Jan 10 07:46:51 PST 2018
On 9 January 2018 at 22:33, Leo Yan <leo.yan at linaro.org> wrote:
> On Tue, Jan 09, 2018 at 01:21:28PM -0700, Mathieu Poirier wrote:
>> On Thu, Dec 21, 2017 at 04:20:15PM +0800, Leo Yan wrote:
>> > ETMv4 hardware information and configuration needs to be saved as
>> > metadata; these metadata should be compatible with tool 'perf' and
>> > can be used for tracing data analysis. ETMv4 usually works as tracer
>> > per CPU, we cannot wait to gather ETM info after the CPU has been panic
>> > and cannot execute dump operations for itself; so should gather
>> > metadata when the corresponding CPU is alive.
>> >
>> > Since values in TRCIDR{0, 1, 2, 8} and TRCAUTHSTATUS are read-only and
>> > won't change at the runtime. Those registers value are filled when
>> > tracers are instantiated.
>> >
>> > The configuration and control registers TRCCONFIGR and TRCTRACEIDR are
>> > dynamically configured, we record their value when enabling coresight
>> > path. When operating from sysFS tracer these two registers are recorded
>> > in etm4_enable_sysfs() and add kdump node into list, and remove the
>> > kdump node in etm4_disable_sysfs(). When operating from perf,
>> > etm_setup_aux() adds all tracers to the dump list and etm4_enable_perf()
>> > is used to record configuration registers and update dump buffer info,
>> > this can avoid unnecessary list addition and deletion operations.
>> > Removal of the tracers from the dump list is done in function
>> > free_event_data().
>> >
>> > Suggested-by: Mathieu Poirier <mathieu.poirier at linaro.org>
>> > Signed-off-by: Leo Yan <leo.yan at linaro.org>
>> > ---
>> > drivers/hwtracing/coresight/coresight-etm-perf.c | 12 +++++++++++-
>> > drivers/hwtracing/coresight/coresight-etm4x.c | 23 +++++++++++++++++++++++
>> > drivers/hwtracing/coresight/coresight-etm4x.h | 15 +++++++++++++++
>> > 3 files changed, 49 insertions(+), 1 deletion(-)
>> >
>> > diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c
>> > index 8a0ad77..fec779b 100644
>> > --- a/drivers/hwtracing/coresight/coresight-etm-perf.c
>> > +++ b/drivers/hwtracing/coresight/coresight-etm-perf.c
>> > @@ -137,6 +137,12 @@ static void free_event_data(struct work_struct *work)
>> > }
>> >
>> > for_each_cpu(cpu, mask) {
>> > + struct coresight_device *csdev;
>> > +
>> > + csdev = per_cpu(csdev_src, cpu);
>> > + if (csdev)
>> > + coresight_kdump_del(csdev);
>> > +
>> > if (!(IS_ERR_OR_NULL(event_data->path[cpu])))
>> > coresight_release_path(event_data->path[cpu]);
>> > }
>> > @@ -195,7 +201,7 @@ static void etm_free_aux(void *data)
>> > static void *etm_setup_aux(int event_cpu, void **pages,
>> > int nr_pages, bool overwrite)
>> > {
>> > - int cpu;
>> > + int cpu, ret;
>> > cpumask_t *mask;
>> > struct coresight_device *sink;
>> > struct etm_event_data *event_data = NULL;
>> > @@ -238,6 +244,10 @@ static void *etm_setup_aux(int event_cpu, void **pages,
>> > event_data->path[cpu] = coresight_build_path(csdev, sink);
>> > if (IS_ERR(event_data->path[cpu]))
>> > goto err;
>> > +
>> > + ret = coresight_kdump_add(csdev, cpu);
>>
>> Aren't you missing the configuration for trcconfigr and trctraceidr?
>
> Ah, should update these two configurations in function
> etm4_enable_perf()?
Looking at what you've done for etm4_enable_sysfs() that is probably a
better choice.
>
>> > + if (ret)
>> > + goto err;
>> > }
>> >
>> > if (!sink_ops(sink)->alloc_buffer)
>> > diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c
>> > index cf364a5..cbde398 100644
>> > --- a/drivers/hwtracing/coresight/coresight-etm4x.c
>> > +++ b/drivers/hwtracing/coresight/coresight-etm4x.c
>> > @@ -258,10 +258,19 @@ static int etm4_enable_perf(struct coresight_device *csdev,
>> > static int etm4_enable_sysfs(struct coresight_device *csdev)
>> > {
>> > struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
>> > + struct etmv4_config *config = &drvdata->config;
>> > + struct etmv4_metadata *metadata = &drvdata->metadata;
>> > int ret;
>> >
>> > spin_lock(&drvdata->spinlock);
>> >
>> > + /* Update meta data and add into kdump list */
>> > + metadata->trcconfigr = config->cfg;
>> > + metadata->trctraceidr = drvdata->trcid;
>> > +
>> > + coresight_kdump_add(csdev, drvdata->cpu);
>> > + coresight_kdump_update(csdev, (char *)metadata, sizeof(*metadata));
>> > +
>> > /*
>> > * Executing etm4_enable_hw on the cpu whose ETM is being enabled
>> > * ensures that register writes occur when cpu is powered.
>> > @@ -384,6 +393,9 @@ static void etm4_disable_sysfs(struct coresight_device *csdev)
>> > */
>> > smp_call_function_single(drvdata->cpu, etm4_disable_hw, drvdata, 1);
>> >
>> > + /* Delete from kdump list */
>> > + coresight_kdump_del(csdev);
>> > +
>> > spin_unlock(&drvdata->spinlock);
>> > cpus_read_unlock();
>> >
>> > @@ -438,6 +450,7 @@ static void etm4_init_arch_data(void *info)
>> > u32 etmidr4;
>> > u32 etmidr5;
>> > struct etmv4_drvdata *drvdata = info;
>> > + struct etmv4_metadata *metadata = &drvdata->metadata;
>> >
>> > /* Make sure all registers are accessible */
>> > etm4_os_unlock(drvdata);
>> > @@ -590,6 +603,16 @@ static void etm4_init_arch_data(void *info)
>> > drvdata->nrseqstate = BMVAL(etmidr5, 25, 27);
>> > /* NUMCNTR, bits[30:28] number of counters available for tracing */
>> > drvdata->nr_cntr = BMVAL(etmidr5, 28, 30);
>> > +
>> > + /* Update metadata */
>> > + metadata->magic = ETM4_METADATA_MAGIC;
>> > + metadata->cpu = drvdata->cpu;
>> > + metadata->trcidr0 = readl_relaxed(drvdata->base + TRCIDR0);
>> > + metadata->trcidr1 = readl_relaxed(drvdata->base + TRCIDR1);
>> > + metadata->trcidr2 = readl_relaxed(drvdata->base + TRCIDR2);
>> > + metadata->trcidr8 = readl_relaxed(drvdata->base + TRCIDR8);
>> > + metadata->trcauthstatus = readl_relaxed(drvdata->base + TRCAUTHSTATUS);
>> > +
>> > CS_LOCK(drvdata->base);
>> > }
>> >
>> > diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h
>> > index b3b5ea7..08dc8b7 100644
>> > --- a/drivers/hwtracing/coresight/coresight-etm4x.h
>> > +++ b/drivers/hwtracing/coresight/coresight-etm4x.h
>> > @@ -198,6 +198,20 @@
>> > #define ETM_EXLEVEL_NS_HYP BIT(14)
>> > #define ETM_EXLEVEL_NS_NA BIT(15)
>> >
>> > +#define ETM4_METADATA_MAGIC 0x4040404040404040ULL
>>
>> This is a duplicate of the magic value found in cs-etm.h but I'm not sure of
>> what we'll do about that. It is probably time to come up
>> with a shared file between the kernel and the perf tools, just like
>> coresight-pmu.h. You can have a stab at it or concentrate on my previous
>> comments for now - it's entirely up to you.
>
> I will do some try for this for changing to use one shared single
> header, if I have no confidence for this I will go back to keep this
> code for new version patch.
Deal.
>
>> > +
>> > +struct etmv4_metadata {
>> > + u64 magic;
>> > + u64 cpu;
>> > + u64 trcconfigr;
>> > + u64 trctraceidr;
>> > + u64 trcidr0;
>> > + u64 trcidr1;
>> > + u64 trcidr2;
>> > + u64 trcidr8;
>> > + u64 trcauthstatus;
>> > +};
>>
>> Same here... This is a duplicate of struct etmv4_drvdata. Again not sure about
>> the best way to handle this. I'll think about it.
>
> Sure, I might check with you when I spin patches for this.
>
> Thanks,
> Leo Yan
>
>> > +
>> > /**
>> > * struct etmv4_config - configuration information related to an ETMv4
>> > * @mode: Controls various modes supported by this ETM.
>> > @@ -393,6 +407,7 @@ struct etmv4_drvdata {
>> > bool atbtrig;
>> > bool lpoverride;
>> > struct etmv4_config config;
>> > + struct etmv4_metadata metadata;
>> > };
>> >
>> > /* Address comparator access types */
>> > --
>> > 2.7.4
>> >
More information about the linux-arm-kernel
mailing list