[PATCH 3/9] soc: samsung: pmu: Add the PMU data of exynos5433 to support low-power state
Krzysztof Kozlowski
krzk at kernel.org
Tue Jan 9 04:23:56 PST 2018
On Tue, Jan 9, 2018 at 8:59 AM, Chanwoo Choi <cw00.choi at samsung.com> wrote:
> This patch adds the PMU (Power Management Unit) data of exynos5433 SoC
> in order to support the various power modes. Each power mode has
> the different value for reducing the power-consumption.
>
> Signed-off-by: Jonghwa Lee <jonghwa3.lee at samsung.com>
> Signed-off-by: Chanwoo Choi <cw00.choi at samsung.com>
> ---
> arch/arm/mach-exynos/common.h | 2 -
> drivers/soc/samsung/Makefile | 3 +-
> drivers/soc/samsung/exynos-pmu.c | 1 +
> drivers/soc/samsung/exynos-pmu.h | 2 +
> drivers/soc/samsung/exynos5433-pmu.c | 286 ++++++++++++++++++++++++++++
> include/linux/soc/samsung/exynos-regs-pmu.h | 148 ++++++++++++++
> 6 files changed, 439 insertions(+), 3 deletions(-)
> create mode 100644 drivers/soc/samsung/exynos5433-pmu.c
>
> diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
> index 098f84a149a3..afbc143a3d5d 100644
> --- a/arch/arm/mach-exynos/common.h
> +++ b/arch/arm/mach-exynos/common.h
> @@ -125,8 +125,6 @@ enum {
> void exynos_set_boot_flag(unsigned int cpu, unsigned int mode);
> void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode);
>
> -extern u32 exynos_get_eint_wake_mask(void);
> -
This does not look good. Does it compile without warnings on ARMv7 platforms?
> #ifdef CONFIG_PM_SLEEP
> extern void __init exynos_pm_init(void);
> #else
> diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile
> index 29f294baac6e..d2e637339a45 100644
> --- a/drivers/soc/samsung/Makefile
> +++ b/drivers/soc/samsung/Makefile
> @@ -2,5 +2,6 @@
> obj-$(CONFIG_EXYNOS_PMU) += exynos-pmu.o
>
> obj-$(CONFIG_EXYNOS_PMU_ARM_DRIVERS) += exynos3250-pmu.o exynos4-pmu.o \
> - exynos5250-pmu.o exynos5420-pmu.o
> + exynos5250-pmu.o exynos5420-pmu.o \
> + exynos5433-pmu.o
> obj-$(CONFIG_EXYNOS_PM_DOMAINS) += pm_domains.o
> diff --git a/drivers/soc/samsung/exynos-pmu.c b/drivers/soc/samsung/exynos-pmu.c
> index cfc9de518344..7112d7b2749b 100644
> --- a/drivers/soc/samsung/exynos-pmu.c
> +++ b/drivers/soc/samsung/exynos-pmu.c
> @@ -97,6 +97,7 @@ void exynos_sys_powerup_conf(enum sys_powerdown mode)
> .data = exynos_pmu_data_arm_ptr(exynos5420_pmu_data),
> }, {
> .compatible = "samsung,exynos5433-pmu",
> + .data = exynos_pmu_data_arm_ptr(exynos5433_pmu_data),
> },
> { /*sentinel*/ },
> };
> diff --git a/drivers/soc/samsung/exynos-pmu.h b/drivers/soc/samsung/exynos-pmu.h
> index efbaf8929252..895c786a2f4c 100644
> --- a/drivers/soc/samsung/exynos-pmu.h
> +++ b/drivers/soc/samsung/exynos-pmu.h
> @@ -28,6 +28,7 @@ struct exynos_pmu_data {
> };
>
> extern void __iomem *pmu_base_addr;
> +extern u32 exynos_get_eint_wake_mask(void);
>
> #ifdef CONFIG_EXYNOS_PMU_ARM_DRIVERS
> /* list of all exported SoC specific data */
> @@ -36,6 +37,7 @@ struct exynos_pmu_data {
> extern const struct exynos_pmu_data exynos4412_pmu_data;
> extern const struct exynos_pmu_data exynos5250_pmu_data;
> extern const struct exynos_pmu_data exynos5420_pmu_data;
> +extern const struct exynos_pmu_data exynos5433_pmu_data;
> #endif
>
> extern void pmu_raw_writel(u32 val, u32 offset);
> diff --git a/drivers/soc/samsung/exynos5433-pmu.c b/drivers/soc/samsung/exynos5433-pmu.c
> new file mode 100644
> index 000000000000..2571e61522f0
> --- /dev/null
> +++ b/drivers/soc/samsung/exynos5433-pmu.c
> @@ -0,0 +1,286 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Copyright (c) 2018 Samsung Electronics Co., Ltd.
> +// Copyright (c) Jonghwa Lee <jonghwa3.lee at samsung.com>
> +// Copyright (c) Chanwoo Choi <cw00.choi at samsung.com>
Did you want to add here authorship notice or personal copyrights?
> +//
> +// EXYNOS5433 - CPU PMU (Power Management Unit) support
> +
> +#include <linux/soc/samsung/exynos-regs-pmu.h>
> +#include <linux/soc/samsung/exynos-pmu.h>
> +
> +#include "exynos-pmu.h"
> +
> +static struct exynos_pmu_conf exynos5433_pmu_config[] = {
This should be also const.
> + /* { .offset = address, .val = { AFTR, LPA, SLEEP } } */
> + { EXYNOS5433_ATLAS_CPU0_SYS_PWR_REG, { 0x0, 0x0, 0x8 } },
> + { EXYNOS5433_DIS_IRQ_ATLAS_CPU0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0 } },
> + { EXYNOS5433_ATLAS_CPU1_SYS_PWR_REG, { 0x0, 0x0, 0x8 } },
> + { EXYNOS5433_DIS_IRQ_ATLAS_CPU1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0 } },
> + { EXYNOS5433_ATLAS_CPU2_SYS_PWR_REG, { 0x0, 0x0, 0x8 } },
> + { EXYNOS5433_DIS_IRQ_ATLAS_CPU2_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0 } },
> + { EXYNOS5433_ATLAS_CPU3_SYS_PWR_REG, { 0x0, 0x0, 0x8 } },
> + { EXYNOS5433_DIS_IRQ_ATLAS_CPU3_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0 } },
> + { EXYNOS5433_APOLLO_CPU0_SYS_PWR_REG, { 0x0, 0x0, 0x8 } },
> + { EXYNOS5433_DIS_IRQ_APOLLO_CPU0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0 } },
> + { EXYNOS5433_APOLLO_CPU1_SYS_PWR_REG, { 0x0, 0x0, 0x8 } },
> + { EXYNOS5433_DIS_IRQ_APOLLO_CPU1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0 } },
> + { EXYNOS5433_APOLLO_CPU2_SYS_PWR_REG, { 0x0, 0x0, 0x8 } },
> + { EXYNOS5433_DIS_IRQ_APOLLO_CPU2_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0 } },
> + { EXYNOS5433_APOLLO_CPU3_SYS_PWR_REG, { 0x0, 0x0, 0x8 } },
> + { EXYNOS5433_DIS_IRQ_APOLLO_CPU3_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0 } },
> + { EXYNOS5433_ATLAS_NONCPU_SYS_PWR_REG, { 0x0, 0x0, 0x8 } },
> + { EXYNOS5433_APOLLO_NONCPU_SYS_PWR_REG, { 0x0, 0x0, 0x8 } },
> + { EXYNOS5433_A5IS_SYS_PWR_REG, { 0x0, 0x0, 0x0 } },
> + { EXYNOS5433_DIS_IRQ_A5IS_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0 } },
> + { EXYNOS5433_DIS_IRQ_A5IS_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0 } },
> + { EXYNOS5433_ATLAS_L2_SYS_PWR_REG, { 0x0, 0x0, 0x7 } },
> + { EXYNOS5433_APOLLO_L2_SYS_PWR_REG, { 0x0, 0x0, 0x7 } },
> + { EXYNOS5433_CLKSTOP_CMU_TOP_SYS_PWR_REG, { 0x1, 0x0, 0x0 } },
> + { EXYNOS5433_CLKRUN_CMU_TOP_SYS_PWR_REG, { 0x1, 0x0, 0x0 } },
> + { EXYNOS5433_RESET_CMU_TOP_SYS_PWR_REG, { 0x1, 0x0, 0x0 } },
> + { EXYNOS5433_RESET_CPUCLKSTOP_SYS_PWR_REG, { 0x1, 0x1, 0x0 } },
> + { EXYNOS5433_CLKSTOP_CMU_MIF_SYS_PWR_REG, { 0x1, 0x0, 0x0 } },
> + { EXYNOS5433_CLKRUN_CMU_MIF_SYS_PWR_REG, { 0x1, 0x1, 0x0 } },
> + { EXYNOS5433_RESET_CMU_MIF_SYS_PWR_REG, { 0x1, 0x0, 0x0 } },
> + { EXYNOS5433_DDRPHY_DLLLOCK_SYS_PWR_REG, { 0x1, 0x1, 0x1 } },
> + { EXYNOS5433_DISABLE_PLL_CMU_TOP_SYS_PWR_REG, { 0x1, 0x0, 0x0 } },
> + { EXYNOS5433_DISABLE_PLL_AUD_PLL_SYS_PWR_REG, { 0x1, 0x1, 0x0 } },
> + { EXYNOS5433_DISABLE_PLL_CMU_MIF_SYS_PWR_REG, { 0x1, 0x0, 0x0 } },
> + { EXYNOS5433_TOP_BUS_SYS_PWR_REG, { 0x7, 0x0, 0x0 } },
> + { EXYNOS5433_TOP_RETENTION_SYS_PWR_REG, { 0x1, 0x0, 0x1 } },
> + { EXYNOS5433_TOP_PWR_SYS_PWR_REG, { 0x3, 0x0, 0x3 } },
> + { EXYNOS5433_TOP_BUS_MIF_SYS_PWR_REG, { 0x7, 0x0, 0x0 } },
> + { EXYNOS5433_TOP_RETENTION_MIF_SYS_PWR_REG, { 0x1, 0x0, 0x1 } },
> + { EXYNOS5433_TOP_PWR_MIF_SYS_PWR_REG, { 0x3, 0x0, 0x3 } },
> + { EXYNOS5433_LOGIC_RESET_SYS_PWR_REG, { 0x1, 0x0, 0x0 } },
> + { EXYNOS5433_OSCCLK_GATE_SYS_PWR_REG, { 0x1, 0x0, 0x1 } },
> + { EXYNOS5433_SLEEP_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0 } },
> + { EXYNOS5433_LOGIC_RESET_MIF_SYS_PWR_REG, { 0x1, 0x0, 0x0 } },
> + { EXYNOS5433_OSCCLK_GATE_MIF_SYS_PWR_REG, { 0x1, 0x0, 0x1 } },
> + { EXYNOS5433_SLEEP_RESET_MIF_SYS_PWR_REG, { 0x1, 0x1, 0x0 } },
> + { EXYNOS5433_MEMORY_TOP_SYS_PWR_REG, { 0x3, 0x0, 0x0 } },
> + { EXYNOS5433_PAD_RETENTION_LPDDR3_SYS_PWR_REG, { 0x1, 0x0, 0x0 } },
> + { EXYNOS5433_PAD_RETENTION_JTAG_SYS_PWR_REG, { 0x1, 0x0, 0x0 } },
> + { EXYNOS5433_PAD_RETENTION_TOP_SYS_PWR_REG, { 0x1, 0x0, 0x0 } },
> + { EXYNOS5433_PAD_RETENTION_UART_SYS_PWR_REG, { 0x1, 0x0, 0x0 } },
> + { EXYNOS5433_PAD_RETENTION_EBIA_SYS_PWR_REG, { 0x1, 0x0, 0x0 } },
> + { EXYNOS5433_PAD_RETENTION_EBIB_SYS_PWR_REG, { 0x1, 0x0, 0x0 } },
> + { EXYNOS5433_PAD_RETENTION_SPI_SYS_PWR_REG, { 0x1, 0x0, 0x0 } },
> + { EXYNOS5433_PAD_RETENTION_MIF_SYS_PWR_REG, { 0x1, 0x0, 0x0 } },
> + { EXYNOS5433_PAD_ISOLATION_SYS_PWR_REG, { 0x1, 0x0, 0x1 } },
> + { EXYNOS5433_PAD_RETENTION_USBXTI_SYS_PWR_REG, { 0x1, 0x0, 0x0 } },
> + { EXYNOS5433_PAD_RETENTION_BOOTLDO_SYS_PWR_REG, { 0x1, 0x0, 0x0 } },
> + { EXYNOS5433_PAD_ISOLATION_MIF_SYS_PWR_REG, { 0x1, 0x0, 0x1 } },
> + { EXYNOS5433_PAD_RETENTION_FSYSGENIO_SYS_PWR_REG, { 0x1, 0x0, 0x0 } },
> + { EXYNOS5433_PAD_ALV_SEL_SYS_PWR_REG, { 0x1, 0x0, 0x0 } },
> + { EXYNOS5433_XXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0 } },
> + { EXYNOS5433_XXTI26_SYS_PWR_REG, { 0x1, 0x0, 0x0 } },
> + { EXYNOS5433_EXT_REGULATOR_SYS_PWR_REG, { 0x1, 0x1, 0x0 } },
> + { EXYNOS5433_GPIO_MODE_SYS_PWR_REG, { 0x1, 0x0, 0x0 } },
> + { EXYNOS5433_GPIO_MODE_FSYS0_SYS_PWR_REG, { 0x1, 0x0, 0x0 } },
> + { EXYNOS5433_GPIO_MODE_MIF_SYS_PWR_REG, { 0x1, 0x0, 0x0 } },
> + { EXYNOS5433_GPIO_MODE_AUD_SYS_PWR_REG, { 0x1, 0x1, 0x0 } },
> + { EXYNOS5433_GSCL_SYS_PWR_REG, { 0xF, 0x0, 0x0 } },
> + { EXYNOS5433_CAM0_SYS_PWR_REG, { 0xF, 0x0, 0x0 } },
> + { EXYNOS5433_MSCL_SYS_PWR_REG, { 0xF, 0x0, 0x0 } },
> + { EXYNOS5433_G3D_SYS_PWR_REG, { 0xF, 0x0, 0x0 } },
> + { EXYNOS5433_DISP_SYS_PWR_REG, { 0xF, 0x0, 0x0 } },
> + { EXYNOS5433_CAM1_SYS_PWR_REG, { 0xF, 0x0, 0x0 } },
> + { EXYNOS5433_AUD_SYS_PWR_REG, { 0xF, 0xF, 0x0 } },
> + { EXYNOS5433_FSYS_SYS_PWR_REG, { 0xF, 0x0, 0x0 } },
> + { EXYNOS5433_BUS2_SYS_PWR_REG, { 0xF, 0x0, 0x0 } },
> + { EXYNOS5433_G2D_SYS_PWR_REG, { 0xF, 0x0, 0x0 } },
> + { EXYNOS5433_ISP0_SYS_PWR_REG, { 0xF, 0x0, 0x0 } },
> + { EXYNOS5433_MFC_SYS_PWR_REG, { 0xF, 0x0, 0x0 } },
> + { EXYNOS5433_HEVC_SYS_PWR_REG, { 0xF, 0x0, 0x0 } },
> + { EXYNOS5433_RESET_SLEEP_FSYS_SYS_PWR_REG, { 0x1, 0x1, 0x0 } },
> + { EXYNOS5433_RESET_SLEEP_BUS2_SYS_PWR_REG, { 0x1, 0x1, 0x0 } },
> + { PMU_TABLE_END, },
> +};
> +
> +static unsigned int const exynos5433_list_feed[] = {
> + EXYNOS5433_ATLAS_NONCPU_OPTION,
> + EXYNOS5433_APOLLO_NONCPU_OPTION,
> + EXYNOS5433_TOP_PWR_OPTION,
> + EXYNOS5433_TOP_PWR_MIF_OPTION,
> + EXYNOS5433_AUD_OPTION,
> + EXYNOS5433_CAM0_OPTION,
> + EXYNOS5433_DISP_OPTION,
> + EXYNOS5433_G2D_OPTION,
> + EXYNOS5433_G3D_OPTION,
> + EXYNOS5433_HEVC_OPTION,
> + EXYNOS5433_MSCL_OPTION,
> + EXYNOS5433_MFC_OPTION,
> + EXYNOS5433_GSCL_OPTION,
> + EXYNOS5433_FSYS_OPTION,
> + EXYNOS5433_ISP_OPTION,
> + EXYNOS5433_BUS2_OPTION,
> +};
> +
> +static unsigned int const exynos5433_list_pad_retention[] = {
> + EXYNOS5433_PAD_RETENTION_LPDDR3_OPTION,
> + EXYNOS5433_PAD_RETENTION_AUD_OPTION,
> + EXYNOS5433_PAD_RETENTION_MMC2_OPTION,
> + EXYNOS5433_PAD_RETENTION_TOP_OPTION,
> + EXYNOS5433_PAD_RETENTION_UART_OPTION,
> + EXYNOS5433_PAD_RETENTION_MMC0_OPTION,
> + EXYNOS5433_PAD_RETENTION_MMC1_OPTION,
> + EXYNOS5433_PAD_RETENTION_EBIA_OPTION,
> + EXYNOS5433_PAD_RETENTION_EBIB_OPTION,
> + EXYNOS5433_PAD_RETENTION_SPI_OPTION,
> + EXYNOS5433_PAD_RETENTION_MIF_OPTION,
> + EXYNOS5433_PAD_RETENTION_USBXTI_OPTION,
> + EXYNOS5433_PAD_RETENTION_BOOTLDO_OPTION,
> + EXYNOS5433_PAD_RETENTION_UFS_OPTION,
> + EXYNOS5433_PAD_RETENTION_FSYSGENIO_OPTION,
Looks like conflicting with existing
drivers/pinctrl/samsung/pinctrl-exynos-arm64.c... and probably this
should be part of pinctrl driver's suspend/resume paths.
> +};
> +
> +static void exynos5433_set_wakeupmask(enum sys_powerdown mode)
> +{
> + u32 intmask = 0;
> +
> + pmu_raw_writel(exynos_get_eint_wake_mask(),
> + EXYNOS5433_EINT_WAKEUP_MASK);
> +
> + /* Disable WAKEUP event monitor */
> + intmask = pmu_raw_readl(EXYNOS5433_WAKEUP_MASK);
> + intmask &= ~(1 << 31);
This should have a define. Maybe it is an already defined field like
S5P_CORE_AUTOWAKEUP_EN or S5P_PS_HOLD_EN?
> + pmu_raw_writel(intmask, EXYNOS5433_WAKEUP_MASK);
> +
> + pmu_raw_writel(0xFFFF0000, EXYNOS5433_WAKEUP_MASK2);
> + pmu_raw_writel(0xFFFF0000, EXYNOS5433_WAKEUP_MASK3);
Both need explaining what you are masking, preferably by appropriate
comment and maybe also define for raw constants.
> +}
> +
> +static void exynos5433_pmu_central_seq(bool enable)
> +{
> + unsigned int tmp;
> +
> + tmp = pmu_raw_readl(EXYNOS5433_CENTRAL_SEQ_CONFIGURATION);
> + if (enable)
> + tmp &= ~EXYNOS5433_CENTRALSEQ_PWR_CFG;
> + else
> + tmp |= EXYNOS5433_CENTRALSEQ_PWR_CFG;
> + pmu_raw_writel(tmp, EXYNOS5433_CENTRAL_SEQ_CONFIGURATION);
> +
> + tmp = pmu_raw_readl(EXYNOS5433_CENTRAL_SEQ_MIF_CONFIGURATION);
> + if (enable)
> + tmp &= ~EXYNOS5433_CENTRALSEQ_PWR_CFG;
> + else
> + tmp |= EXYNOS5433_CENTRALSEQ_PWR_CFG;
> + pmu_raw_writel(tmp, EXYNOS5433_CENTRAL_SEQ_MIF_CONFIGURATION);
> +}
> +
> +static void exynos5433_pmu_pad_retention_release(void)
> +{
> + unsigned int tmp;
> + int i;
unsigned int i
> +
> + for (i = 0 ; i < ARRAY_SIZE(exynos5433_list_pad_retention) ; i++) {
> + tmp = pmu_raw_readl(exynos5433_list_pad_retention[i]);
> + tmp |= EXYNOS5433_INITIATE_WAKEUP_FROM_LOWPOWER;
> + pmu_raw_writel(tmp, exynos5433_list_pad_retention[i]);
> + }
> +}
> +
> +static void exynos5433_pmu_init(void)
> +{
> + unsigned int tmp;
> + int i, cluster, cpu;
unsigned int i
> +
> + /* Enable non retention flip-flop reset for wakeup */
> + tmp = pmu_raw_readl(EXYNOS5433_PMU_SPARE0);
> + tmp |= EXYNOS5433_EN_NONRET_RESET;
> + pmu_raw_writel(tmp, EXYNOS5433_PMU_SPARE0);
This is spare register. Who is using it? Firmware? Please add its
usage also in Documentation/arm/Samsung/Bootloader-interface.txt.
> +
> + /* Enable only SC_FEEDBACK for the register list */
> + for (i = 0 ; i < ARRAY_SIZE(exynos5433_list_feed) ; i++) {
> + tmp = pmu_raw_readl(exynos5433_list_feed[i]);
> + tmp &= ~EXYNOS5_USE_SC_COUNTER;
> + tmp |= EXYNOS5_USE_SC_FEEDBACK;
> + pmu_raw_writel(tmp, exynos5433_list_feed[i]);
> + }
> +
> + /*
> + * Disable automatic L2 flush, Disable L2 retention and
> + * Enable STANDBYWFIL2, ACE/ACP
> + */
> + for (cluster = 0; cluster < 2; cluster++) {
> + tmp = pmu_raw_readl(EXYNOS5433_ATLAS_L2_OPTION + (cluster * 0x20));
I would prefer to follow the convention for similar registers for cores, like:
EXYNOS_ARM_CORE_CONFIGURATION
EXYNOS_ARM_CORE_STATUS
This moves the offset into the header, along to other register offsets.
> + tmp &= ~(EXYNOS5433_USE_AUTO_L2FLUSHREQ | EXYNOS5433_USE_RETENTION);
> +
> + if (cluster == 0) {
> + tmp |= (EXYNOS5433_USE_STANDBYWFIL2 |
> + EXYNOS5433_USE_DEACTIVATE_ACE |
> + EXYNOS5433_USE_DEACTIVATE_ACP);
> + }
> + pmu_raw_writel(tmp, EXYNOS5433_ATLAS_L2_OPTION + (cluster * 0x20));
> + }
> +
> + /*
> + * Enable both SC_COUNTER and SC_FEEDBACK for the CPUs
> + * Use STANDBYWFI and SMPEN to indicate that core is ready to enter
> + * low power mode
> + */
> + for (cpu = 0; cpu < 8; cpu++) {
> + tmp = pmu_raw_readl(EXYNOS5433_CPU_OPTION(cpu));
> + tmp |= (EXYNOS5_USE_SC_FEEDBACK | EXYNOS5_USE_SC_COUNTER);
> + tmp |= EXYNOS5433_USE_SMPEN;
> + tmp |= EXYNOS5433_USE_STANDBYWFI;
> + tmp &= ~EXYNOS5433_USE_STANDBYWFE;
> + pmu_raw_writel(tmp, EXYNOS5433_CPU_OPTION(cpu));
> +
> + tmp = pmu_raw_readl(EXYNOS5433_CPU_DURATION(cpu));
> + tmp |= EXYNOS5433_DUR_WAIT_RESET;
> + tmp &= ~EXYNOS5433_DUR_SCALL;
> + tmp |= EXYNOS5433_DUR_SCALL_VALUE;
> + pmu_raw_writel(tmp, EXYNOS5433_CPU_DURATION(cpu));
> + }
> +
> + /* Skip atlas block power-off during automatic power down sequence */
> + tmp = pmu_raw_readl(EXYNOS5433_ATLAS_CPUSEQUENCER_OPTION);
> + tmp |= EXYNOS5433_SKIP_BLK_PWR_DOWN;
> + pmu_raw_writel(tmp, EXYNOS5433_ATLAS_CPUSEQUENCER_OPTION);
> +
> + /* Limit in-rush current during local power up of cores */
> + tmp = pmu_raw_readl(EXYNOS5433_UP_SCHEDULER);
> + tmp |= EXYNOS5433_ENABLE_ATLAS_CPU;
> + pmu_raw_writel(tmp, EXYNOS5433_UP_SCHEDULER);
> +}
> +
> +static void exynos5433_powerdown_conf(enum sys_powerdown mode)
> +{
> + switch (mode) {
> + case SYS_SLEEP:
> + exynos5433_set_wakeupmask(mode);
> + exynos5433_pmu_central_seq(true);
> + break;
> + default:
> + break;
> + };
> +}
> +
> +static void exynos5433_powerup_conf(enum sys_powerdown mode)
> +{
> + unsigned int wakeup;
> +
> + switch (mode) {
> + case SYS_SLEEP:
> + wakeup = pmu_raw_readl(EXYNOS5433_CENTRAL_SEQ_CONFIGURATION);
> + wakeup &= EXYNOS5433_CENTRALSEQ_PWR_CFG;
> + if (wakeup)
> + exynos5433_pmu_pad_retention_release();
> + else
> + exynos5433_pmu_central_seq(false);
I do not understand what you want to achieve here. Re-suspend?
> + break;
> + default:
> + break;
> + };
> +}
> +
> +const struct exynos_pmu_data exynos5433_pmu_data = {
> + .pmu_config = exynos5433_pmu_config,
> + .pmu_init = exynos5433_pmu_init,
> + .powerdown_conf = exynos5433_powerdown_conf,
> + .powerup_conf = exynos5433_powerup_conf,
> +};
> diff --git a/include/linux/soc/samsung/exynos-regs-pmu.h b/include/linux/soc/samsung/exynos-regs-pmu.h
> index bebdde5dccd6..93a52d133ba1 100644
> --- a/include/linux/soc/samsung/exynos-regs-pmu.h
> +++ b/include/linux/soc/samsung/exynos-regs-pmu.h
> @@ -645,7 +645,110 @@
> | EXYNOS5420_KFC_USE_STANDBY_WFI3)
>
> /* For EXYNOS5433 */
> +#define EXYNOS5433_UP_SCHEDULER (0x0120)
> +#define EXYNOS5433_CENTRAL_SEQ_CONFIGURATION (0x0200)
> +#define EXYNOS5433_CENTRAL_SEQ_MIF_CONFIGURATION (0x0240)
> +#define EXYNOS5433_EINT_WAKEUP_MASK (0x060C)
> +#define EXYNOS5433_WAKEUP_MASK (0x0610)
> +#define EXYNOS5433_WAKEUP_MASK2 (0x0614)
> +#define EXYNOS5433_WAKEUP_MASK3 (0x0618)
> +#define EXYNOS5433_EINT_WAKEUP_MASK1 (0x062C)
> #define EXYNOS5433_USBHOST30_PHY_CONTROL (0x0728)
> +#define EXYNOS5433_PMU_SPARE0 (0x0900)
> +#define EXYNOS5433_ATLAS_CPU0_SYS_PWR_REG (0x1000)
> +#define EXYNOS5433_DIS_IRQ_ATLAS_CPU0_CENTRAL_SYS_PWR_REG (0x1008)
> +#define EXYNOS5433_ATLAS_CPU1_SYS_PWR_REG (0x1010)
> +#define EXYNOS5433_DIS_IRQ_ATLAS_CPU1_CENTRAL_SYS_PWR_REG (0x1018)
> +#define EXYNOS5433_ATLAS_CPU2_SYS_PWR_REG (0x1020)
> +#define EXYNOS5433_DIS_IRQ_ATLAS_CPU2_CENTRAL_SYS_PWR_REG (0x1028)
> +#define EXYNOS5433_ATLAS_CPU3_SYS_PWR_REG (0x1030)
> +#define EXYNOS5433_DIS_IRQ_ATLAS_CPU3_CENTRAL_SYS_PWR_REG (0x1038)
> +#define EXYNOS5433_APOLLO_CPU0_SYS_PWR_REG (0x1040)
> +#define EXYNOS5433_DIS_IRQ_APOLLO_CPU0_CENTRAL_SYS_PWR_REG (0x1048)
> +#define EXYNOS5433_APOLLO_CPU1_SYS_PWR_REG (0x1050)
> +#define EXYNOS5433_DIS_IRQ_APOLLO_CPU1_CENTRAL_SYS_PWR_REG (0x1058)
> +#define EXYNOS5433_APOLLO_CPU2_SYS_PWR_REG (0x1060)
> +#define EXYNOS5433_DIS_IRQ_APOLLO_CPU2_CENTRAL_SYS_PWR_REG (0x1068)
> +#define EXYNOS5433_APOLLO_CPU3_SYS_PWR_REG (0x1070)
> +#define EXYNOS5433_DIS_IRQ_APOLLO_CPU3_CENTRAL_SYS_PWR_REG (0x1078)
> +#define EXYNOS5433_ATLAS_NONCPU_SYS_PWR_REG (0x1080)
> +#define EXYNOS5433_ATLAS_L2_SYS_PWR_REG (0x10C0)
> +#define EXYNOS5433_APOLLO_L2_SYS_PWR_REG (0x10C4)
> +#define EXYNOS5433_APOLLO_NONCPU_SYS_PWR_REG (0x1084)
> +#define EXYNOS5433_A5IS_SYS_PWR_REG (0x10B0)
> +#define EXYNOS5433_DIS_IRQ_A5IS_LOCAL_SYS_PWR_REG (0x10B4)
> +#define EXYNOS5433_DIS_IRQ_A5IS_CENTRAL_SYS_PWR_REG (0x10B8)
> +#define EXYNOS5433_CLKSTOP_CMU_TOP_SYS_PWR_REG (0x1100)
> +#define EXYNOS5433_CLKRUN_CMU_TOP_SYS_PWR_REG (0x1104)
> +#define EXYNOS5433_RESET_CMU_TOP_SYS_PWR_REG (0x110C)
> +#define EXYNOS5433_RESET_CPUCLKSTOP_SYS_PWR_REG (0x111C)
> +#define EXYNOS5433_CLKSTOP_CMU_MIF_SYS_PWR_REG (0x1120)
> +#define EXYNOS5433_CLKRUN_CMU_MIF_SYS_PWR_REG (0x1124)
> +#define EXYNOS5433_RESET_CMU_MIF_SYS_PWR_REG (0x112C)
> +#define EXYNOS5433_DDRPHY_DLLLOCK_SYS_PWR_REG (0x1138)
> +#define EXYNOS5433_DISABLE_PLL_CMU_TOP_SYS_PWR_REG (0x1140)
> +#define EXYNOS5433_DISABLE_PLL_AUD_PLL_SYS_PWR_REG (0x1144)
> +#define EXYNOS5433_DISABLE_PLL_CMU_MIF_SYS_PWR_REG (0x1160)
> +#define EXYNOS5433_TOP_BUS_SYS_PWR_REG (0x1180)
> +#define EXYNOS5433_TOP_RETENTION_SYS_PWR_REG (0x1184)
> +#define EXYNOS5433_TOP_PWR_SYS_PWR_REG (0x1188)
> +#define EXYNOS5433_TOP_BUS_MIF_SYS_PWR_REG (0x1190)
> +#define EXYNOS5433_TOP_RETENTION_MIF_SYS_PWR_REG (0x1194)
> +#define EXYNOS5433_TOP_PWR_MIF_SYS_PWR_REG (0x1198)
> +#define EXYNOS5433_LOGIC_RESET_SYS_PWR_REG (0x11A0)
> +#define EXYNOS5433_OSCCLK_GATE_SYS_PWR_REG (0x11A4)
> +#define EXYNOS5433_SLEEP_RESET_SYS_PWR_REG (0x11A8)
> +#define EXYNOS5433_LOGIC_RESET_MIF_SYS_PWR_REG (0x11B0)
> +#define EXYNOS5433_OSCCLK_GATE_MIF_SYS_PWR_REG (0x11B4)
> +#define EXYNOS5433_SLEEP_RESET_MIF_SYS_PWR_REG (0x11B8)
> +#define EXYNOS5433_MEMORY_TOP_SYS_PWR_REG (0x11C0)
> +#define EXYNOS5433_PAD_RETENTION_LPDDR3_SYS_PWR_REG (0x1200)
> +#define EXYNOS5433_PAD_RETENTION_JTAG_SYS_PWR_REG (0x1208)
> +#define EXYNOS5433_PAD_RETENTION_TOP_SYS_PWR_REG (0x1220)
> +#define EXYNOS5433_PAD_RETENTION_UART_SYS_PWR_REG (0x1224)
> +#define EXYNOS5433_PAD_RETENTION_EBIA_SYS_PWR_REG (0x1230)
> +#define EXYNOS5433_PAD_RETENTION_EBIB_SYS_PWR_REG (0x1234)
> +#define EXYNOS5433_PAD_RETENTION_SPI_SYS_PWR_REG (0x1238)
> +#define EXYNOS5433_PAD_RETENTION_MIF_SYS_PWR_REG (0x123C)
> +#define EXYNOS5433_PAD_ISOLATION_SYS_PWR_REG (0x1240)
> +#define EXYNOS5433_PAD_RETENTION_USBXTI_SYS_PWR_REG (0x1244)
> +#define EXYNOS5433_PAD_RETENTION_BOOTLDO_SYS_PWR_REG (0x1248)
> +#define EXYNOS5433_PAD_ISOLATION_MIF_SYS_PWR_REG (0x1250)
> +#define EXYNOS5433_PAD_RETENTION_FSYSGENIO_SYS_PWR_REG (0x1254)
> +#define EXYNOS5433_PAD_ALV_SEL_SYS_PWR_REG (0x1260)
> +#define EXYNOS5433_XXTI_SYS_PWR_REG (0x1284)
> +#define EXYNOS5433_XXTI26_SYS_PWR_REG (0x1288)
> +#define EXYNOS5433_EXT_REGULATOR_SYS_PWR_REG (0x12C0)
> +#define EXYNOS5433_GPIO_MODE_SYS_PWR_REG (0x1300)
> +#define EXYNOS5433_GPIO_MODE_FSYS0_SYS_PWR_REG (0x1304)
> +#define EXYNOS5433_GPIO_MODE_MIF_SYS_PWR_REG (0x1320)
> +#define EXYNOS5433_GPIO_MODE_AUD_SYS_PWR_REG (0x1340)
> +#define EXYNOS5433_GSCL_SYS_PWR_REG (0x1400)
> +#define EXYNOS5433_CAM0_SYS_PWR_REG (0x1404)
> +#define EXYNOS5433_MSCL_SYS_PWR_REG (0x1408)
> +#define EXYNOS5433_G3D_SYS_PWR_REG (0x140C)
> +#define EXYNOS5433_DISP_SYS_PWR_REG (0x1410)
> +#define EXYNOS5433_CAM1_SYS_PWR_REG (0x1414)
> +#define EXYNOS5433_AUD_SYS_PWR_REG (0x1418)
> +#define EXYNOS5433_FSYS_SYS_PWR_REG (0x141C)
> +#define EXYNOS5433_BUS2_SYS_PWR_REG (0x1420)
> +#define EXYNOS5433_G2D_SYS_PWR_REG (0x1424)
> +#define EXYNOS5433_ISP0_SYS_PWR_REG (0x1428)
> +#define EXYNOS5433_MFC_SYS_PWR_REG (0x1430)
> +#define EXYNOS5433_HEVC_SYS_PWR_REG (0x1438)
> +#define EXYNOS5433_RESET_SLEEP_FSYS_SYS_PWR_REG (0x15DC)
> +#define EXYNOS5433_RESET_SLEEP_BUS2_SYS_PWR_REG (0x15E0)
> +#define EXYNOS5433_ATLAS_CPU0_OPTION (0x2008)
> +#define EXYNOS5433_CPU_OPTION(_nr) (EXYNOS5433_ATLAS_CPU0_OPTION + (_nr) * 0x80)
> +#define EXYNOS5433_ATLAS_CPU0_DURATION0 (0x2010)
> +#define EXYNOS5433_CPU_DURATION(_nr) (EXYNOS5433_ATLAS_CPU0_DURATION0 + (_nr) * 0x80)
> +#define EXYNOS5433_ATLAS_NONCPU_OPTION (0x2408)
> +#define EXYNOS5433_APOLLO_NONCPU_OPTION (0x2428)
> +#define EXYNOS5433_ATLAS_CPUSEQUENCER_OPTION (0x2488)
> +#define EXYNOS5433_ATLAS_L2_OPTION (0x2608)
> +#define EXYNOS5433_TOP_PWR_MIF_OPTION (0x2CC8)
> +#define EXYNOS5433_TOP_PWR_OPTION (0x2C48)
> +#define EXYNOS5433_PAD_RETENTION_LPDDR3_OPTION (0x3008)
> #define EXYNOS5433_PAD_RETENTION_AUD_OPTION (0x3028)
> #define EXYNOS5433_PAD_RETENTION_MMC2_OPTION (0x30C8)
> #define EXYNOS5433_PAD_RETENTION_TOP_OPTION (0x3108)
> @@ -660,5 +763,50 @@
> #define EXYNOS5433_PAD_RETENTION_BOOTLDO_OPTION (0x3248)
> #define EXYNOS5433_PAD_RETENTION_UFS_OPTION (0x3268)
> #define EXYNOS5433_PAD_RETENTION_FSYSGENIO_OPTION (0x32A8)
> +#define EXYNOS5433_PS_HOLD_CONTROL (0x330C)
> +#define EXYNOS5433_GSCL_OPTION (0x4008)
> +#define EXYNOS5433_CAM0_OPTION (0x4028)
> +#define EXYNOS5433_MSCL_OPTION (0x4048)
> +#define EXYNOS5433_G3D_OPTION (0x4068)
> +#define EXYNOS5433_DISP_OPTION (0x4088)
> +#define EXYNOS5433_AUD_OPTION (0x40C8)
> +#define EXYNOS5433_FSYS_OPTION (0x40E8)
> +#define EXYNOS5433_BUS2_OPTION (0x4108)
> +#define EXYNOS5433_G2D_OPTION (0x4128)
> +#define EXYNOS5433_ISP_OPTION (0x4148)
> +#define EXYNOS5433_MFC_OPTION (0x4188)
> +#define EXYNOS5433_HEVC_OPTION (0x41C8)
> +
> +/* EXYNOS5433_PMU_SPARE0 */
> +#define EXYNOS5433_EN_NONRET_RESET (1 << 0)
Use BIT(0) here and in other places.
Best regards,
Krzysztof
> +
> +/* EXYNOS5433_CENTRAL_SEQ_CONFIGURATION */
> +#define EXYNOS5433_CENTRALSEQ_PWR_CFG (0x1 << 16)
> +
> +/* EXYNOS5433_ATLAS_L2_OPTION */
> +#define EXYNOS5433_USE_DEACTIVATE_ACE (0x1 << 19)
> +#define EXYNOS5433_USE_DEACTIVATE_ACP (0x1 << 18)
> +#define EXYNOS5433_USE_AUTO_L2FLUSHREQ (0x1 << 17)
> +#define EXYNOS5433_USE_STANDBYWFIL2 (0x1 << 16)
> +#define EXYNOS5433_USE_RETENTION (0x1 << 4)
> +
> +/* EXYNOS5433_CPU_OPTION */
> +#define EXYNOS5433_USE_SMPEN (0x1 << 28)
> +#define EXYNOS5433_USE_STANDBYWFE (0x1 << 24)
> +#define EXYNOS5433_USE_STANDBYWFI (0x1 << 16)
> +
> +/* EXYNOS5433_PAD_RETENTION_*_OPTION */
> +#define EXYNOS5433_INITIATE_WAKEUP_FROM_LOWPOWER (0x1 << 28)
> +
> +/* EXYNOS5433_CPU_DURATION */
> +#define EXYNOS5433_DUR_WAIT_RESET (0xF << 20)
> +#define EXYNOS5433_DUR_SCALL (0xF << 4)
> +#define EXYNOS5433_DUR_SCALL_VALUE (0x1 << 4)
> +
> +/* EXYNOS5433_ATLAS_CPUSEQUENCER_OPTION */
> +#define EXYNOS5433_SKIP_BLK_PWR_DOWN (0x1 << 8)
> +
> +/* EXYNOS5433_UP_SCHEDULER */
> +#define EXYNOS5433_ENABLE_ATLAS_CPU (0x1 << 0)
>
> #endif /* __LINUX_SOC_EXYNOS_REGS_PMU_H */
> --
> 1.9.1
>
More information about the linux-arm-kernel
mailing list