[PATCH] ARM: imx: Remove epit support
Fabio Estevam
fabio.estevam at nxp.com
Tue Jan 9 07:24:43 PST 2018
Currently there is no user of EPIT, so remove such unused code.
If someone wants to add EPIT support back, then the person needs to
create a proper support into drivers/clocksource/ and add device
tree support, proper bindings, etc.
Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
---
arch/arm/mach-imx/Kconfig | 13 ---
arch/arm/mach-imx/Makefile | 1 -
arch/arm/mach-imx/epit.c | 228 ---------------------------------------------
3 files changed, 242 deletions(-)
delete mode 100644 arch/arm/mach-imx/epit.c
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 782699e..1831319 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -32,18 +32,6 @@ config MXC_DEBUG_BOARD
data/address de-multiplexing and decode, signal level shift,
interrupt control and various board functions.
-config HAVE_EPIT
- bool
-
-config MXC_USE_EPIT
- bool "Use EPIT instead of GPT"
- depends on HAVE_EPIT
- help
- Use EPIT as the system timer on systems that have it. Normally you
- don't have a reason to do so as the EPIT has the same features and
- uses the same clocks as the GPT. Anyway, on some systems the GPT
- may be in use for other purposes.
-
config HAVE_IMX_ANATOP
bool
@@ -85,7 +73,6 @@ config SOC_IMX31
config SOC_IMX35
bool
select ARCH_MXC_IOMUX_V3
- select HAVE_EPIT
select MXC_AVIC
select PINCTRL_IMX35
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 8ff7105..04ba789 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -20,7 +20,6 @@ obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
obj-$(CONFIG_MXC_TZIC) += tzic.o
obj-$(CONFIG_MXC_AVIC) += avic.o
-obj-$(CONFIG_MXC_USE_EPIT) += epit.o
obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
ifeq ($(CONFIG_CPU_IDLE),y)
diff --git a/arch/arm/mach-imx/epit.c b/arch/arm/mach-imx/epit.c
deleted file mode 100644
index fb9a73a..0000000
--- a/arch/arm/mach-imx/epit.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * linux/arch/arm/plat-mxc/epit.c
- *
- * Copyright (C) 2010 Sascha Hauer <s.hauer at pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#define EPITCR 0x00
-#define EPITSR 0x04
-#define EPITLR 0x08
-#define EPITCMPR 0x0c
-#define EPITCNR 0x10
-
-#define EPITCR_EN (1 << 0)
-#define EPITCR_ENMOD (1 << 1)
-#define EPITCR_OCIEN (1 << 2)
-#define EPITCR_RLD (1 << 3)
-#define EPITCR_PRESC(x) (((x) & 0xfff) << 4)
-#define EPITCR_SWR (1 << 16)
-#define EPITCR_IOVW (1 << 17)
-#define EPITCR_DBGEN (1 << 18)
-#define EPITCR_WAITEN (1 << 19)
-#define EPITCR_RES (1 << 20)
-#define EPITCR_STOPEN (1 << 21)
-#define EPITCR_OM_DISCON (0 << 22)
-#define EPITCR_OM_TOGGLE (1 << 22)
-#define EPITCR_OM_CLEAR (2 << 22)
-#define EPITCR_OM_SET (3 << 22)
-#define EPITCR_CLKSRC_OFF (0 << 24)
-#define EPITCR_CLKSRC_PERIPHERAL (1 << 24)
-#define EPITCR_CLKSRC_REF_HIGH (1 << 24)
-#define EPITCR_CLKSRC_REF_LOW (3 << 24)
-
-#define EPITSR_OCIF (1 << 0)
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "hardware.h"
-
-static struct clock_event_device clockevent_epit;
-
-static void __iomem *timer_base;
-
-static inline void epit_irq_disable(void)
-{
- u32 val;
-
- val = imx_readl(timer_base + EPITCR);
- val &= ~EPITCR_OCIEN;
- imx_writel(val, timer_base + EPITCR);
-}
-
-static inline void epit_irq_enable(void)
-{
- u32 val;
-
- val = imx_readl(timer_base + EPITCR);
- val |= EPITCR_OCIEN;
- imx_writel(val, timer_base + EPITCR);
-}
-
-static void epit_irq_acknowledge(void)
-{
- imx_writel(EPITSR_OCIF, timer_base + EPITSR);
-}
-
-static int __init epit_clocksource_init(struct clk *timer_clk)
-{
- unsigned int c = clk_get_rate(timer_clk);
-
- return clocksource_mmio_init(timer_base + EPITCNR, "epit", c, 200, 32,
- clocksource_mmio_readl_down);
-}
-
-/* clock event */
-
-static int epit_set_next_event(unsigned long evt,
- struct clock_event_device *unused)
-{
- unsigned long tcmp;
-
- tcmp = imx_readl(timer_base + EPITCNR);
-
- imx_writel(tcmp - evt, timer_base + EPITCMPR);
-
- return 0;
-}
-
-/* Left event sources disabled, no more interrupts appear */
-static int epit_shutdown(struct clock_event_device *evt)
-{
- unsigned long flags;
-
- /*
- * The timer interrupt generation is disabled at least
- * for enough time to call epit_set_next_event()
- */
- local_irq_save(flags);
-
- /* Disable interrupt in GPT module */
- epit_irq_disable();
-
- /* Clear pending interrupt */
- epit_irq_acknowledge();
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-static int epit_set_oneshot(struct clock_event_device *evt)
-{
- unsigned long flags;
-
- /*
- * The timer interrupt generation is disabled at least
- * for enough time to call epit_set_next_event()
- */
- local_irq_save(flags);
-
- /* Disable interrupt in GPT module */
- epit_irq_disable();
-
- /* Clear pending interrupt, only while switching mode */
- if (!clockevent_state_oneshot(evt))
- epit_irq_acknowledge();
-
- /*
- * Do not put overhead of interrupt enable/disable into
- * epit_set_next_event(), the core has about 4 minutes
- * to call epit_set_next_event() or shutdown clock after
- * mode switching
- */
- epit_irq_enable();
- local_irq_restore(flags);
-
- return 0;
-}
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t epit_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &clockevent_epit;
-
- epit_irq_acknowledge();
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction epit_timer_irq = {
- .name = "i.MX EPIT Timer Tick",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = epit_timer_interrupt,
-};
-
-static struct clock_event_device clockevent_epit = {
- .name = "epit",
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .set_state_shutdown = epit_shutdown,
- .tick_resume = epit_shutdown,
- .set_state_oneshot = epit_set_oneshot,
- .set_next_event = epit_set_next_event,
- .rating = 200,
-};
-
-static int __init epit_clockevent_init(struct clk *timer_clk)
-{
- clockevent_epit.cpumask = cpumask_of(0);
- clockevents_config_and_register(&clockevent_epit,
- clk_get_rate(timer_clk),
- 0x800, 0xfffffffe);
-
- return 0;
-}
-
-void __init epit_timer_init(void __iomem *base, int irq)
-{
- struct clk *timer_clk;
-
- timer_clk = clk_get_sys("imx-epit.0", NULL);
- if (IS_ERR(timer_clk)) {
- pr_err("i.MX epit: unable to get clk\n");
- return;
- }
-
- clk_prepare_enable(timer_clk);
-
- timer_base = base;
-
- /*
- * Initialise to a known state (all timers off, and timing reset)
- */
- imx_writel(0x0, timer_base + EPITCR);
-
- imx_writel(0xffffffff, timer_base + EPITLR);
- imx_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN,
- timer_base + EPITCR);
-
- /* init and register the timer to the framework */
- epit_clocksource_init(timer_clk);
- epit_clockevent_init(timer_clk);
-
- /* Make irqs happen */
- setup_irq(irq, &epit_timer_irq);
-}
--
2.7.4
More information about the linux-arm-kernel
mailing list